







Desertcart purchases this item on your behalf and handles shipping, customs, and support to USA.
❄️ Keep your AV gear chill and your home theater envy-worthy!
The AC Infinity AIRCOM S10 is a sleek, low-profile cooling blower system designed for AV components like receivers and amplifiers. Featuring three dual-ball bearing blowers with PWM-controlled motors, it delivers a powerful 160 CFM airflow at whisper-quiet 24 dBA noise levels. Programmable with two thermal trigger modes and four fan speeds, it ensures optimal temperature management to prevent overheating and extend component lifespan. Its durable alloy steel and aluminum construction supports stacking up to 30 lbs, making it perfect for tight AV setups.

| ASIN | B078PX4575 |
| Air Flow Capacity | 160 Cubic Feet Per Minute |
| Brand | AC Infinity |
| Brand Name | AC Infinity |
| Compatible Devices | Television |
| Cooling Method | Air |
| Customer Reviews | 4.7 out of 5 stars 825 Reviews |
| Item Dimensions L x W x H | 43.2L x 34.3W x 3.8H Centimeters |
| Manufacturer | AC Infinity |
| Material Type | Alloy Steel, Aluminium, Silicone |
| Model Number | AC-ACS10 |
| Noise Level | 24 Decibels |
| Number of Items | 1 |
| Number of Packs | 1 |
| Part Number | ACACS10 |
| Power Connector Type | 3-Pin |
| Product Dimensions | 43.2L x 34.3W x 3.8H Centimeters |
| UPC | 819137020320 |
| Unit Count | 1.0 Count |
| Voltage | 240 Volts |
| Wattage | 8.8 |
F**I
Infinity fans for Avr receivers .Go for it .Very useful product for home threatre setups
Excellent product .Does what it says, perfect match for any Avr receiver.Go for it .
K**K
It an excellent product worth value for money.
This is an excellent product and very useful to protect your expensive AV Receiver from getting overheated.
A**R
Excellent product
Product works perfectly. No issues. Only concern is the high price. In US, they are very low priced compared to the price charged by Amazon in India.
M**O
aucun probléme à ce jour pour l'instant concernant les achats sur amazon et la livraison également
produit de qualité et instalation facile
N**O
Better than expected
I have a Denon AVR-X3600H and Oppo UDP203 located in a cabinet that has a perforated door for airflow. Despite the perforated door, the amp used to get so hot, you couldn't put your hand on the top of it. The heat used to build up so much that the Oppo UDP203 would also heat up. Although neither piece of equipment would shut down, I was worried about the long term affect. I read other reviews on the Infinity AIRCOM S10 so decided to give it a try. I can say that I can't recall being so satisfied with a piece of kit. I love that it draws the air from the bottom and blows it out the front, through my perforated cabinet door. I set it to auto so that it would turn on automatically at a fan speed required to keep the Denon, when it is turned on, at a temperature that is acceptable. The fans at full speed are quite audible in a silent room though on the auto setting, the AIRCOM S10 keeps the fans in the lower RPM range which is very quiet and keeps all my equipment very cool, even when it's on for hours. I can unreservedly recommend the AIRCOM S10 for keeping equipment cool.
パ**ん
発熱量のパワーアンプやプリアンプ、AVアンプを効果的に冷却
必要以上にアンプが熱くなるのを、効果的に冷却してくれます。真夏の時にパワーアンプがかなり熱くなり、寿命に影響があるかと心配していましたが、これで安心できます。プリアンプ用にAIRCOM T10も購入を検討しています。
J**A
W mojej ocenie NIEZBĘDNY!
Produkt w 100% spełnia swoje zadanie, temperatura amplitunera została należycie obniżona [patrz foto] co mam nadzieję wpłynie na jego pracę i żywotność zastosowanych komponentów. Urządzenie bardzo dobrze wykonane, estetyczne i pasuje do reszty sprzętu. Proste sterowanie, wyłącznie niezbędne tryby pracy: on, off, auto i smart oraz 4 prędkości wentylatorów: 1 nic nie słychać, 2 słychać ale jest ok, 3 dość głośny i 4 najbardziej wydajny, ale może do zastosowania w procesie szybkiego chłodzenia, bo normalnie nieakceptowalny ze względu na bardzo głośną pracę. Jaskrawy wskaźnik poziomu obrotów można wyłączyć przez 3 sek. przytrzymanie przycisku menu. Mógłbym się przyczepić do sposobu wyłączania w trybie auto, którego używam ponieważ po wyłączeniu amplitunera, w procesie jego stygnięcia S10 wyłącza się bo jakimś czasie, wtedy wzrasta temp. z powodu zalegającego ciepła, więc znowu się włącza... ampituner stygnie, więc się wyłącza, potem włącza... itd. Zajmuje to kilka cykli i trwa dość długo. Nie jest to może najszczęśliwsze rozwiązanie, bo można byłoby inaczej ustawić jego czułość. Jednak biorąc pod uwagę cel nadrzędny, jakim jest chłodzenie, można na to przymknąć oko. Podsumowując ten może ciut przydługi opis... polecam!
R**M
Cooled Amp as if It Was Not Even Powered On!
** EDITED REVIEW MAY 7, 2022: After using for 1 year, the Aircom S10 continues to impress. I did make one change, however, to the settings below. The change was to set the device to Mode=Auto/Fan=Low. The reason for the change is that I kept forgetting to turn the fan off manually when set to Mode=On/Fan=Low. I also had the occasion recently to check for dust build-up, and I am happy to say the amount was minimal - the fact of which I attribute to the low fan speed setting. ** MODEL PURCHASED: S10 (w/front exhaust) COOLING SETTINGS USED: "Mode=On/Fan=Low" TRICK TO GET FAN SPEED LIGHT TO TURN OFF: Press and hold Mode/Power button (far left while facing unit) for 3+ seconds, then release and wait a few seconds for fan speed light to turn off. When the fan light is "Off" it is truly invisible behind the faceplate bezel, as you can easily see (or not see!) for yourself in the attached pictures. MODE/POWER LIGHTS REMAIN ON: The mode lights - which double as "Power=On" lights - will remain lit depending on mode selected. However, they are not overly bright. In my case, using the "On" mode, only the very tiny white light remains lit. I did not find it distracting. TRICK TO TURN UNIT OFF: Press and release the Mode/Power button to cycle through the modes to reach power off state. In my case, 4 presses are required to reach power off state. AMP USED: Twenty-plus year old NAD 906 Multi-Channel Amplifier with three separate (and very large) power supplies, and six discrete/bridgeable channels. The NAD 906 amp was advertised as having "high quality, high temperature" components. Inside there is a lot of chunky metal, so to speak, that not only produces its own heat but also holds any heat around it. Most significantly the amp has no fans, which is a tip-off it was designed and built for consistent performance at high levels of heat. However, when considering the massive amounts of chunky metal inside, it is clear that the 906 would shed heat very efficiently with any kind of increased air movement across any of the metal, especially the large heat sinks. AMP DUTIES: 4-channel Atmos/DTS-X amplification of "Dolby-enabled" Height 1 and Height 2 speakers line-out signals from NAD 758 v3i receiver. (Note: On the NAD 906 amp, I employed two channels on far right of chassis and two channels on far left of chassis to widen heat distribution/dispersion.) AMP PLACEMENT: Cabinet shelf, two 2" holes in cabinet back cover, open front, no other electronics in same shelf or above/below. SEE BELOW for AMP TEMPERATURES at VARIOUS AMP STATES (Note: Measurements taken at center/top of amp cover, and room temperature is 75f average): With Fan NOT In-place/NOT In-use (i.e. prior to purchase): 77f - Amp Off (TV, lamps, and exterior wall by cabinet create ambient heat increase 2f higher than room average) 94f - Amp On/Idling, RCA inputs from receiver not active 111f - Amp On/Idling, RCA inputs from receiver active but w/no signal (strong "Class A" bias?) 120f - Amp On, temp after 140min movie w/Atmos content ("Ready Player One") With Fan IN-PLACE/IN-USE but removed for measurements AFTER MOVIE: 77f - After movie, amp immediately turned off, fan immediately removed, amp temp immediately measured after 140min movie w/Atmos content ("Ready Player One") 85f - Amp left off, fan still removed, and temp measured after 20 minutes 86f - Amp left off, fan still removed, and temp measured after 40 minutes PERFORMANCE/TESTING CONCLUSION: The AIRCOM S10 performed beyond expectation, using low and quiet air flow to keep my amp at 77f while in normal use, which is as cool as it is when powered off. To give some credence to the above active cooling effect's astonishing measurement of 77f, you can see from my other measurements that the heat increased (as expected) after the amp was off and the moving air's wicking effect was removed. Still the amp's heat had only increased to 86f after 40 minutes. I am confident leaving the fan on for 5-10 minutes after the amp has been powered off would wick away most if not all the residual heat from the sinks. To be fair, the amp is not cluttered inside, has enough slits in the top and bottom shrouds to easily call them screens, uses very large heat sinks that allow for amazingly quick heat conduction, and the movie was not overly loud. OPERATIONAL TESTING/CONCLUSION: I did not want to wait for the amp to reach the mid- to high-80's before the fan would automatically turn on, so I avoided all of the S10's automatic settings. In my testing, and now ongoing use, I decided to just manually turn it "On" at its lowest setting (which is very quiet) when I started watching a movie, and thus it would always stay many degrees ahead of the amp. Said another way, by turning the fan on at the same time I begin using the amp, the fan would not have to "play catch-up" with the amp if the amp had been allowed to get hot, first. I work with huge servers in datacenters (and have my own computers) and, in my opinion and based on experience there is no real benefit - aside from convenience, which will understandably be the winning feature to others - to waiting for a fan to do its job later rather than sooner. Now, what I will do differently in the future - distinct from my measurement process above - is let the fan run for a little while after the amp is turned off. VALUE CONCLUSION: With over 20+ years under the belt of my NAD 906, the AIRCOM S10's outstanding ability to remove heat from that hot-running amp will only help it remain stable and useful longer than otherwise. And the cost of the AIRCOM S10 is far, far less expensive than buying a new amp of similar quality.
Trustpilot
2 months ago
2 days ago