The Tile Doctor Starlike EVO - Litokol Epoxy Grout for Tile, Ideal for Home Office Decor & Bathroom Tile, Glitter Paint Room Decoration - 100 Bianco Assoluto Classic Collection 2.5 kg - 5.5 lbs

I found dividing the product into quarters and applying with automotive bondo spreader worked best. Do your best to minimize the epoxy on the tile. Wait 24 hours, then scrape with a razor blade and mist with a spray bottle filled with Dawn and water and work with a coarse scotchbrite pad. Wipe with a clean towel immediately after. It’s a lot of work, but when you’re done, it looks great and will last for a really long time

This stuff applies way better than the kerapoxy cq we used for the first bathroom. The grout sand in this is fine compared to the coarse sand in the kerapoxy. There was enough liquid hardener (5.5 oz) to measure out on a scale in a cup and divide it into 2 batches keeping the ratios perfect. Follow the instructions exactly! they like it to go on with the tile dry. It took 2 ea 5.5 lb containers to do our tub of 32 x 60 x 80" high using 4 1/2 x 10" tiles with a 1/8 space. They say work time is an hour but I divided it because I'm slow and I probably didn't need to. It wasnt hard after sitting for an hour but it was rock hard the next day. Cleanup was great. No haze after first rubdown and 2 washes. Did 3 washes but probably didnt need to. Clean water makes it nice. I also noticed that it was well packed and the containers were undamaged. There is a plastic divider between the bag of hardener and the hardener was in a tough plastic bag

This is super water repellent and that's great. We wish we had purchased the non-sanded grout from this company instead, because we had to razor off the sandy stuff even after all the precautions we followed. The fact that we could still do that after it dried was amazing.The directions are specific which was great but intimidating that we would do something wrong and'yellow' our grout. Didn't happen, but this was super messy, and challenging to apply.We used way to much material at first.It was critical to finger depress between the white beveled tile we used, (gloves on yes!) to get this to not fill in large spaces instead of the small we were looking for.We put a long skinny tile behind the sink to stop mold issues on our butcherblock counter top which worked very well only because this grout is super water repellent and easy clean. Tough to apply but worth it in the end.

This can be used over existing grout. It is more work, but worth it! It's stickier than traditional grout so you should be careful to not get it on tile or clean tiles more during the process.

It was not good instruction how to apply. Really think and only last 1/2 before it does get hard. After that really hard to remove. I don't think we get the 5.5 pounds of material. If spill on thewall or flor of the pool it does get stain and even if you get it out left me wiuht a big mark. Thats way it did not have good ontrution. Really bad product

Followed some advice about sealing pebble stone since epoxy grout will discolor the stone. I applied 511 Impregnator Sealer to white pebble stone and waited 24 hours before grouting which was also white. All stones turned brown, and yellow and beige with Starlike and along with an additive... after a few days, decided I couldn't live with it and have since dug it all up and still in the process of starting over. Expensive lesson and mystery.

This stuff does not go far. It took 3 of these to do a small foyer.

High quality Italian epoxy grout that applies easily and looks fantastic. My shower floor looks brand new. Follow the instructions, and you’ll love the results. DIY is so cool. Highly recommended.