Feyachi Heat Resistant Brass Catcher for AR Thickened Nylon Cartridge Casing Shell Catcher Net with Quick Release Zipper, 2 Picatinny Rail Mounts - Holds 100+ Casings

Works fantastic for high volume shooting. I do think it may have been responsible for some jams as the shell didn't clear quickly enough by getting caught up in the net, but it is to be expected. It doesn't distract from training, and I am able to retain brass for reloading.

Great. Works as it should. Adjusts to fit my ar15 and my ar10. Multiple calibers of each and it catches them all. Instructions are a little vague but it’s pretty self explanatory. Just undo all the Velcro strips before you begin and it will work a lot better. Holding 30 spent 223 just fine. 20 spent 308. I’ve only shot 10 of other calibers so I can’t say how many it will handle past that. Holding up good so far. The quick connect button is a little wonky at times but hasn’t failed to operate. It is extremely easy to use and easy to empty. Keeps brass in and makes cleanup after shooting non existent. Just dump it in a bucket and you’re done. Wish the pouch was a bit stiffer.

Alright. Why did I buy this? I'm a competitor who LOATHES loosing brass. I compete, I eject a casing, it goes who knows where, and now im short a piece of brass that I put way to much time energy into to perfect. I run one piece mounts which is the crux of this component along with scope rings that sit low to the rail. In my case there simply isnt enough room in any of my setups to mount this above the bell without sacrificing something. So if you're running 0MOA in your mount /w a 34mm tube, forget about it without compromising something. Also, the way the latching mechanism works, there wouldnt be enough be enough room to actuate the button to remove it without running into my mount. Setups with red dots work well. Storage -> For my use case, there is enough storage to hold at least 12 pieces of brass. For a stage for what I compete in, thats all I need. I could def get more cases in, but im going to eject every single one at the end. Directions - The directions are very well written. It's basically a two part system. You have one female end that stays on your platform, and a male end that connects in. The male end would only get removed if you were switching things around or wanted other empty the casings that way. There is a zipper opening on the bottom of the bag that being honest I wish wasnt there as it will likely get pulled and spill its contents. Nothing a zip tie wouldnt fix though. Durability - I expect it to last a season of moderate training / competition. I think thats worth the cost of loosing enough pieces in a batch of brass. I'll end up throwing this on my training platform to see how it performs long term and update if any negative occurs. Functionality and fit are going to be user depending. It sits close enough to the ejection port to capture. There may be a bit of timing with moving It along your platform's rails or its rails, but theres plenty of space to figure it out as long as you can maintain your eye relief. In my opinion, this setup is more suited for split rings than a one piece, but if you're willing to tinker you can make it work. My MPA mount wont afford this, so It will live on a practice rig. Still great value.

I bought this for my dad and he’s been really happy with it so far. He wanted something to help keep brass from flying everywhere while shooting, and this has worked well for that. It catches the casings consistently and makes cleanup a lot easier afterward. He also mentioned that it was pretty simple to attach and didn’t get in the way while using it. The material seems durable enough to handle regular use, and the heat-resistant mesh was a nice feature since the brass can obviously get hot pretty quickly. Overall, a practical accessory if you’re tired of chasing brass around or shooting in areas where cleanup matters. Would definitely recommend for anyone wanting an easier and cleaner setup at the range.

Great product. Second one I bought to have on several receivers. Works great and easy to remove quickly. Multiple mounting options for different setups. Saves alot of time chasing shells.

great fit and it fits low-profile on your rail, don't get caught not policing your brass

Have several of these. Perfect for anyone wanting to reload their spent brass

Just a note to those with normal scopes on their rifles, this will NOT work with a scope with average ring height. For whatever reason, their chosen picatinny rail mount is taller than it needs to be, which then also needs an additional layer clipped to the top. My rifle's scope uses medium rings and while the mount was able to be mounted underneath the scope, the catch did not have clearance to fit. Which is a shame really because the design and quality were great for my intended use and it even came with 2 mounts for attachment onto 2 separate rifles, but alas I need my scope.

Excellent unit! Easy to install and remove. Works well to collect the casing after firing. No longer have to collect off the ground. Simply to empty. Would recommend

I have a rifle which is throwing brass 10+ meters away, which is inconvenient in many ways. This brass catcher was easy to install (no adjustment was needed, it just worked), and it works very well. Very conveniently it comes with two bases, which you can install on two different rifles, and just quickly attach the brass catcher to the rifle you're shooting right now. It's definitely well made (metal where it should be) and still not too heavy. I've never used a brass catcher before, but now I see that it can be useful in different scenarios.

Put it on my .22 semi. Had to raise the scope with new mounts. Seems to work and is holding up. I can actually leave it out enough that I can use the action without having to take it off. No more mess of empty casings.

Good adjustability and well made. Equal to or exceeds quality of much pricier name brand of same design. Priced more than fair for this product. .22 lr bolt action rifle bench rest shooting.

Buy a few. Very handy and inter changeable. Easily removable from the rail. Catches the brass, not in the way of the action at all.