- Stainless Steel Prep Table NSF Commercial Work Table with Backsplash and Undershelf for Kitchen Restaurant 72x24 Inch

Nice and sturdy, I ordered quite a few to set up my 3D printing lab in my garage. These tables keep my lab look clean and organized.

Solid countertop that feels sturdy. Arrived without a scratch or dent. Assembly was easy and so was taking off the plastic protective sheet, top piece came off in 1 piece, the bottom because it is wrapped around the edging was not as easy yet 98% of it came off in one piece. I got it as a gift for my nephew and he is getting it later today. It hasn't been used yet so I can't comment on that, I will update after he gives me feedback. It is the 36x24 with backsplash. Thank you

I really like this table for my craft room, but I’ll tell you this about the item. 1) take the plastic wrap off before putting it together, this was the hardest and most frustrating part for me. 2) You really don’t need 2 people to put this together, I’m a girl and I did it by myself. 3) when assembling put a towel down to protect the table, 4) don’t take those little screws all the way out.. you’ll be sorry!! They are hard to put back in, and finally you need a measuring tape or ruler bc you need to measure the legs to make sure they are all even, I measured from the groove. It’s really nice .. oh and get stainless steel cleaner.

This is the 36" wide x 24" deep table. It arrived on time, was well packaged, and the assembly was easy. The adjustable legs makes this tables very sturdy. As of right now, i am very pleased with the construction and design. However, time will be the true test for this table as it will be sitting outside for the next 7 months. *** UPDATE *** it has been an entire camping season and this table has been in the elements the entire time. I basically just cleaned the top of the table every time before use and left the bottom shelf to its own demise. Just so everyone knows I am keeping my 4 start rating, because the lower shelf is not stainless steel, it is aluminum. However with just water and a green scrub pad.. it comes clean. I am impressed with this table so, I Just purchased another one.

It came in good condition, no dents that I have noticed yet, I think one of the legs put a hole in the box, but I got this about 6 months ago and I do not remember it that well, so at least not so bad that I remember a bad condition on delivery. I got this to replace the oven and counters on one side in my house kitchen. It gives me a little more room between the two sides of my small kitchen. It is just about the same length as the 2 small counters and the oven were, with a nice open shelf on the bottom. I am now using some small cook tops, air fryers and a pizzazz to cook with since the old oven got stuck in the on position and caught some food on fire, could only turn it off by the breaker. It worked great for me, and I like it more than the old things that were there. While I was at it, I replaced the broken microwave with a hood in it above the oven and put in a new hood so now I have a working hood. Weight is okay, easily moved with 2 people. Height is perfect for sitting and cooking for me. If you are under my height, I am 5'9", it may be too tall for you to sit at. I believe it is about 32 inches tall, about 2 inches shorter than the old counter tops. It does have a 2 or 3 inch back plate on it and that makes it about 34 inches on the back. I was able to assemble this by myself and had help getting it in place in the kitchen, would be better to assemble in place if you do not have help, my brother was putting things up in the kitchen while I was assembling this, so I assembled it in the dining room. It came with a plastic coating that you can remove. It wasn't too hard to remove but it had a tendency to tear. I was able to get large portions of it off without tearing it. Very easy to clean, I usually use clorox or lysol cleaning wipes. I like the stainless-steel look, if you don't then why are you looking for one? It matches our fridge which is right next to it.

I'm not sure what the other reviewers are complaining about in regards to pulling off the wrapping. I didn't have any issue with that as I moved slowly and thoroughly, and it came right off. My table DID arrive bent and scratched on the backsplash but since I have ordered the shelving unit that goes with this, and it will be against a wall, it's not a huge deal for me. ** So to the manufacturer, use threaded paper tape which is stronger than the packing tape you have used and use more Styrofoam. The box I received had all of the pieces stacked on top of one another with no protection in-between to keep them from scratching one another. The tape used to seal the package isn't strong enough against the weight of the product in shipping**

We bought this table to put our outdoor pizza oven on. It seems well made and went together easily. You only need one Allen wrench to assemble it in a matter of minutes. The top is completely stainless, however be aware that the legs and lower shelf are galvanized. Hopefully this will last outdoors. I love that the top has a small backsplash lip to prevent the pizza oven from sliding off. The shelf is movable up and down to accommodate whatever you need. We put the propane tank on it and it seems very sturdy. All in all, this table is going exactly what we need. I’d recommend.

La mesa en verdad es de calidad