Silhouette America Silhouette Media-CLR-ADH Printable Clear Sticker Paper

I was able to print full color without any issues. Even photos looked respectable. The resolution of the images was quite good. I printed photos and black and white fonts. I tested ink after only 30 minutes and it was dry to the touch. After an hour I tried vigorously rubbing it with a white cloth and only a tiny amount of ink came off (I would guess the same amount that would come off any paper), but it didn't mess up the print. I printed with an HP Officejet Pro L7780. One reviewer mentioned baking the paper for 1 hour on 190F. I tried this and it did not dry the ink any better for me, but the paper curled up and the glue page started to separate from the printed page after only 30 minutes. In my limited experience, I would not recommend baking. I also found the adhesive to be very strong, but I only tested it on painted surfaces of wood. I could not imagine the adhesive coming off as it was hard to remove when I pulled it. As far as the clarity of the paper, it is quite clear, but as some reviewers have stated, it does take on the grain of whatever you put it on. In other words, if you put it on a piece of painted wood that is not absolutely smooth, it will take on tiny air bubbles and not adhere totally smooth, but this is being very nit picky. It does a good job. I would guess smooth glass would take the sticker best, but it looked great on wood too. Your can mash it down after you put the sticker on to reduce air bubbles. But please understand, these are not big air bubbles. I did not use any templates or special software to print. I just used MS Word, created the document I wanted, set the printer to "other transparency films" and printed on the "best quality" setting. If you don't have that exact paper setting, I would suggest any printer paper setting that says "transparency paper" of some sort. If you don't have a transparency paper setting, other reviewers printed on "matte paper" with good results. Overall, this product performed much better than I expected considering some of the negative reviews suggesting runny ink or low adhesion. As with any paper, performance is going to vary depending on your printer, type of ink and the surface you're trying to attach to.

This is the best clear sticker paper. It prints well. and cuts well. I also emboss it with embossing power and it holds up to the heat.

I made Christmas decorations out of cookie cutters this year and this cardstock worked perfectly for the backings. Was easy to make the ones I used with fabric, stuck the fabric on and cut out the shape of the cutter so easy. The others were beautifully covered in white glitter and with some extra thick glue stuck onto the back of the cutter with no ribbing from being wet with modpodge and glitter. Great buy, nice medium to heavy weight stock! Ordered twice.

I use this paper quite frequently to make stickers for my planner, but I have recently branched out due to a few issues, which I'll list below, but first: Pros: 1. Bright white! This paper is beautifully bright white so colors are incredibly vibrant when you print on it 2. Texture - the paper has a nice smooth, matte surface which is wonderful to write on 3. Adhesive - it's very sticky! You don't have to worry about this paper budging one bit. Cons: 1. Thickness - the sticker paper itself is very thick. While I do actually like how thick it is for the most part, my HP printer refuses to accept the sticker paper nearly 70% of the time. I've researched the issue and several printers will not accept thicker paper, so this could be an issue for many 2. Price - it's quite expensive for how few sheets you get, making it not terribly cost effective if you are printing several times a month Overall, this is a good starter sticker paper, but after a lot of research and experimentation I've found that OnlineLabels is much more cost effective and has many, many options to choose from for my purposes. However, I would HIGHLY recommend this paper for other projects - like labels, seals, etc

After reading through mixed reviews about feeding this paper through a laser printer I decided to buy and try anyways. It worked flawlessly with the exception that - although it takes effort, I was able to scratch off the ink but I will seal the labels with something basic (krylon clear coat spray, probably) and these'll be perfection. I used a Ricoh C4503 model laser printer and set my paper to "thick" and to pull from the bypass tray. These turned out exactly like I hoped, color-wise, and were easy to peel and stick. I was able to remove the label after adhering it to the glass bottle and thankfully it didn't leave any residue but also didn't give me pause to worry about the integrity of the glue (the seal I plan on doing might serve double duty to ensure edges can't be accidentally lifted). ETA: Krylon sealer did not help; with some effort, I'm still able to scratch off the design. Oh well. Thankfully I don't suspect these labels will be put into potentially scratchy situations so I'm keeping the review at 5 stars, especially since I didn't technically use/print them per directions.

I purchased a variety of Silhouette Printable sticker papers here on Amazon. You can't beat Amazon's price for this product. The adhesive paper is thick and made well. I've used this to make stickers for scrapbooking, stationary, cards, and also made planner stickers. The quality of the paper is great. I've been using them with my Cameo cutter and other tools, and it's worked well every time. My only advice for those with die cutting machines, is that you don't follow the suggested blade setting. I use it on a low setting like 1 on my Cameo, and it cuts fine. Anything higher tends to cut right through the paper which isn't great if you're trying to create sticker sheets. I think the suggested setting is fine if you're planning to make individual stickers.

So, I really do like the quality of the brushed metallic look. HOWEVER, there is no mention in the description of how much waste there is to accommodate the "registration marks" that pair this paper with their proprietary printers. I FULLY EXPECTED that the entire 8.5x11" surface would be printable. This is absolutely NOT the case. Also, my HP B&W laser printer has great difficulty getting toner to stick to this paper, regardless of what print speed or material I program it for. Hence 3 stars.

Bought to make our address stickers for our wedding invites! Worked amazing! Less work for handwriting that’s for sure!

Bueno

Vraiment pas adapté : la feuille est trop petite pour imprimer tout les repères du print ans cut, les découpes ne sont pas propre et l'adhésif est très léger. Au vu du prix, très déçue

really clear and easy print on and cut :) BIG THUMBS UP

OMG!! The stickers came out amazing , just like the photos.. Very happy with this purchase .. Buying again!!

Have used them to put up a notice on a glass pane of our office and it is Brilliant and it was very easy to use with our existing office printer. Some have noted that the ink can smudge - yes it can, that is the ink from the printer and the fact that you have touched it! But I would say best thing for that if you intend to use it for something that has to be handled or in a spot that is exposed to water/rain (outside of a glass pane) - print one, stick it on your glass pane/object and then simply stick another clear piece over the top - ta da! Water resistant and just as secure. I can see it would work best for flat surfaces as the plastic has a certain thickness that may not lend itself to bending. But was perfect for what I wanted it for.