Rev-A-Shelf Heavy-Duty Stand Mixer Lift for Kitchen Base Cabinets with Soft-Close, Zinc - Spring-Loaded Lifting System for Small Countertop Appliance Storage, RAS-ML-HDSC

We love this soft close mixer lift! We did have to modify a cabinet (which is why there is no door currently). The instruction video made installation really easy. We cut 1.5" butcher block and stained to match our counters. The mixer stays plugged in by a smart outlet. We did need to go up to level 3 on the tension spring, super simple to change. The clip for the soft close was a little tricky (you need to install all 4, but the video shows only 2). Overall, we love it!

I bought this shelf as part of my wife’s Christmas gifts. She loved it, but the process to mount it was arduous. If I was a handyman, I would charge $100+ to install it if there was proper support (studs) in place. If not, probably $300+. The lift is great! My wife has used it for a couple months now and even with thick dough, it doesn’t move. Soft close is a must, for your convenience and safety. As far as installation goes, my wife and I’s home had “handyman” cabinets installed by the prior owner. In short, there was not sufficient support to hold 60lbs, plus the weight of the shelf itself, 30lbs… about 90lbs total. So I had to build a cabinet to insert into the cabinet space. This was arduous but imperative. This was in addition to building the wood base for the mixer to sit on, which was not included. I bought a nice piece of poplar, which I cut, glued and then affixed to a piece of 3/4” plywood for added support. Do a little research. You maybe able to order a butcher block or use a high density plastic cutting board. Whatever your style. I should mention. I didn’t trust the screws that came with the shelf, so I bought some bolts, as well as a heavy duty gate handle to help lift. I love the result (and my wife’s reaction was worth it). It blends perfectly with the original wood cabinets, but it was a lot of work. Mounting the shelf itself took a couple of hours. But know this: INCREASING THE TENSION IS INCREDIBLY DANGEROUS AND SHOULD BE DONE WITH TWO PEOPLE. They included a picture of one person pulling back on the tension rod, constantly while they also removed the tension screw. I tried this, and the spring snapped like a bear trap. I could have EASILY lost a finger. My solution? Use a 1” thick hollow pipe that’s 12” or more. Insert the tension pull into pipe and use that added torque to adjust it to 60lbs. I did this myself, but I highly recommend 2 people. You can do this! Just be sure to give yourself 5-10x more time than you THINK you’ll need! Be safe!

Likes : Very robust construction Easy instructions Performs as advertised Great use of space. You need to provide the platform to hold the mixer. I was able to cutdown a VIKING cutting board matching the rest of the kitchen. I researched several of these before purchase. It has highest capacity with 3 different load settings to choose from. Dislikes: Contrary to instructions... it does not take 45 minutes to install. More like 4 hours if you dont have spacers and platform prefabricated. You will need to provide side spacing material to flush up the sides before mounting. Fortunately I could use the matching finish shelving I removed from this space to install the lift.

First, 1 star deducted because of two significant issues: a) the directions need significant improvement: - inconsistent between what's on the internet and what arrives in the box - lack a number of critical dimensions in the technical drawings; I had to scan it at a high resolution and then using the scale of that drawing, estimate other dimensions that I needed to know - the drawings themselves are too small; I'm not sure if the manufacturer is trying to save paper but those drawings need to be a full page each instead of <1/4 - they fail to warn you about critical issues such as corner blocks and hinges in your cabinet, that might get in the way; the video online shows a piece-of-cake installation because the cabinet itself is unfinished and sitting out in the open; of course that is not at all real world Even the standard installation is not an easy one (mine under a drawer is a lot harder) and (both) would benefit much more detailed instructions and dimensions than are given. (b) the left support, the spring-loaded mechanism that is supposed to pull the latch into the locked position is binding. It does not reliably pull the latch into the locked position. It is a construction flaw that could also cause a significant safety issue by allowing the loaded shelf to fall. I should probably deduct 2 full stars, however they earned a little bit of credit by having a technical person reply within 1 business day to an email with some helpful information. The rest of my review is best understood by viewing the video and the series of pictures. At completion, the lift is working correctly except for the issue noted above, even though it is loaded with a very heavy shelf and a very heavy mixer. The total weight of both combined is a little over 50 lb. You have to adjust the tension setting to account for this of course, but it is working correctly. The soft-close mechanism handles even that much weight. This could be used for other kitchen appliances like a bread-maker, slow-cooker, etc. that might otherwise not be used very often because they hide down in a cabinet.

My wife loves her new mixer shelf and shows it to everyone! I had my cabinet maker install it when he was building the cabinets. It works great! Very easy to lift up and even easier to lower into the cabinet. We had a heavy Kitchenaid mixer. We had it on nstalled when it raises up it is counter height. We had to sacrifice the drawer above it. We had the cabinet built with a false drawer front so when closed it appears there is a drawer there. Ithe closing mechanism is adjusted so all you we have to do is pull the handles to release it and it gently lowers into place. There was enough room under it for a small pull out shelf to hold the mixer attachments. It isn’t cheap but we found it worth it to easily keep the mixer in the cabinet and not have to struggle to get it out to use it.

The item was definitely a heavy duty part. There were no instructions included, and the screws provided were definitely subpar. But the rev a shelf was delivered quickly unfortunately I ordered soft close and that’s not what I got. All in all it looked like it would do the job for my professional Kincaid mixer.

Installed for a friend who loves to bake but has significant arthritis in her hands. Lifting her mixer had become too difficult for her. This solved that problem (and I enjoyed some excellent cookies). Fairly priced, arrived as promptly. Installation went smoothly because I checked YouTube for some related videos before installing and read the instructions. Note - it did require more vertical space than I initially realized. I had to remove the drawer above the cabinet but there was enough space underneath to install a full extension pull out. I attached the drawer front to the cabinet door. Looks perfect. My friend is very satisfied.

Not hard to install, and definitely an awesome product. My mother had one installed at her home a year or so ago and loves how easy it is on her back. When my wife became pregnant, I installed this in a kitchen island I made for her, so that she wouldn't have to strain to use her mixer (aka- could still cook for me). Everything works as it should and the soft close feature is wonderful.

This product saves all the lifting etc with our kitchen aid stand mixer! Soft close feature is wonderful. This is an expensive item but worth every penny!!

Love how easy it makes baking.

This is very useful. It is great as storage and easy to use

The unit arrived in a very timely manner. There was one problem so I contacted the manufacturer directly. A replacement part was couriered to me immediately. The appliance lifter is now installed. Works as advertised.

Great product! Very easy to use. Highly recommend.