Coavas Frosted Glass Window Privacy Film, Static Cling, Gray 35.4"x118.1"

I installed this myself, and am satisfied with the product. I have installed a few of these before and I think the quality of this brand is good. It's pliable and has a bit of stretch, so it's not easily creased or torn when handling it. The measurements were also correct. I had no issues with installation; it's just a project that you have to take in steps and have patience. I used a water/soap mixture and squeegee and it looks great. We have this great wall of sliders that I love for the natural light, but not so much for privacy. Our house is on a hill and on the side of the sidewalk (in a very busy neighborhood), so any time someone walks by, they can see into our house if they want to. And the two houses behind us are up higher, so they can see in as well. During the day, there's usually some glare that helps, but at night, it's a direct view into our living room. So I wanted something that would be good for both day and night, which took away the tinting or reflective options as those don't help with night privacy. Also, one of the houses behind us decided to paint their brick a bright white the week they moved in, and when the sun hits it, it blinds us when we're sitting on the couch in our living room. This film has solved the privacy concerns as well as the bright effing house that blinds us. Yet it still lets in light, which was something we didn't want to lose. The white color looks great with our white-trim sliders. I bought this item on sale for under $50. For the width and length and the quality, I am very satisfied and recommend.

Am more than pleased with this product. I have nosey neighbors and enjoy having the natural light come through my window in the morning. I can’t see through it much other than shapes of things outside. Definitely blocking out anyone from peeking around. Love the color and texture of the film. It looks great on my window during the day and lets in sunlight surprisingly well. I can’t speak if it helps with heat but I imagine it helps absorb a little. So far no peeling issues or edges peeling up. I’m a fan and have a bunch extra which will be used again. I install tint for a living so this was not a new process to me but I found the application of this frosted film would be easy for anyone with a card to use as a squeegee or an actual squeegee you may happen to have. Personally I used isopropyl alcohol to spray on the films cling side and then on the window, which was cleaned with the isopropyl before trying to apply. I would suggest cleaning the heck out of the glass, less change for bubble spots from trash and will help prevent it from peeling off. I’ve tried other brands in the past that wouldn’t even stick to a perfectly cleaned with a non oil based cleaner, like isopropyl or vinegar. Cut rough to fit sized piece out which worked out well for me as my windows were just under the purchased width for each pane. Spray your water on the windows wipe a card across the middle of the film up and then across to keep it from moving anymore while still giving ability to form if it did move out of place. Then start at the top of the film and work your wipe across with some kind of card with a little pressure to push out the water; best way to get it all out is go halfway of where the water is under the surface of where you last swiped and use the halfway point as your point to start each swipe across the film so if any water bubbles go up your cards there to knock them all down and out of the sides. Hardest part is cutting the shape after you get the majority sticking in place. Fresh razor is your best friend. Using a ruler/ straight edge can help lay the overlap off window to go all the way to each corner with your cut lines.

Worked well for creating privacy on my front door. These are small glass panes so it was easy to install and created the privacy while still letting light in. Only issue is there are small air bubbles which I can’t get rid of but they really don’t show too much. So good enough for me.

We needed a simple non-permanent solution for our sliding glass doors to solve our issue with our dogs barking aggressively anytime we went outside to use our pool which made the pool experience anything but relaxing and enjoyable with constant barking. I still wanted to be able to see outside to monitor my kids in the pool or to see the dogs when they are outside so I only went 60% up the glass door. Ive never applied anything like this before but I measured and cut the film, attached 2 of the stickers to one side of the film to help place it, sprayed the glass generously with soapy water, and situated it into place. My son helped but for my size project, one person can do it alone. I ordered a separate accessory kit with a utility knife, felt squeegee and a few other things inside. The utility knife made it easy to trim off the places I needed to make adjustments. Im very satisfied with the ease of application and how nice this looks on my doors. My dogs are unable to see put now which has helped calm them down some although their other senses- like hearing- have amped up so they still bark some because they cant see us but they hear us outside however it is drastically reduced. I will be using the remnants to do my windows and I will be ordering more to finish my windows and another door.

Takes a few minutes to apply, but then it absolutely diffuses the light. It is nice and warm light that it allows. It makes it look annealed.

Film was very easy to install. I added a few drops of Dawn dish soap to the spray bottle of water, as several others had recommended, and that worked well. The film was about 1/4" too short for my window, so I started at the bottom and worked my way up, leaving the small gap at the top where it is hardly noticeable. It has been up for several weeks now and is still holding perfectly, so I’ll be ordering a third piece for the top window. This replaced some janky-looking curtains that were originally covering the windows. My cats enjoyed pulling those curtains down, but so far, they haven’t bothered the film at all. It looks much cleaner and provides the privacy I wanted.

I purchased several rolls of this in the opacity called Pure. A few factors drove my purchasing decision: THE ABILITY TO GET IT QUICKLY, attractiveness, opacity (I wanted maximum light transfer), and ease of installation. This wasn't the quickest of deliveries, but I didn't have to wait awfully long for it, so that part of the transaction was acceptable. Unfortunately, when it did arrive as two separate orders, one of the rolls delivered to me was white instead of Pure. Irritated as all get out by this for reasons I'll explain in a minute, I referred back to my order, and whoever packed my orders just flat out sent the wrong item in white instead of the correct one in Pure. This is *really bad* because now, my windows now don't match, which just looks like a trashy after thought - and that's an aesthetic that I wasn't going for, so I'm definitely not pleased with that. I would have gone through the insanely inconvenient hassle that is a return on Amazon, except that my #1 reason for ordering this was that the delivery was quick. This was purchased to accommodate a foster dog with reactivity issues who was having a rough time with visuals outside of our house: I needed something fast for his needs, and something matching, with acceptable opacity and light transfer for mine. I was flat out stuck with what was sent to me, as by its delivery time, there just wasn't the luxury or time for a return. I'm still salty about it. To make things worse, the roll of white arrived with creases that penetrated the entire roll, which presents adhesion issues during install and gives you areas afterwards where the film doesn't cling (also displeased with that). Rolls that aren't perfect shouldn't ever leave the factory OR a third-party shipper due to the nature of the product. Lastly, none of my rolls are the lengths stated in the item's description. I measured all of my windows in advance and should have had enough left over for a few more small windows if I needed it; instead, I'm significantly short. All of these things combined means that I now have a large window that had to be "patched", and since my films don't match, it looks like a hot mess. If I'd have received everything in Pure as I'd ordered, this wouldn't be noticeable to anyone but me, but with all the mistakes combined, it makes me bitter every time I look at it. (Patchy windows look bad from both inside and out!) On the positive side, it does cling very nicely. If an area pulls away, just mist the area and squeegee again to remove bubbles. I suggest using a straight edge/T-square and razor blade knife for cutting crisp edges. Have a large area for triple checking your measurements and cutting. The protective film backing sticks a little too well, so be prepared to wrestle with it and become frustrated. You'll get it off eventually, but that was the worst part of putting it up. It repositions easily, so lining up edges and corners isn't a big deal if you find it's going crooked. Large windows require two people or the weight of the film will pull it down if you're trying to put it up alone. While I'm not big on having my windows covered, it's been a really handy solution for my purpose and it would be nice after investing the time to size and cut it all to be able to re-use it in the future, though I have no idea how you'd store it. I do like the way the Pure looks, but would only order again if I could be certain that I'd get the correct product in the actual length stated (this is too expensive to not get exactly what you've paid for!)

Good quality seem to stick to the window well and cannot see through. The only thing I will note is that peeling it off was hard and the tools that were supposed to help did not.

Excellent it contain adhesive to directly fix to the glass

Great product planning on buying a second one Very easy to use and definitely creates that privacy as mentioned

Chose this because of the great reviews. But it was a horrible experience. Firstly, I just couldn't separate the film from the sheet at the edge. Gave up after 10 minutes and called the Mrs. with longer nails. It was quite a struggle for her too. When we finally managed to, the protective sheet just couldn't peel off properly, tearing in multiple places after which it was impossible to remove the sheet. Tried 3 times. Had the same problem. In the end, my patience just gave away and I ended up dumping it in the bin. I'm surprised to see so many customers had it so easy. It was a real struggle for me and the Mrs. who tried too after I gave up. She called it quits after the second try. Defective/Fake product?

excelente producto y costo beneficio

المنتج الذي تم تسليمه غير عن المعلن عنه حيث انه تم توصيل مناج لاصق وخاص بتجليد الكتب وليس الزجاج