BETAZOOER Acrylic Reptile Terrarium Breeding Tank Enclosure 11.4"x7.7"x5.9"

Pros: Excellent value. Kind of fun to put together- clever tabs/rubber band construction. Feeding hole on lid is nice- we put our water dishes under it and don’t have to lift the lid to fill them now. Hygrometer is a nice touch (pro tip you can buy these cheap little hygrometers by the dozen if you need to replace- usually about 80% of them are accurate). Has sliding tabs on lid to keep it closed- very helpful for gentle escape artists like T’s. Crystal clear and nice design. This is perfect for invertebrates like our tarantulas. Cons: the acrylic is fairly thin/bendy so if you’re housing anything that needs protection from pets outside their tank (like cats) this probably won’t work. Ditto for anything that will try hard to escape. Probably not water tight, though it’s fine for spraying/squirting extra water into the substrate and doesn’t seem to leak humidity out the seams. No lock option without burning/drilling further holes- just sliding tabs to keep it shut.

Compact acrylic enclosure (15.3 x 9.7 x 7.6 inches) suitable for smaller reptiles, invertebrates, or temporary setups, but not ideal for escape-prone or highly active animals. Easy to assemble using tab construction. Once built, it feels reasonably sturdy for light-duty use, though it is not a heavy-duty or fully sealed enclosure. The protective plastic film is difficult to remove at first, which slows down setup, a removal tab would have been most welcome. I have experience keeping reptiles and inverts, and I would consider this appropriate for smaller, low-risk species or short-term housing. However, it is not fully sealed, and fine substrate such as sand can leak through the seams. Sealing would be required if using loose or fine bedding. The locking top is a useful feature, but it feels somewhat underbuilt and not something I would fully trust for escape-prone animals. As expected with acrylic, there is noticeable static buildup. The included temperature and humidity gauge is very basic and may not be reliable enough for species requiring precise environmental control. One improvement would be an optional blank plug for the side sensor port when not in use. Overall, this is a functional compact enclosure for simple setups, but it should be used with awareness of its limitations.

I wanted something light weight to stack on top of my dumpy frog tank to move this little tomato friend into since surface space is precious in our small home. I took the chance on this acrylic tank in the largest size and so far I'm pleased with it! It did take a little while of peeling since the acrylic boards come un-peeled and the paper-y film does not want to come off in single satisfying sheets but rather tears around all the holes and connector puzzle piece edges. I do make acrylic charms as part of my art business however so peeling acrylic is something I'm quite used to but if you aren't this could get easily frustrating. The instructions are barebones which isn't an issue since it is literally a box except for when it comes to the top 'lock' tabs that are screwed in to the lid, they just show basically a picture of: tab piece + screw + vague area that might be the lid or the side which sounds like it would be enough but given the tab was facing a completely different direction in the illustration than how it actually goes on it did give me a few moments of problem solving. That said it wasn't a huge deal. I placed a clear plastic sheet in the bottom of the tank with a few inches extra folded up against each wall to form a "bowl" since I wasn't entirely sure how well this thing would hold water around the seams if Mr.Motato decided to go for a big splashy swim time or for whatever reason a water spill got down that far. You could also just use a bit of aquarium silicone sealant if you wanted something more permanent/effective but this solution means I can break it down flat again if I want to. The temp/humidity gauge seems very slow. It said 77degrees for nearly the entire day after getting it out of the box despite it being in a 71degree area. It was already on for some reason in the package and it was around 77 outside where the box was left so likely it was stuck thinking it was that temp due to a slow read. This morning it is saying 74degrees which is more likely given we have the house at around 71degrees and he does have a tiny hermit crab heater on the opposite side that should be shifting the heat up a little bit. Not sure exactly how accurate it is though. The humidity % changes much more readily. Overall not too worried about this since these things are fairly cheap to replace. I like the nearly seamless look of the acrylic tank, it gives a very clean/clear look to the whole set-up which I think looks a lot nicer than the alternative glass with front doors and a big black strip at the top, bottom and middle (exo-terra and zilla styles) I normally go with. It's not as heavy duty for sure but for a raised bachelor pad this was the right tank. Keep in mind that if you need to heat these you are going to want a HERMIT CRAB under tank heater, those are the only UTHs that are rated for use on any plastic/acrylic tanks. Other heaters may damage the acrylic and even release nasty fumes if they get too hot. So far the hermit crab heater i got for 13 bucks at petco has been working great under the raised tank. Overall this was a great buy, it's one of the largest acrylic tanks you can get on amazon, comes with the essential heat/humidity gauge, looks sleek, and the price is good for what you get. Most importantly my grumpy little boy seems happy!

I have had this particular product as well as a larger size and a vertical dimension for arboreal terrantulas since the summer of 2022. I will list all aspects I liked, disliked and my solutions. In my video, I show a quick view of one I assembled, and then the same model that is inhabited. These products have a great price point in comparison to the grossly overpriced trending brands. This particular model does NOT have the capacity to hold any type of moisture when soaking substrate, which needs o be one in winter months in New England when the home heat is used, and dries out the indoor environment. Unless you have a temperature and humidity controlled, dedicated criter room, these habitats dry out quickly from the large vent holes. These holes also allow smaller pray or critters to escape. These are NOT for slings or juvenile tarantula. What I have done to fix this is put caulking around the bottom and let the habitat ventilate until the odor is gone. Using aquarium caulking is also recommended since fish are in the water with the caulking and are safe, so any critter would also be safe. Many tanks are also a high density plexiglass rather than real glass now, so adhesion would be a success. The feeding hole on this model was a white plastic piece with the part number 22 on it. These come out with a slight breeze. I found an adventurous critter had lifted it out of the hole and was making her great escape. At that time I discarded the part and taped both sides of the hole with packing tape. With the next one I assembled, I put one of the assembly elastics around his part on the inside of the habitat, and it was held in place. It keeps the feeding hole option in place if I want it. All of the pieces have a tendency to warp with time, and temperature changes.bwhen my home neared 90 degrees Fahrenheit during late July, early August - I do not own A/C - the habitat warped. This can be an issue for prey to escape(feeder insects) or smaller species. Pay attention to the structure, and do not place a watering bottle or other items on the surface of this habitat in hot weather; the plastic is not rigid in warmer weather or direct light, and will warp. I have not iscovered a way to fix it, yet. I may take a heat source to it and then flatten it in my freezer as a trial. I really like these for viewing and keeping adult tarantula, but wish they were water tight, did not warp easily(at the hinge line in last picture), and the feeding hole plug had a more snug fit.

GUYS!! DO ME A FAVOR AND PLEASE DON’T BUY THIS PRODUCT!!! very unstable and falls apart easily to the point my millipedes escaped and now they’re gone. Some how at night the top fell on the enclosure and part of the side came undone. I took no pictures because in a panic I tried to find them under the fallen piece. I am so upset and furious that babies have escaped. I know the bug community and reptile community cares deeply about their babies so I know that the community feels my passionate heartbreak as my babies have left due to this un-sturdy and flimsy enclosure. I gave this product a chance because it was on the cheaper side (big mistake) and since it was bigger than the tank I currently have . From now on I will buy a more expensive tank for my babies if that means my millipedes will be safe.

Easy to assemble, good quality, fast delivery, great price

The seller shipped fast! Easy to assemble, has a thermometer if needed, and just looks very clean and attractive. The plastic (acrylic?) is not 'cheap', so the tank has a nice weight to it. I bought one to hold meal worms and an additional one for the resulting beetles. Lots of room (1000 meal worms!) for everybody. The top lid has hinge-type feature to access the inside w/o removing the whole thing. Slender air vents are placed high on 'walls', and prevents the critters from escaping. I am very pleased w/ this product.

That protective film is almost too protective. Took forever to get off. However product is wonderful. Put together well and shipped on time. Will be buying again

I have been looking for clean, clear, affordable acrylic enclosures for years. The Exo Terras are expensive, and they have screen tops that aren't optimal for spiders. These have tons of cross ventilation, are easy to set up and are big enough for pretty much any species of tarantula. Lid swings open on top, and is all smooth acrylic. I'll be buying a bunch more of these but honestly, they are so perfect for tarantulas that they really should advertise it as such.

Hicimos una muy buena compra, el terrario ha cumplido con las exigencias. Tenemos una tarántula café chocolate.

Me encantó el tamaño, la calidad y el costo. Fácil de armar y muy firme. Excelente para tarántulas.

These were so simple to build. They look so sleek and very functional. I absolutely love these i wish they came in taller options for my climbing 8 legged friends. Edit: finally got one of my guys set up in here and i love it even more! Now i really want bigger ones

Great product!!! Easy to assemble, perfect for my tarantulas.