Carhartt Nylon Duck Front Seat Cover, Black, 500 Denier

I bought these as a trial run test. As i have these already in my ‘20 Civic LX I wanted cost effective seat covers for my truck. I am not dropping close to four hundred dollars on front row seat covers. As these can be pieced in separately that was also attractive to me. I am bery pleased with them in my car. I installed them in my truck, and also am very pleased with the fit. On a side note, the rear pull straps on this model don't have a way to attach to the foam bar that slides in between the upright and the seat bottom. As these aren’t true buckets the back of the seat is one piece of fabric. So I hooked the rear straps to the bottom frame of the seat and it still fits well. As you can see in the photo where the black stretchy fabric and the elastic rope sits on the outside of the plastic seat housing where it’s closest to the floor. Way more economical in my opinion, and a good price point. The durability for the past four years in my Honda has been exceptional. I will purchase a second cover for the passenger seat shortly. I generally keep the fold down seat which turns into a center council down so I don’t need a cover for that just yet. Bery pleased. You do have to take your time installing these as it states in the description that these seams will rip apart for airbag deployment so you cannot overstretch, but I did not encounter any problems during installation

I use these for my patrol vehicle and they work well. They aren’t perfect but that’s what you get with Universal fit. The product is like all of Carhartt’s products: durable, effective, and as advertised.

MAJOR FAIL. Purchased new Dec 2023. Side seam stitch broke during installation due to inappropriate thin 'single stitch' poly thread used to join canvas to elastic material. Pieces of the poly thread are shown in the red circle in the photo. The triple stitch on the canvas is smart and effective but the single stitch poly thread on the side is the weak point of the whole item. I'm an expert in mechanical design and durability and I was fitting it on my truck seat when it failed. Had it not failed, I would have used permanent material glue (not cyanoacrylate) on the underside of the seams ON THE THREADS to prevent threads from breaking and decreasing thread pulls in the joined materials. This cover would have lasted longer than most, but this premature failure is inevitable simply from wear and tear due to poor manufacturing standards. I also got lucky with it failing on install, not dealing with it down the road after the fact. Ironically, I developed and used the permanent material glue trick in 2017 to save an old Carharrt coat I liked from further thread breaks and damage, which I also used to keep the frays from worsening. This same glue trick worked great on the coat to this day and recently on our treasured braided spiral rug. Also used it on my buttons from popping off. In my opinion, everything about the cover is good as retail can offer, but the failure I had puts this in the trash bin. And it wouldn't surprise me if the canvas was made here and the cover assembled in China. Save your money, use the trick... American Ingenuity (Dutch & German in NY)

I like the material and it is hard to go wrong with Carhartt. Covers went on fairly easily. Pretty good fit on my 2018 Tundra SR5 Crew Max front seats. Once you get it clipped and in place, looks good enough and it will protect the seats. Since it is universal, not a 100% fit, but good enough. Had to use another bungee for lower seat rear cords as too hard to try and clip them below just due to Toyota seat design. Had both headcovers in one box, strange as one should come with each and I thought one was missing, then two dropped out of the other box. Ha! Boxes are not sealed, so who knows. But, if you do not want to pay more for fitted covers, these should work OK for a Tundra or other full sized truck front seats. Rear cover did not fit, too small, but these were fine and I got them on in about 20 min.

I had gone through 4 sets of seat covers trying to find some that didn't look cheap and that had a great fit for my older rav4. I should have honestly bought this from the start instead of trying to find a cheaper option. Install did not take long, under 20 min. The material is not stretchy and there is not a lot of give, so I would recommend to take your time and try not to force it. I did rip a seam by rushing. My tip for the straps that go behind the seat is to wedge one between the seatbelt insert and that will allow you to adjust to the correct length of the other and buckle. I have had the seat covers for a few months and they are incredibly easy to clean. (Crumbs, dirt, ect). I am considering making them water proof as I haven't spilled a liquid but I feel like that would elevate the product to perfection. If you have an older Vehicle like myself and want something durable, looks great and higher quality I would recommend this product.

I installed this Carhartt seat cover in my 2009 Ford Taurus and I’m very impressed with the fit and quality. Fit: It slipped over the seat snugly without being a struggle. Once in place, it doesn’t slide around, which is something I’ve had issues with on cheaper covers. Material: The canvas feels thick and rugged, just like Carhartt workwear. It has a water-resistant finish that makes it easy to wipe clean — a big plus if you have kids, pets, or do a lot of outdoor work. Comfort: Even though it’s heavy-duty, it’s not stiff or uncomfortable to sit on. It adds a nice layer of protection without making the seat feel bulky. Style: The Carhartt brown looks sharp and gives my older car’s interior a fresh, rugged look. It matches perfectly if you already like Carhartt gear. Overall, this seat cover feels like it will last a long time. It’s definitely worth the investment if you want to protect your seats with something durable and practical. Would recommend for anyone who needs tough, reliable seat protection.

Got 2 years out of mine till it started to rip at the sides. Initial fit was snug enough (on a Honda CRV) certainly did its job preserving the seat. An added bonus the brown color doesn’t get hot in the summer. A little disappointed with the products lifespan.

Own a 2022 Prius, for a universal seat cover, it fits pretty well. It's not skin tight, but fits pretty well. One thing that I see as a great design, there is a piece that goes between the back potion and the seat potion of the car seat to keep the cover in place. A little bit of a struggle to get it to go where it needed to go, but needs to be that way. Don't give up on trying to do this step. Great quality like many of the Carhardtt products.

These are great. They look really good and have protected my seats no problem.

Passt auf die Mercedes w639 sitze ganz gut. Für das ordentlich festklemmen der Sitzfläche ist jedoch etwas geschick nötig. Das Material ist sehr widerstandsfähig, ob der Bezug waschbar ist werde ich ergänzen sobald ich es getestet habe.

カーハート特有のブラウンが車のカラーとマッチして気に入っています。 材質も強くて安心できます。

Lässt sich unkompliziert anbringen. Sieht super aus. Allerdings nicht der gewohnten Carharrt-Denim-Stoff, eher synthetisch.

Buena calidad y ajuste para mitsubishi montero io.