HT206D AC/DC Clamp Meter

🧪 First Look Picked this up for site checks and van-side diagnostics—wanted something that handles AC/DC current, voltage, and continuity without dragging out a full bench setup. Straight out the box, it’s lightweight but feels solid. The clamp opens wide enough for chunky cables, and the LCD backlight is crisp even in low light. Auto-ranging works well—no fiddling with manual settings. Tested it on 12V van circuits, mains sockets, and a few battery packs. Readings were fast and consistent. The NCV (non-contact voltage) feature is handy for quick live checks—no need to probe. 🧰 Real-World Use ✅ Used for fault tracing, continuity checks, and voltage reads—no drama ✅ Clamp handles thick cables—tested on 10mm² and up ✅ Backlit screen easy to read in dim corners or under dashboards ✅ Temperature probe included—tested it on a heater core, worked fine ✅ Duty cycle and frequency modes useful for deeper diagnostics Also tested the resistance and diode modes—clean results, no bounce. Battery life’s solid, and the auto-off feature saves juice. Comes with a pouch, leads, and probe—ready to roll out of the box. 👍 Pros ✅ 600A AC/DC clamp—covers most site and van needs ✅ 6000 count display—precise readings ✅ Auto-range—no manual faff ✅ NCV detection—quick live wire check ✅ Backlit LCD—clear in low light ✅ Includes temp probe, leads, and carry pouch 👎 Cons ❌ Clamp doesn’t measure DC current—AC only via clamp ❌ No true RMS—watch for accuracy on variable loads ❌ Plastic feels light—fine for daily use, but not ultra rugged ❌ No magnetic strap or stand—needs flat surface or hand hold 🧭 Final Verdict If you want a clamp meter that’s accurate, compact, and built for real-world diagnostics, the HT206D earns its spot. I’ve tested it across van electrics, site gear, and home circuits—no drama, just clean readings and proper features. Good stash-ready kit for anyone who wants their testing sorted without the faff.

I have mostly Fluke multi-meters, my oldest and the one I still use most is over 35 years old and still works perfectly. Before I retired I could justify £350 plus for each of these and they have paid for themselves many times over. But now when I needed an amp-clamp to check the integrity of glow plug circuits on my motor-home I had the choice of another new Fluke, to get a auto electrician in, or to buy this meter. Two of these options were very expensive one was not. Guess which one I chose. The manufacturing quality of this meter is not great but the cost was so low that had it only lasted one job it would have been worth it, although I do not as rule advocate buying to throw away. Actually I have used it a lot, partly because its small size makes it easy to get the amp clamp in small spaces. It is nowhere near as substantial as a Fluke but its not a twentieth of the price. So there has to be compromises somewhere. The plastic is quite flimsy and I assume the electronic components are probably not grade 1. As someone who regularly used to drop his meters off buildings and into running engines I don't believe it would stand up to heavy usage simply because its not armoured in the same way. And again because of the thinner plastics I would be wary of using it on higher amperage's,. But so far not only has it worked but it has worked well. So if you do not need a professional grade instrument that actually requires significant investment then I have no reason not to recommend this item.

Thought I’d share a review on the clamp meter , purchased this for my work, it’s not bad , pretty accurate, good for checking cranking amps and volts , instead of guess changing expensive parts and hoping for the best , including checking parasitic draw from the battery, there is more expensive ones out there - fluke ect but this is good for the money

Handy when the battery fails in my main meter - seems absolutely fine and accurate. Like it.

Did the job I got it for.

Very impressed, really like the auto range setting, compact, easy to use and accurate read out, the extra light function is perfect for locating wire in a dark control panel. Highly recommend and great value.

The KAIWEETS Clamp Meter HT206D has a surprisingly rugged feel. It's fairly heavy and does a wide range of measurements. It is autoranging, which I like because I don't have to set a range of amps before using it. I've used it to check the current being drawn through a cable and it worked as expected. The letters on the screen are clear and it is well backlit. It comes with 2 x AAA batteries, but I put my own Duracell ones in because I prefer that make. The clamp meter comes in a black nylon cloth case - not sure how long that will last as it's not padded. The cardboard box it came in is strong though so I'll keep it in that! It's easy to use, but there are instructions if needed. I can't believe how cheaply they make these things and I'd recommend this for any keen amateur DIY-er for checking car battery condition etc.

Good price for a basic Clamp meter perfect for home use.

Stämmer i mätvärden på spänning o ström mätning. Bra pris.

Excellent product Excellent service arrived in 2 days of purchase

Ottima pinza amperometrica, di piccole dimensioni, facile da usare. In automatico è leggermente piu lenta. Le misurazioni sono precise e affidabili.

Very nice and handy little multimeter! It seems to measure very accurately. Unfortunately, I missed that some cheaper clamp meters do not measure DC Amps. Only AC Amps. But both DC and AC volts. Otherwise very satisfied with it.

Produit de bonne qualité livré avec deux sondes et un manuel assez bien détaillé (suffisamment bien décrit pour comprendre sans problème les différents fonctions). Le boitier est assez petit ce qui est pratique pour tenir dans la main. Il m'a l'air assez robuste et de bonne facture. On peut également tourner la molette d'une seule main pour passer d'une fonction à l'autre. Je l'ai utilisé à plusieurs reprises et ça donne de bons résultats. Dans mon cas je l'ai utilisé pour mesuré un courant alternatif (avec la pince), tension continue et alternative. Cet appareil m'a déjà permis d'identifier et réparer deux pannes sur des appareils en panne (et ça m'a permis d'économiser plusieurs centaines d'euros en ne changeant que le composant en panne). Je recommande pour un usage occasionnel / non intensif.