Thermaltake Gravity i2 95W Intel LGA 1156/1155/1150/1151 92mm CPU Cooler CLP0556-D

Tengo este disipador desde hace unas semanas montado en un i7-2600, las temperaturas comparadas con el de stock realmente no han mejorado mucho, siguen siendo las mismas cuando esta en reposo pero cuando le meto un poco de estres tarda mas en llegar a su punto mas caliente. Aqui el detalle por el que le doy las 5 estrellas es por la cuestion del sonido, el disipador de stock hacia mucho ruido cuando tenia una alta carga de trabajo y este thermaltake no hace absolutamente nada de ruido manteniendo la misma eficiencia, un punto a considerar si quieres tu setup lo mas silencioso posible, ademas de el costo (Que realmente es muy bueno) y ni hablar de los materiales y acabado, es elegante, bueno y eficiente, no le hace falta el rgb para verse bien. El unico pero que le puedes poner es que no es PWM, pero con los resultados que te da, no te importara mucho. Si tu procesador tiene un TDP menor a 95w, es una opcion que debes considerar, creo yo que es el mejor costo-beneficio.

If you need a great, basic cooler for your Intel chip that’s slightly better than the default cooler, look no further! Make sure you check to ensure your motherboard/processor are < 95W (so most of the relevant intel chips) and are one of the compatible sockets (again, most recent sockets) - once you do that, this CPU cooler is easy to install (install the backplate then screw in the 4 screws and plug in the fan header. Done. Couple of quick notes - first, this does use a backplate (unlike the push-pin based default included cooler) which means you’ll need to access the back of your motherboard. Not an issue if you’re installing a new motherboard in a new case, but if you’re replacing an existing cooler in a complete build, you may have to remove the motherboard if you don’t have access to the back of the board in the case. I actually like this as the install is much more secure that the push pins - and you know you have the right tension - but it is something to be aware of. Second, this does have pre-applied thermal paste which makes it easy to use. The thermal paste seems to be of reasonable quality and is well applied - I used it as is for the initial install, but ended up moving the chip to new board and having to use my own. Expected and no issues - but if you’re looking for a bit more performance, you might want to think about changing the paste. If you’re running stock clocks and not running at max all the time, the included paste should be just fine. Third and final consideration - this is not a cooler for overclockers. It can probably handle a minimal overclock - but it’s really designed to be cool and reasonably quiet at stock settings, voltages and the like and it does well at that. With those considerations out of the way, if you have a compatible chip and don’t mind the above caveats, this is a great cooler and highly recommend!

I bought this Thermaltake Gravity heatsink fan for my CPU long ago for my LGA 1155 motherboard, but recently needed to buy another one for my other LGA 1155 motherboard. The Thermaltake heatsink fan works good. Definitely quiet. It replaces my other heatsink fan(Intel) that uses those plastic knobs that requires turning counter-clockwise followed by forcibly pulling up those knobs to remove the heatsink fan from the motherboard. Well, in my case, those knobs(or whatever they're called) got stuck, likely due to wear-and-tear and age, and I almost physically broke my motherboard in the process of removing that Intel heatsink fan. With this Thermaltake heatsink fan, I don't have to worry about using any physical pulling force because it uses plain screws to keep the heatsink fan in place on the motherboard. The only negative about this heatsink fan is that you need access to the other side of the motherboard to secure it in place using the plate it comes with for reinforcing the heatsink fan to the motherboard. I prefer to use a screwdriver to secure and to unsecure the heatsink fan, so this product is a good fit for my needs. I have a second Thermaltake Gravity arriving soon to replace a broken heatsink fan(also Intel) on my other LGA 1155 motherboard, which broke because it got so stuck(despite properly turning counter-clockwise and pulling up each knob) that I had to physically to rip it off my motherboard with so much force that the plastic knobs shattered, thus needing to replace it. I have expectations that the Thermaltake Gravity(both the one I'm currently using and the one that is arriving soon) will last much longer than my previous heatsink fan(Intel), and I don't think I will be disappointed.

純正のCPU冷却ファンを使っていましたが、7年間メンテナンスしていなかったために、手ごろなサードパーティー性の本製品を購入しました。交換はソケットナンバーを間違えないようにセレクトし簡単にできました。しかし、発送時についたらしい箱の傷が気になり取付に取り掛かったところで、ソケットピン4本のうち1本が曲がっていたのでペンチで修正して使いました。冷却性能はファンの音がうるさい分効果がありそうですが、間違いなく音は大きくなったので、純正の音の大きさを知っている方、または静かなファンを求めている方にはお勧めできません。

Good.