Loctite PL Premium Polyurethane Construction Adhesive 10-Ounce Cartridge (1390595)

My application was to bond a plastic access panel to drywall and it worked perfectly - exactly as advertised. Pop the cartridge into a caulking gun and it's ready for use. One word of caution would be to apply first to the surface you are trying to bond (in my case the plastic access panel) and let it set up for about 20 min before applying to the surface as the directions indicate. This way it almost immediately bonds and holds in place as it will dry quickly enough so the item will not move around. It takes 24 hours to fully dry, but that time is necessary in case you are trying to do something that would disturb the item before set-up is complete. It's fairly easy to use but can be a bit messy if you're not careful and mostly because at least in my case the glue kept coming out of nozzle to quickly but that was probably more an issue with the caulking gun. Also wear gloves so you don't get it on your fingers, which I failed to do - it will clean off the hands, but not easily. The only other issue is it is pretty much a one-use product, since it will dry solidly in the nozzle blocking future use unless I figure a way to clear the blockage. If you're looking for a bonding glue that will work on virtually anything, that is easy to use and a good value, this may be what you've been looking for.

Good

Brilliant stuff

I put my rubber garage door floor seal over epoxy surface, work excellently

Worked great. Doesn’t dry fast so I could adjust and clean up without rushing. I could even reuse it after opening. I even was able to cut open the tube after 2 weeks to use remnants for an emergency repair. Wasn’t dry even after the tube was cut open (two times for different projects). Resealed by inserting a screw and wrapping with plastic.