UV Resin, 200g Crystal Clear Hard Resin for Jewelry Making

Better than Bondic because: Much stronger than bondic. It dries clear. Bondic is like an amber crappy color. This creates a much stronger, harder to break seal. It's cheaper It comes with WAY MORE resin. Like WAYYYYY more if you've used bondic you know what a pain their applicators can be. Bondic applicators gets difficult to apply as they start to empty. But the precise tip is needed sometimes) So i even filled up my empty-ish bondic applicators. (I mixed the two because who cares? I sure don't but if there's any issues, I'll come back and update this... actually i probably won't. I have no doubt it'll work fine. They're both uv resin) The tip of this product allows for much more coverage (be cautious of over applying. Apply a little, cure it quickly, then apply another layer, cure it, on so on) Otherwise this stuff will come pouring out. Have your UV light ready (with bondic too! Any uv resin) just have it ready. And make sure you don't accidentally shine your UV light on the applicator as you attempt to cure each layer. (I did this with bondic at least 10 times. I would apply some and aim the uv light, then attempt to apply again before i moved the light, or accidentally just held the light on the exposed tip. It sucks.) I use this for fixing things, not making jewlry. Sometimes if i have to glue something that is difficult to hold until the glue dries (just as an example, an arm on a vinyl figure.) I'll cover the surfaces (that I'm going to bond) with the glue, and then add uv resin around the edges (of course it ends up mixing with the glue but so far that has not caused an issue) This way i can cure the resin and set the item down as the glue cures. (I'm impatient and there's nothing worse than trying to hold two tiny surfaces together that keeps slipping. It's maddening) This method makes works every time so far. It's awesome Then you can peel or pick at any resin that globbed up from the surfaces if needed without disturbing the glue bond (hopefully. Be careful) I'm very pleasantly surprised with this product. It's interesting that bondic used an inferior, weaker bonding resin, with an ugly color, and a crappy applicator... the creator said he had the idea because he's a dentist and uses uv resin for teeth. 🙄 uv resin has been around for years and I'm pretty sure he wasn't the first person to use it to fix something THIS IS NOT A GLUE. YOU CANNOT GLUE WITH THIS. THIS. IS. NOT. A. GLUE... for crying out loud people. And if you need to bridge a gap between the two surfaces, make a quick tiny "string" from one side to the other, cure it fast before the "string" collapses then add another "string". Cure and then you should have a foundation you can use to hold up more resin. Just build up tiny layers. And extend the uv resin further past the two surfaces. The bond works better with more surface to grab. If you use this as a glue, then you deserve what will happen. Simply use this to hold the surfaces that have glue. It's that simple No need for pictures. It's a resin.

The JDiction UV Resin is an excellent choice for crafters looking for a thick, crystal-clear resin for doming, sealing, and coating projects. Its high-viscosity formula flows slowly for precise application, cures to a hard, glossy finish, and resists yellowing over time. Easy to use with minimal odor, this resin is perfect for jewelry making, DIY crafts, and detailed resin art projects.

I use UV resin in many resin projects. This UV resin is great! Seals well. Consistency is perfect. No leakage. Hardens well under a UV lamp. Nice clear results in my project. No yellowing over time so far as can be when using UV resin I recommend this UV resin.

JDiction UV Resin is easy to use, has almost no smell, dries clear, is economical and helps me produce my basket bottoms. The brochure included in every box is easy to read and informative.My first picture shows an example of one of my creations that will be used in basket weaving. The base is finished by me, resined and ready for the creation of a lovely basket. The second picture features one of my bases, representing the state of Michigan, that has been made into a basket. I designed and created both the basket and the base.

Arrived as two (2) bottles with covers and pour spouts. Although the bottles look small, they are able to go a long distance for a good number of small projects. Personally, I used them to cover NFC tags onto promotional goods for work. Resin pours smooth and crystal clear but had lots of fine bubbles. Because I had an NFC tag under the resin, personally chose not to expose to flame to remove and the end product still looked of good quality. My only reason for the 4 stars is that it took exceptionally long to cure. The instructions said it may be sticky and to use ice water; that method did not work for me at all and I ended up with a few finger printed products. The best method was a large lamp that I could leave items under for a longer period of time. That resulted in absolutely no sticky residue. Would recommend for first time resin products, small projects or specific larger projects that have a means of curing.

Really high quality UV resin, no stickiness if you cure it correctly. It's very clear, hard and high gloss once cured, which works perfectly for coating polymer clay charms. For me it cures in about 2 minutes, but often with the first cure there is a bit of oxygen inhibition so I cure for another 2 minutes in a clear plastic cup of water. the bottles are full, and it seems to be of good value for the price.

This is my favorite UV resin. It cures quickly. It has a beautiful shine and it’s easy to work with. I have never had issues with it not curing or remaining sticky. The price is also great as you get 3 bottles for $20 which last me quite a while as you don’t need much per piece. Been using this resin since I started making earrings over 3 years ago.

Very good product and great price. JDiction is the best resin I have tried.

This resin is very nice. It’s reasonably thick so it’s nice for doming but it also pours and flows well into complex silicon molds with not much encouragement. I’ve tinted it with resin pigment and mica powder (too much mica will make the curing time longer but it does eventually cure) and am very happy with the results. It only takes a few minutes under the uv lamp to get a nice clear glossy finish that is very hard and durable, and seems to have very minimal shrinkage. Also fairly inoffensive odour (I do wear a mask anyway) and no smell when cured. Can recommend! (Edit - I’ve now tried a few other resins and this is the only one that cures up completely in a few minutes without any residue or stickiness! Love it and will definitely buy more.

Bought these to seal some LED lighting cables from the elements, Having previously bought the low viscosity version, it kind of worked, but was so thin, that it simply ran away from where i wanted it, before i could hit it with the UV Torch, but this version is much thicker, and I could put a drop exactly where i wanted it, and it had barely moved by the time i set it with the UV Torch, and was able to create much neater joints, without random blobs that had set all over the place, making it look like a clump of popcorn had set at the junction. With a nice powerful torch, it sets in a matter of seconds, and is easier to use than Super Glue, as long as the resin is suitable for the surfaces you want to apply it to.

This resin is great ... the seller maybe not so much! I seem to be on the 20 day prime delivery program!! Very disappointing service!

Read that this brand is good and decided to give it a shot. Works well so far! Cures nicely and very glossy.

This is my first time using a UV resin, I have created a key chain. It cured hard and very clear using UV light. Just follow the instructions provided by the product. I got a bit sensitive of the fumes. So please wear a respirator. Don't know if it is my sensitivity or the product's fume. However the outcome is excellent and I do recommend it for Jewellery making. If u make a thick piece it might be a bit soft in the center when it is hot but not sticky. Just don't worry it will fully harden when it cools. I left my piece for 1 day for reassurance (because of my low experience) All in all I loved this product.