CURT 45797 Receiver Hitch Adapter, 2" Rise or Drop, 7,500-lb GTW

I'll be using this drop receiver with my ten-year-old Kuat Shepard on my Volvo XC60 recharge with drawtite hitch. This is by far the best 2" drop receiver--I bought four for comparison. Unlike the Roadmaster equivalent, powder coat is clearly thicker and shinier. Unlike the Meyer equivalent, the tube is hollow yet has a higher tongue rating. Material and welds seem slightly thicker than Roadmaster--again consistent with the Curt's epic 750lbs tongue weight rating. Unlike the Kuat receiver this has no built-in nut and one hole (I've drilled a second, 1.375" in from the current for a deeper insertion.) Note that the Kuat receiver had 5/8 threaded fine whereas paclock pin is 5/8-11 (coarse). I specifically looked for a hollow tube drop receiver so I could add my own 5/8"-11 nut for the paclock threaded pin. When it comes to hitch accessories, I'm only buying Curt from now on. All the rest is made-in-china cheap grade (and yet similarly priced....).

I purchased a 2020 Hyundai Palisade and had a hitch installed with every intention of using it to tow a pop-up camper. By the time I finally got around to trying that I realized I had no idea what I was doing. Everything was too low and a normal rise hitch was really close to the back of the car. I also use a sway bar and finding a 2” rise + sway hitch point that also extends far enough away from the vehicle to also use my Curt Bluetooth brake controller doesn’t exist. That’s where this adapter was a lifesaver. The extension was great and the rise is perfect. Problem solved. It’s a few moving parts but I use a couple of anti rattle hitch pins and the whole mechanism is solid. One thing to note if you are planning on using anti-rattle hitch pins the interior shaft portion of this that slides into the car receiver is thicker than a standard 2” hitch and a couple of anti-rattle mechanisms didn’t fit.

This worked great for a Toyota Crown Signia with a Toyota OEM hitch receiver, which is too low and quite recessed under the back bumper. I am using this for a bike rack, but the labeling seems to indicate that it can also be used for towing. The stated tongue weight is 750 lbs, which seems really high for a hitch extender.

Needed to change from a 4" to 2" drop hitch when I changed my motorhome from class C sprinter to a Fleetwood Class A DP. You wouln't think there would be such a height change but the sprinter hitch was 2" higher than the Class A hitch and the 4" drop I had before set my ford focus tow bar pointing downward toward the Class A drop hitch. The 2" drop was absolutely level , and with the 4" I actually had the hitch bottom hit the pavement when there was a dip at the street exit in my neighborhood. The Curt drop hitch actually was rated at 7500 LBs and the Roadmaster 4" drop hitch was only 6000 lb rated. The curt was about 45$ and the other was 125$.

Perfect for my Buick made it where my Rocky Mounts bike rack didn't interfere with the back hatch when it opened and closed automatically. i'm really happy with this product, I combined it with a rhino antirattle.

It fit perfect

Good quality

I purchased this as a drop hitch adaptor to tow my truck with my motorhome. I paid a little more for the name brand Curt hitch adaptor, but I had an off brand that I purchased on Amazon because it was cheaper that failed. DON'T DO IT, PAY THE MONEY! The cheaper one actually broke at a weld while pulling the truck. Thank God the safety cables did their job. The welds on this adaptor look much beefier and the finish looks very durable.

ヒッチが穴が2インチcart製でない場合。グラインダー等で加工が必要な場合があります。 また、ヒッチ内部が中空でない場合もカットが必要です。 製品は非常に頑丈で信頼があります。

Good product, well made and solid. Used to lower my bike rack so that I can open my tailgate Kuat NV 2.0 on a F150

Fit and works good

This fits great into the 2.5” receiver on my 2014 Ram 2500. I did put one layer of electrical tap on the left and right side to make it even more snug, as I am attaching a rear-mounted snow plow to it and I want as little movement as possible, but for a normal trailer the fit is perfectly good. Welds are good, feels solid and it’s been holding up just fine. Great product!

Does the job but multiple holes would have been better to accommodate multiples extensions dimensions! But look sturdy !