AOBEN Paint Sprayer, 750W Hvlp Spray Gun, Electric Paint Gun with 4 Nozzles, 1000ml Container for Home and Outdoors, Painting Projects. (Blue)

I've use hand held sprayers in the past that pumped the paint. I really like this gun. It's pretty easy to use and cleans up easy. You can soak the parts in a mild solution of soap and water. I spayed some Rustoleum on my car and soaked the parts in water and a small amount of Awesome, which I've always used for cleaning Latex. I did 2 coats thinning the second coat an additional amount. The second coat went on incredibly fast with a wider pattern. I'll probably use this gun for wood refinishing and some high gloss latex. By going with a thick to thin paint and manipulating the air pressure I can tell it will adjust to a really good coating after some experimenting. I've used compressors and spray guns in the past, but at 62 I want fun and easy. I paid $2500 for the car with 150,000 mi on it, so I knew it wasn't going to be a top notch paint job, but I covered the cancer on top. My advise is to try this gun it's pretty cool and will spray. Great for small jobs, but knowing me I would spray a long fence with it. The turbo will put out a mist with a little over spray. Start with the Air Screw at half to full so it works. I saw a lot of reviews that said the gun wouldn't even spray. Thin by 15% and if that's not working thin a little more.

I bought this in January because I found the right price and knew I would need it to paint my garage later in the year. Because of weather related issues and time I finally got to use it. Works great. I was a little worried about coverage, because I was painting white on white and it was hard to see at first, but when it dried you sure could tell the difference. I am going with another coat because first was primer. Was very easy to clean in a bucket of water. One thing to note though, it is a bit heavy when filled but you get used to the weight. Did save me time.

I started doing DIY furniture 2 years ago and I hate painting now. We bought a huge almost $700 paint sprayer that I refuse to pull out to paint smaller projects. I didn't want to spend a lot on a smaller paint sprayer and decided on this one. Things that made this not turn out to be a disaster: * I read the manual from front to back, familiarized myself with all the parts and practiced taking it apart before using it. * I thinned the paint based on the paint manufacturer's guidelines. (The manufacturer's guidance said 1/2 pint of water per gallon of paint, so I calculated how much water I should use given that I was mixing the paint with water in 16 ounce batches. I used two separate measuring cups for each and used distilled water for the thinning since extra stuff is added to our tap water to keep it from freezing in the pipes.) * I strained the paint using the provided paint strainers. * I made sure the tube was facing the front since I spraying downward. * I turned the material flow down so I didn't have too much paint coming out at a time. * I turned the little ears horizontal since I was spraying from left to right. * I tested on some cardboard before I started to ensure the paint was coming out at a satisfactory consistency, then went to my furniture. * I maintained a consistent 6 to 8 inches away from the furniture. * I started spraying before my piece of furniture and ended just after it. * I overlapped the new section with the previously sprayed section. The sprayer was easy to take apart for cleaning. Overall I'm very satisfied with this little sprayer.

Because I am tenacious I spent two days trying to work around the numerous issues I encountered with this item. I absolutely hate myself for ignoring some of the reviews on here and purchasing anyway. That's why I'm writing this review, so that it helps someone else make an informed choice. It's terrible. First Red Flag for me should have been the reviews on here. Then the fact that there are hardly any video reviews for reference. Not on all of the social media sites I use. This brands online presence is almost none, so if you find yourself like I did soooo many times, trying to find some tutorials or POV resolutions for these issues from other people...good luck! It took me two days to paint one room and halfway through the second day I gave up. This thing spits...I troubleshoot according to manual, it sputters...manual. It splatters, it overheats, it clogs every few minutes. Before you ask! Yes I did the viscosity test and properly thinned my paint. It was useless. Now I'm left with wasted money, wasted time, a huge blister on my hand. Listen to be honest the money doesn't bother as much. It's very cheap. I don't believe this is a case of you get what you pay for. I think this thing is just not good. Buyer beware!

Solo para pintar muro es excelente

I had an old electric sprayer that was nothing but problems. So when I had 4 sets of louvered bifold doors to paint, I figured I would give this cheap one a try. I had very low expectations. And at less than $50 I figured even if it was a pain to use it would still be better than using a brush. There is no worse thing to paint than this type of door. So many parts to get at, and so time consuming. Well to my surprise this sprayer is awesome! I followed the directions to a T. Used a very thick latex paint thinned with water 1:1. Also used the red tip. This sprayer layed the paint down smooth & even. I was shocked! There was overspray but I painted outside on saw horses. I painted 3 coats on 3 sets of doors ,both sides, in less than 4 hours at 65 degrees. 3 light coats dried quickly, so recoating could be done without doing complete sprayer cleaning. Only flushed with water between coats. When I was finished clean-up was easy. The part of the sprayer containing the trigger, nozzle & container all disconnect from the motor portion. Used the provided cleaning brush & a medium bristle scrub brush in a sink with hot soapy water. Took less than 5 min to clean everything. The motor portion has over spray on it, but nothing effecting function. I was prepared to spend twice this sprayer's price & am glad I opted for this one. Well worth every cent.

I was skeptical and hesitant to use this electric turbine hvlp paint sprayer to spray automobile paint but given my circumstances and lack of traditional pneumatic spray gun and high capacity air compressor (30+ gallon) I really had no other solution.... Im so glad I did. I initially used a big piece of cardboard to spray for practice with the use of the gun, making several spray adjustments while simultaneously practicing my travel speed and technique. After just a moments I decided to press my luck. I had never previously painted a car and everything I taught myself come from watching videos online.... Not to toot my own horn but BEEP, BEEP. I knocked it out of the park. Thanks to the great atomization of the turbine coupled with the 1.5mm tip, the paint laid out super flat and surprised the heck out of me. After the initial success spraying paint I followed up with a 2 part clear coat . This gun really did a great job getting that clear slicked in.. ive got a ton of compliments on the paint job... everyone's shocked when I tell them, I did it!. The sprayer is easy to use, considering I'm a newbie, and it's a breeze to clean... I couldn't be happier . If I could give this thing 10 stars , I'd says it's worth 15... Now I thinking about painting my house lol

I wasn't expecting high quality at this price point but pieces fit well and the unit functions as it should. It has a nice spray pattern and smooth operation. I had an older brand name product that was very hard to get the spray pattern right. This one is simple and functional. I would buy it again.