airgoo Addressable RGB PC LED Strip, AG-NEON-LS1 Diffused Silicon Rubber Tube Neon Strip, for 5V 3-pin argb Header or AG-DRGB16 SignalRGB Controller(Not Included), Come with Magnetic Brackets

These RGB addressable LED strips are fantastic! The colors are vibrant and easy to customize, allowing for a wide range of lighting effects. Installation was straightforward, and the adhesive backing sticks well to different surfaces. The lighting is bright and smooth, perfect for enhancing the look of any room or setup. The ability to control individual LEDs adds a lot of creative possibilities. Overall, a high-quality product that delivers great value and excellent performance.

Product is good shame there isn't more vertical clips as only 4 horizontal 4 vertical and 4 curved , saying that it worked on a argb controller and 10 port extender hub would recommend, works well with signal RGB. Would say to make your case more better it can be bent and curved to shape with the soft rubber underneath the LEDs Lack of clips , maybe include more horizontal and vertical clips 2 of each would be good

I generally don't like RGB-heavy computer builds, as I find them quite irritating after the 1000th spin of the rainbow. However, I recently built a PC and the GPU (MSI 6950XT Gaming X Trio) has a diffused-looking LED strip towards the side panel. I thought it looks quite smooth and it could be configured to look nice and not like the ADHD dream. The issue was that the tinted tempered glass of the case resulted in most of the insides being too dark to be noticed, which for me took away from the tempered glass sidepanel feeling. Therefore, I wanted some non-intrusive LEDs to add some light to the case. I found that these strips looked the closest to the GPU's LED, and they were also compatible with MSI's Mystic Light. Turns out, they look almost identical, which is great! So far I have only been using one strip, but considering adding the second one. The build quality is decent (although the rubber finish around the LED strip could had gone through better QA). I find the price to be a bit high for a set that provides only one connector for ARGB (4pin connector with the 3rd pin missing), meaning that I can only connect both strips if I daisy chain them, or use the Y-connector, but I cannot connect the two strips independently to the motherboard, which is a bit annoying. Other than this issue, I would recommend this product. I will update my review in the future if any issues occur, or if I add the 2nd strip and feel like uploading a photo of the result.

Writing this review in hopes it may help other people that encounter this same issue as I did. Upon receiving these, the cable simply would NOT plug into the header on my motherboard. I tried multiple headers, pressing harder, googling it, and after pulling my hair out concluded either it was the wrong cable or faulty one. Ordered a competing brand and their cable also didn't fit...until it did. Turned my PC on to find the LED strip from that brand didn't work and decided to return both. In a last ditch attempt before returning this, I attempted to plug it in one last time, and to my absolute surprise and confusion, the cable suddenly went snug into the header and lights came on! My PC looks lovely now! An additional piece of advice with these: if you are using MysticLight from MSI with this strip and can't get the color you want using the color wheel, USE THE RGB NUMERICAL VALUES INSTEAD! I wanted a nice orange glow and the color wheel would go from an intense red to a strange dull pink when attempting to click orange on the color wheel selector. Using the numerical values to fine tune the color got me exactly what I wanted. Despite a bumpy start, these now are running like clockwork and run flawlessly. A happy ending!

Packaging was good, had a lot of extension cables for daisy chaining etc. Very easy to install as there are a lot of magnetic holders and 3m double sided stickers meaning it van be placed anywhere. Very bright and if you have the right headers it can be shown pretty much any range of colours. You get 2x40cm strips and accessories. Only one header is needed for both.

The strips look good. They are bright but diffuse lighting which is exactly what I wanted and expected. They are nicely flexible. The magnetic brackets are a bit tight to get to the strips - but that means they will hold them well, even upside-down. Good variety of bracket shapes mean you can fit them wherever reasonably easily. Worked perfectly for me. The strips are thicker than I expected - there is a roughly 1cm thick layer on the back of the strip which the brackets attatch to, meaning they sit proud of the surface. This might affect where you put them. The cables that come with them do not match the description. It is not made clear that these strips have to be daisy-chained - they do not supply connectors to connect them individually to separate ARGB ports.

Nice vibrant colours, good frosted/diffused look and excellent mounting system using magnets.

I bought this to add some light to the bottom of my PC case. I only needed one strip so I have a spare if required in the future. It was very easy to connect the light strip to one of the 3 pin ARGB headers on my Asus motherboard and control the lighting effects with the Asus Armoury Crate software. It gives off a beautiful RGB hue that matches the rest of my PC and the magnetic brackets securely attach it to the case. I am very pleased with this purchase.👍

I found these strips via Youtube when looking for some strips to diffuse in the bottom portion of my PC case. I found these ones, which actually looked pretty cool as they already came diffused, so I decided to purchase. The box came in good quality, and everything inside was packaged well. Out of the box, they were the perfect length for the bottom of my case, and the side as the box came with two strips. At first the install was confusing because I wasn't sure what cables go where. Both ends of the strips had 3 pin fan connectors (or what looked like them) and I was confused, but once you play around a little bit you can figure it out pretty easily. From there I got them daisy chained to each other, and then daisy chained to the rest of my system fans as I am only using the one ARGB header available on my motherboard. The magnets are actually pretty strong, and if you have a black case they will be hidden pretty well. I do wish however that there were more magnets as I had to take some off my bottom strip to make the lightning shape of the second strip. They started working immediately as soon as they were plugged in and I was extremely happy with the brightness & quality of the lighting. The colors are extremely accurate to what I want them to be. With these patterns can be limitless as each LED is addressable, however, you do need an *actual* RGB controller to be able to properly individually address them (not an ARGB splitter). I do not have one but I liked the quality of this enough to purchase Airgoo's ARGB controller. Now I only got these a couple days ago, so I cannot speak on the durability or the lifespan yet, but if any issues were to arise from them, I would edit my review. I also want to note that the fan sound heard in the video I attached is not from my PC but rather a standing fan, the strips are silent.

Marche correctement. Compatible msi lighting. Nikel

Perfect product

La verdad estoy muy satisfecho, estoy controlando las tiras mediante Asus Aura y todo funciona perfecto, tiene buena representación de colores, buen brillo y la sujeción vía imán es buena, totalmente recomendadas, las supli por una tira convencional rgb y ahora se luce mucho mejor!

It is working fine but the unit somewhat old, box open and not in good condition.