TG-BP6J70078 Tyger FURY Stubby Front Bumper w/Winch Plate Compatible with 2007-2026 Jeep Wrangler JK/JL; 2020-2026 Gladiator | Textured Black

Love the stubby bumper on my JL Wrangler. Super strong bumper with a beautiful finish. Added a Warn winch that mounts perfectly. Took my led fog lights off oem bumper and they mounted easily. Bumper comes with 2 sets of brackets, one "JL" and one for "JK". Has mounts for front license plate. I have bought 2 of these bumpers. One for my JL 2 door and another for my JK 4 door. Definitely recommend this item! 5 stars all day 😀

This bumper is absolutely incredible for the value! It’s super heavy-duty, and the best part? My Jeep factory fog lights fit perfectly in it! While the installation was a bit tricky on my own—definitely recommend having a buddy to help line up the bolts to the front of the frame—once it was on, I was blown away! There's a spot for a winch that I can’t wait to add in the next couple of weeks, plus plenty of room on top of the bull bar for some awesome aftermarket off-road lights. I’m thrilled with this purchase! A+ all the way!

Easy to install, sturdy and looks great.

I was a bit skeptical for the price but gave it a shot anyway. The bumper arrived in perfect condition. The steel is sufficiently thick and the bumper feels heavy and solid, which good when it comes to bumpers. And the abrasive finish is just...cool. Installation instructions were very thorough. The fog light harness retrieval from the stock bumper was about 50% of the job. So, all in all, it looks great, and I just ordered the matching front skid plate and rear bumper!

Liked: Heavy duty, nice looking, good features. Didn't like: missing Several nuts for mounting the fog lights. Had to run to the hardware store for 4 nuts and back. Wasted almost an hour finding them but was in the middle of the install so didn't want to go through the hassle of waiting for seller to send the missing nuts. Poor design with the fog light mounts making it almost impossible to put the tiny washers, lock washers and nuts on the bolts...barely enough room to stick one finger in some locations while trying to balance the washers and lock washers on your finger tip to slide into the bolt from underneath, then good luck trying to add the nuts without the washer and lock washers falling off in the process , let alone trying to actually tighten them. I know I spent at least 3 hours messing with installing the fog lights, just due to the challenge of trying to attach the nuts and bolts! Same issue with the main bumper lower mounting hardware that holds the bumper to the frame in the jeep. Almost impossible to get the lower mounting bolt part that you insert into the bumper to line up with the insert tab so you can insert the bolt into the pre-welded nut. Then the bolts were almost impossible to insert/thread into those weld mounted nuts ...it was as if they were slighty too small or maybe an incompatible thread inside the nut. I had to force at least two bolts to thread and tighten, and no it wasn't cross threaded. Then once I got these lower bolts almost tight, I had to be careful because it felt like they were stripping when I went to actually tighten them.. only using a regular hand powered rachet tool with reasonable force so they would be secure. It took me about 9 hours split over 2 days to get the stock bumper off and the new Tyger Bumper installed, mostly due to the issues with the mounting hardware. Could have been designed to be more user friendly or maybe redesign the hardware so the customer doesn't have to deal with such rediculous challenges with the tiny hardware and difficult to align main mounting hardware. Side note: in my new 2023 Jeep Gladiator, the stock bumper mounting bolts (8 total) would not break loose, after 30 minutes of trying everything and every tool I own to remove just one nut. luckily I own and air compressor, so I decided to go to Harbor freight and buy a stubby air rachet tool. It made all the difference. I got all 8 nuts off the bumper in less than 10 minutes! Conclusion: great bumper once you manage to get it installed. Definitely inventory all provided hardware before you start! Will save you time and aggravation later. I'm 65 and have multiple disabilities, but I managed to do the install alone, but having a competent helper would be good. Also owning a mechanic creeper with wheels, a battery powered led work light and a good small flashlight are definitely a must. I would have given 5 stars if some of the tiny washers weren't missing., and the if the mounting hardware for the bumper fit better and was easier to mount/align. Mounting hardware and how it is mounted needs redesigned. Its good once you manage to complete the install, but way to frustrating and time consuming.

Absolutely love this bumper. Powder coating is excellent. Easy install. Looks great and built well.

First off I love this company. They make really good products. I have had the bull bar and side steps on my tacoma for a few years and have had no issues with the coating chipping or flaking off and no rust what so ever. I really like the stubby bumper looks with the recessed winch mount and factory fog light mounts. It only took me and my 17 yr old son an hour to take off the factory bumper and get this one mounted. Make sure you have the little plastic thing that hold the brackets tight and line up the bracket bolts before you shove it on the jeep. My son didn't line them up when we were putting it on (my fault for not telling him to) and trying to get the bracket back in while halfway on is not a fun endeavor. Be sure to put the factory fog lights in before you put it on. This thing is a lot thicker metal than I expected. (which is great) The instructions were okish with pics but were a little too dark to make out but ehh who need instructions? And some of the fog light bolts have a lot of paint on them so they are a little tight when you start them(I cut the supplied allen wrench off and threw it in my drill). Over all I am super happy with the looks and function of the bumper. When I get the winch mounted and put some strain on it we will see if Tyger Auto lives up to my current expectations. But if you are looking for an inexpensive stubby bumper for a jeep that looks good I do recommend this one.

Installation quand même facile , le plus long son l'installation des petits lumière ahaha . Bon qualité ! 5/5

Easy instructions.Need two person when putting the bumpee on the truck because you need to align the bolts.Other than that kinda easy.Seems sturdy.Bolts are long enough so it screws easily.

By far the best bumper in this price range, specially when its on sale

Bumper is solid and easy to install except for the headlights and tiny little screws provided. After dicking around for an hour or two trying to get the fog lights in with tiny screws, I decided to use my own hardware and got them in within minutes. The bumper is a bit challenging but I managed on my own in just a few minutes.

I really like this bumper, the pics don't do it justice. it seems to be really well made, a thick, textured powder coat (hopefully it lasts) like others have said, put the fog light brackets on the lights before install and longer bolts. save yourself the hassle and buy bolts about a 1/4" longer, the supplied bolts are too short to put flat and locking washers on all at once.