2.5" Front Leveling Kit

Not easy to install, but the leveling kit itself seems pretty solid. Leveled a 2020 Chevy Custom with 20" wheels. After viewing some videos online I first tried the method where you leave the tire on and try to remove and manipulate the strut from the bottom, but this would not work. Then tried the method jacking the truck up, removing the tire, and removing the nuts on the spindle, sway bar, and bottom nuts on the struts and this gave me enough drop to get the leveling kit on (I did not remove or loosen the nuts on top of the struts). Most of the videos show removal of the tire rod end but I did not have to do this. For this method you will need two jacks, one for the truck and one underneath the wheel assembly when trying to reinstall the spindle nut. Not sure what super mechanic did this in 20 min. The first tire was the learning curve and with power tools like an impact wrench took over an hour, the second about 30 minutes.

Easy to install. Looks like they upgraded the bolts to grade 8… I was concerned about that after reading a couple of reviews. Also, a prior review stated you do not need an alignment, but after putting the 2 inch spacers on it the toe was out. I would definitely recommend an alignment afterwards to help save your tires from a regular wear. I posted a before and after picture for reference on my 2020 Tahoe, RST. After measuring post install, I could've gone for a 2 1/2 inch to make it completely level. It's still just a hair raked But I didn't wanna go too much because this is my wife's daily driver. She is happy and I didn't lose much ride quality.

Worked well with my truck. Has held up ok the northern climate. Would recommend.

I decided to go with the lower strut spacer rather than top and choose these due to the positive reviews. They are as described and installed as expected. Installation took a out 4 hours. You really need to follow the instructions and remove the hub in order to shift the axel to get the bolt to drop in rather than going up from the bottom. The bolt will hit the axel if you go up. Do your research before considering I'm making any decisions to modify your truck. On a scale of 1-5, this would be a 4 if you don't have the right tools. An impact gun and impact wrench were very helpful.

Awesome product but the bolts are weak. It makes a big difference to the vehicles appearance but as I was installing them the bolt started to strip so I bought some Grade 8 bolts and nuts to replace the ones it came with. Overall still worth it compared to spending more on essentially the same thing with a brand name. I would definitely recommend them but get some better bolts to install them.

Bueno

Good

You can't beat this kit for the price. It leveled my 2022 Chevy 1500 3.0 Duramax perfectly. How to install. 1-Remove all sensor and brake lines form the spindle. 2- Remove upper control arm from spindle. 3- Remove tie rod end from spindle. 4- Remove sway-bar end link. 5- Remove lower strut bolts. Install spacer with the nut facing down. That's all you need to do. Nothing else! No alignment needed you did not remove anything to cause it to change. But feel free to have it checked. Took me about 45 min. per side.