Metra 95-8202 Fits Select 2000-2017 Toyota/Scion/Subaru Double-DIN Kit

Perfect fit, super clean look. This with a CarPlay stereo makes my 2008 4Runner SR5 feel like a brand new car.

Works great after cutting it down to size...or grinding it down to size... Fills in the side holes on my 04 tundra double cab that I just put in a kenwood dmx 9708s . Had to grind down the factory brackets just a little as well due to them have a little lip where these brackets cover... Just grind them down a little and it will sit flush and look great in the end... it's not that hard to do at all

I used these to install a Pioneer FH-X720BTin a 2005 Sequoia Limited with JBL system. The trimming of the plastic was easy enough to do for this vehicle as it only required a straight line cut. I scored the plastic with a sharp knife and then bent it and it broke cleanly. This product fills the gaps adequately on the sides of the new double DIN aftermarket head unit. The following may help any of you installing a similar head unit on a Sequoia like my '05 (and maybe other models?): At first there was a gap on either side of the unit, but it was because the whole head unit was too far back in the dash, not because these Metra trim pieces are not wide enough. This is not a flaw of the product, but rather I think is a limitation of the factory head unit mounting brackets and the available mounting locations on the Pioneer unit. I installed the brackets as far back on the new Pioneer head unit as possible but there was still a gap. The head unit needed to stick out out of the dash just a little farther. I found a simple solution. I got some 1/2" nylon spacers from Lowe's and some longer mounting bolts (you need 4 of each). The spacers were 1/2" x 0.257" x 1/2" and came in a package of 2, Hillman brand I believe. The longer bolts were M6x30mm and came in a package of 4. You need 4 bolts and 4 spacers. These were found in the specialty drawers on the fasteners aisle at Lowe's. I placed the nylon spacers behind the factory head unit mounting brackets and then fastened the brackets to the vehicle with the longer mounting bolts and the result was that my head unit now sticks out about 1/2" farther away from the dash and into the cabin which solved my gap problem.Now the Metra trim pieces sit more flush with the rest of the dash surrounding the head unit and look more factory. Note: be careful when you're trying to thread the bolts through the nylon spacers behind the factory mounting brackets because if you drop one down into the dash, good luck finding it. Ask me how I know, haha.

These fit perfectly into my 2006 Scion TC with Pioneer AVH-P4300DVD unit- with some modifications. You need to understand this is a generic part made to fit several models, and while they do a fairly good job, you will need to either cut or shave them to get them to fit just right. I had to cut off one of the mounting holes since it interfered with the bracket. Also, since the 4300 has a motorized display that slides out, I had to shave down the sides to provide the clearance necessary for the screen to move. Once that's all been done, it looks great now. Fills in the gaps perfectly and looks like a pro install. Just realize that you may need to do a little extra work... but if you have your dash apart already and are installing a double DIN cd or dvd player, you probably are ok with that. Giving it 4 stars only because of the extra work it takes to make it fit (in some cases, like mine) although I understand that. But I'm sure not everyone will. With the final product it is definitely 5 stars.

Works great!

This works great for a dual din radio. Doesn't fits perfectly and needs to be modified for a slim dual din. It does makes the radio looks like factory. Very cheap in price, but is missing something else. For my 06 Toyota Tundra, this part only makes the radio look flush to the trim. There's nothing to hold the radio itself in place. Had to use the old adapters off the factory radio and incorporated these things so the radio fits.

Love it

This is not plug and play. Be prepared to carefully sand the flat edges down against a sanding block to get the correct fit/width. I also needed to remove one of the raised plastic screw bases with a Dremel. But the result looks nice and clean.

These fit the JVC Kenwood radio and Toyota Echo I was installing it in. The only thing to note was the stock location of the the stock brackets need to move when applying these brackets and the JVC radio. Once positioned in the correct holes, everything goes together very easily.

This item installed as advertised

As per describe.

El material con el que está fabricado, es de buena calidad. Y fue e instalado en el auto

A adapter pas mal mais , pour le prix c'est top