Journeyman Electrician's ClipTechPouch + Hub with Shoulder Strap

"The Toughbuilt TB-CT-114 is a game-changer for electricians. Its 21 pockets offer perfect organization for specialized tools, while the ClipTech system allows for effortless attachment to any belt. The integrated kickstand is incredibly useful for keeping tools upright and accessible on the ground. Built with rugged 6-layer construction, it's durable enough for any job site. Highly recommended!"

After seeing a lot of guys at work using Toughbilt bags, I purchased several styles to try out. Ultimately I settled on this one as it fits most of my needs. Pros: The clip feature is great as far as being able to take them off and on your belt quickly and then using the stand feature to allow you to work out of the pouch without it falling over. Plenty of room in the pouch for almost everything I need Quality of the pouch means it holds up well over time. I’m hard on tool pouches climbing up and down ladders all day in and out of attics and crawl spaces and through wooded areas. The warranty is fantastic. Emailed their support about an issue with the hub part of several bags and had a whole box of new ones at my door in about 2 weeks. Cons: over time the clips wear out, sometimes you get an advance warning as the pin that allows it to pivot open will start to slide out one end. Other times they just snap. Would be nice to see a revised clip and hub design possibly out of a more durable material such as metal. When either of those parts fail, it means picking up all my tools that scatter and there’s a potential to cause damage to a customers property or lose a tool. The dividers in the pouch center don’t go all the way to the bottom and allow objects to work their way down and across the bottom of it at times. Eventually I’ll make some dividers out of something like kydex to solve this issue. The loops on the front and the flashlight holder near them are useless to me as are the pockets on the outside on the other side of the pouch. I don’t carry a large flashlight, though I have used it for a hammer and the tool pouches just don’t fit things the way I’d like leading to tools sliding out the bottom or popping out the top. Overall I’m happy with them for the price and also have purchased 2 different drill holsters and several other bags from them. I have a board in my work truck where several different bags hang for different purposes and it’s nice being able to grab the one I need and go. It’d be great if they let you design a bag from a list of options to be able to add or remove certain features but that’s asking a lot at this price point from a company that mass produces them. I’d be willing to pay more for customization however, and I’m sure others would as well.

I started as a relay testing tech recently and was in need of a small, but capable, tool bag. I bought this pouch for the variety of pouches and especially the clip system. Why it works well for me: The middle main pouch is where my Fluke 1587 lives. It’s a little tight with the probes, but I’m sure it will loosen up a bit over time. The left and right main pouches hold my Klein auto strippers, Greenlee crimpers, and fuse pullers. The two front pockets work perfectly for my lineman pliers and side cutters. The skinny screwdriver loops on the right hold my insulated screwdrivers, and the wider loops hold my 11-in-one screwdriver and flashlight. The skinny pocket at the top of the main compartment holds scissors and flush snips, while the tiny pocket is perfect for a flathead tweaker. I bolted a rubber coated neodymium magnet to the belt clip. This allows me to hang it from equipment cabinet doors, I beams, and even steel entry doors. This is the main reason I opted for this brand. I can then unclip it and clip the bag to the clip I bolted to the inside of my truck topper. What could be better: The adjustable flashlight loop is pointless. I’d much rather have a pocket that size with a closed bottom for pens/highlighters. Additionally, the phone pocket is the most ridiculous thing I’ve ever seen. The only use I’ve found is a box cutter, but the pocket is too deep, making it hard to get out. Overall, it’s a great bag. 5/5 would recommend.

The first time I bought this pouch, I did not like it, but after reviewing a few electrician's pouches, I came to the conclusion it was not bad at all. I bought another pouch, it's a bit stiff, but I'm sure it'll get softer, it looks very sturdy, but time will tell how durable it will be. I started putting my regular tools on it, and I was surprised how many I could put in it, the inside pockets work for my needs. I'm still adjusting my tools, but I have plenty of room for my needs.

I use this every day for work only downside is it will get heavy enough to pull your pants down

The pockets and slots are not exactly what I want but it is close enough and it is well built. It has a folding flap on the back that you can pull out so that it stands upright. This is very handy when working low. I can take it off, set it next to me and get to my tools. Overall I am impressed. I also have the impact driver holster with the fastener bucket on the front and it works equally well. I screwed a spare clip to my supply shelf and hang it there when I'm not using it.

I'm an automation tech for Pepsi and I have quite a collection of tool pouches that I hate. If you are in any sort of tech or maintenance field, this thing is great. I can take it off and put it on quickly, without fuss. If I arrive at a problem and need to be flexible but maintain access to my tools I can remove it, pop out the kickstand and everything is right there where I need it. For big jobs, the roll around chest has to come out, but for 99% of what I do, this pouch fits the bill. No more small pouch and flashlight all day when I don't need it. Great design and durable. The height of the pouch puts tool placement and weight distribution in the perfect location for reducing carry fatigue and getting to things much easier.

Use this bad boy everyday. Have it clipped on the quick disconnect system- clips on wall of work truck. I clip/ unclog multiple times a day- this has held up with no real wears issues- SUPER HIGH QUALITY AND LOVE ALL THE STORAGE!

Se ve de muy buena calidad, es amplio y robusto. De momento perfecto. Ahora solo queda ver el aguante del uso diario pero tiene pinta que la calidad es excelente.

f you are doing electrical work and tired of fumbling with heavy, static tool pouches, the ToughBuilt ClipTech series is a serious game-changer. It is well worth the investment. Ultimate Organization: This system allows me to organize my tools exactly how I need them. Whether I'm doing a full panel install or just a quick trim-out, I can carry only what I need. Revolutionary Clip System: The clip-on/clip-off technology is incredibly easy to use. I love being able to take my pouches off my belt and stand them up on the floor using the integrated kickstands, or swap them out in seconds. Rugged & Reliable: These pouches are "ToughBuilt" for a reason. They feel incredibly durable and are clearly designed to handle the daily grind of a job site. Final Verdict: These are pretty amazing. They save time, save your back, and keep your tools right where you need them. If you're a pro, invest in these—you won't regret it!

Had it over 5 year ,going to upgrade to the bigger one, from boiler room bms installs to small domestic job it’s spot on , won’t believe how much I fit in it, tryed loads of other but keep going back to it, just gonna stick with it now, can’t find better👍

Jako je dobra

arrivato oggi. fattura ottima ,molto robusto e ci sta davvero tanta attrezzatura. di fattura militare, si vede che è di concezione americana. consigliatissimo !!!!