Jucoan 380 PCS M3 Nylon Standoff Kit, Male Female Nylon Hex Spacer Screws and Nuts Assortment Kit, Threaded Pillar Spacers Standoffs and Screws for Circuit Board PCB Motherboard Mounting

I used this standoff kit during a recent SFF PC build and it worked perfectly. I needed 20mm male to female standoffs to mount my GPU higher in the case and the included 20mm M2F piece was perfect. This is one of those kits that's nice to have when you need it and probably something every PC builder should have in their toolkit.

This kit includes a huge assortment of nylon standoffs, screws, and nuts, all at a great price. They’re durable and work well, just don’t over-tighten or the threads can strip. Perfect for DIY electronics and small projects — plenty of sizes to choose from.

Works well, even though I needed smaller length screws, they are nylon so I was able to cut the longer ones to the required size. Not real strong

I found the Jucoan 380PCS M3 Male Female Nylon Hex Spacer Standoffs Screws Nuts Assortment Kit to be exactly as described online. This kit provides a good assortment of lengths and options (m/f, f/f, and end screws and nuts). This set of standoffs works well for me and I would expect for anyone who likes to use nylon material standoffs. As this was my first non-brass set, I found that I do not care for the light weight of the nylon standoffs. I typically am working to make my builds heavier (even with brass standoffs) so the single board computer or microcontroller does not go sliding across my workspace or doing flips every time I plug in a stiff cable. Thus, I do recommend these for anyone who needs a good set of M3 (what I purchased) nylon standoffs. They also work fine when I am able to use one of my 1/16 inch stainless steel project bases, as nylon vs. brass makes no difference at that point. However, I have not made that many bases (yet). Cheers.

A LESSON LEARNED....METAL SCREWS ARE NOT THE ANSWER FOR A GOOD MOTHERBOARD INSTALLATION. THESE CLEARED UP A SHORTING PROBLEM AND WERE SOLID TO INSTALL. THE BOARD IS GROUNDED THROUGH THE POWER SUPPLY AND HEAT TRANSFER IS NOT A PROBLEM SOLVED BY METAL SCREWS. USE FANS IF YOU NEED COOLING. BE AWARE THERE ARE TWO TYPES OF SCREWS FOR MOST MB...THIS SIZE AND 6/32.....CHECK TO BE SURE WHAT YOU HAVE.

I have a Gigabyte RTX 4090. The mounting bracket for the GPU has worked great for a year or so, but I recently did some more modding to my PC and inadvertently snapped one of the standoff mounting screws for the anti-sag bracket. The standoff style mounting screws for this video card are a little weird. Thankfully the standoff screws in this kit worked great and I was able to replace the broken standoff with one from this kit. It's working perfectly.

Great

I don't know why I thought these were metal, but they're not they're plastic...not very durable..don't build anything for strength with these..

Nothing to dislike except that some of the nuts were a little tight. Versatile for prototyping or one-off DIY projects. More specific ordering would be necessary for a production run. The nylon stan-offs can be made to adhere to the inside of a waterproof casing using epoxy to avoid penetration.

Came quickly and in nice packaging. These fit as described and do a great job when needing a non-metallic screw/nut to affix something - lots of extras for various jobs provided as well! Recommended.

I use this hardware for stacking electronic circuit boards. They are of high quality and all parts fit together precisely. The non-conductive nylon makes them perfect for avoiding inadvertent short circuits. I recommend this product for any hobbyist that requires non-conductive mounting hardware.

Purchased for low voltage electrical project board to isolate two different voltage powered circuits. Wide variety of options that are standard sized to fit brass standoffs and work great.

Great product and the quality was good. The price was just right. would purchase from the seller again