Rubio Monocoat Wood Stain & Finish 650 ft² - Natural | Oil Plus 2C | Quick-Dry, Eco-Friendly Linseed Wood Oil for Indoor Use, Includes Accelerator (Part B) | Protector | 1.3 L

Just like most everyone else has said, this product was great! Went on so easy with a rag and I followed with a white scrub pad. Perfect finish with a matt sheen and very even. I pre stained with intense black and followed the instructions exactly, including using the recommended wood cleaner step. It does have an odor, although not terrible, but it has lasted a week already so just be aware the finished product will need time for it to dissipate. I was nervous to take on the project as a complete novice, but it came out great and i saved big $$$ compared to estimates I received from pros. My fireplace mantel came out great and I get so many compliments, I may have to do more woodworking now!!

Almost impossible to screw up, just make sure your surface is clean. I didn’t use the Rubio wood cleaner beforehand (budget…), but used acetone as an alternative to clean the surface ahead of time as they suggest. Once I was sure there was no dust (swipe with a black nitrile glove), I went to town. Used this for a walnut veneer media cabinet with curly maple overlays. My first solo built cabinet and I’m thrilled with the result. Such a time saver too, no scuffing and recoating over and over. Not sure I’d use this finish on a coffee or dining table, but for this low-traffic/use peice it’s perfect. One coat. Some people swear by two coats for walnut, but it was too shiny for my liking in a test piece. Also, as others note, the stuff smells friggin amazing.

I’ll always be a Rubio fan. It’s easy to apply, forgiving, and durable. While it’s expensive, it goes a long way due to the single application. I do like using a scraper for this but have also used towels and rags to apply it, which works well too. Over time, the cap to Part B can get sticky, so I’d recommend cleaning the threads on that after each use.

I’ve been using Rubio Monocoat regularly, and it has quickly become one of my go-to finishes. It’s easy to apply, dries quickly, and the walnut color gives wood a beautiful, natural look that really enhances the grain. The finish is durable and holds up well over time, which makes it great for both small projects and larger pieces. I also appreciate that it’s eco-friendly compared to traditional stains. A bit more expensive than some options, but the quality and results are worth it.

Excellent finish. Food safe and fairly durable. Easy to apply and buff. I left the countertop un-touched for 1 week. Liquid beads right up. No grain raising. I used it on a teak butcher block style countertop. The "pure" brought out the color I was looking for. Only 2 complaints (hence the 4 stars), one was the instructions were way too small. Had to use my phone as a magnifier...ugh. A link to a PDF would fix that. The other was that no whee in the instructions does it say not to pour the part B into the part A can. Here in the states, its customary to always mix 2 part mixes in the larger can. DON'T DO IT! So that was an issue. I was able to salvage enough for my project. It reminds me of what we called "hardening oil" back in the day ('60s) that we would mix up. Not food safe chemicals though...lol Other than those two minor issues, I'll be using this from now on as needed. Highly recommend. Remember, this is a "treatment" to protect the wood from liquid and stains. It is NOT a "finish" (like a poly) that puts a protective layer on top of the wood.

We used Rubio Monocoat Oil plus 2c (pure) on our Acacia Wood Butcher Block kitchen counters. It was the natural look I wanted without the sheen and plastic look you get from polys. It was easy to apply and the product went far! It took about half a 350ml kitchen to cover over 32' of counters. We only applied one coat. First few pics show before and after. We were pretty careful about not letting spills on it for long. A year later we had just 2 marks (also pictured). We lightly sanded them down and applied another coat, again supper easy. Last Pic is a year later with the second coat. Marks sanded out and are gone. We love our counters and recommend this product! Smell is actually pleasant as well!

Just coming back on here to say I’m still so impressed with durability and appearance of the finish. Two years in and my heavily used oak butcherblock island still looks fantastic. When I say heavily used, I really mean it - it gets out through the rigors of running a professional cake design business and a family kitchen where every meal is made from scratch. Sourdough, food coloring, dirt covered vegetables from the garden, jam making, pizza dough - the lot. Absolutely brilliant product. We've done several kitchen remodels in the past and have always used IKEA's Behandla on our butcherblock countertops. Sadly that product has been discontinued and its replacement, Stockaryd, is not the same thing at all. It is just Tung oil, which sinks into the wood but provides no barrier whatsoever - the second you use even just a damp cloth on it, the wood grain rises up and becomes rough again. With Behandla I could empty a bottle of food coloring on my butcherblock and it would wipe right off, leaving no stains at all! So disappointed. Next I tried a butchblock conditioning cream which added beeswax into the finish, supposedly for enhanced water resistance and durability. That was a fail too, so then I added a layer of the same company's Wax It All, hoping that the extra wax would be deal clincher. I didn't wash it for a week, and the first time I took a damp cloth to it, not only did the grain rise up immediately but it left a huge white patch in the finish. There wasn't even any cleaner on the cloth, just water. In desperation I searched the web for a better solution and came across Rubio Monocoat. As a cake decorator who works from home, I need a product that has food safety certification, but I didn't want to use a polyurethane because of the risk of flaking and the lack of ability to do spot repairs, not to mention the horrible chemicals. Rubio Monocoat sounded almost too good to be true but after reading lots of reviews and educating myself on their website about how it actually works, I was ready to give it a go. The biggest part of the job for me was prepping the countertops, as I had to sand them right back down to bare wood. If you have new, untreated butcherblock, you will breeze through this process! The packaging truly sucks (how are you meant to separate the two tins?!) and the instructions are printed so small that I couldn't read them even with glasses on! However the website is very informative and tells you everything you need to know. As promised, the butcherblock was touch-dry at the end of the buffing process and the smell from the linseed oil was very minor and not unpleasant - no VOCs!. The next day we started to put plates etc on the counter but did no food prep or anything that would require cleaning on it, as you have to keep it dry for five days in order for the oil to cure. At the end of five days, I cleaned it down with a damp cloth and was thrilled that it stayed smooth as glass. I put it to the ultimate test, slapping dough on to it and making pizza last night, and it came through with flying colors. Scraped up the excess dough, washed it down, and the countertop is still good as new. Thank God - have finally found a replacement for Behandla! Don't waste your time on oils - they might work for a butcherblock chopping board or a wooden salad bowl, but they don't work for a countertop that needs cleaning daily. This product is natural, food safe and actually does what it says on the tin! Their customer service is also very good. They have a chat on the website which is actually a human being and not a bot. They answered a couple of questions I had and were very honest, clarifying which of their maintenance products had food safety certification and which didn't - it would have been very easy for them to just say they all did, but they were very specific, which I really appreciated. All in all, five stars!

If I could give this product 10 stars- I would. Was extremely easy to use. It has minimal to no odor at all. I purchased the shell gray stain with accelerator to use on birch butcher block countertops. If you follow the exact directions provided on the manufacturer’s website you can’t mess up. I combined the 2 bottles in a cup, mixed well. Used the plastic scrapers to apply even coat of the product all over the surface. Make sure you work with smaller areas. Spread the product; wait 5-ish minutes and buff it off. Used a sponge brush for crafts to coat the edges then wiped those after 5 mins. I used the blue shop towels to buff off any excess product. Application wasn’t messy and it was extremely easy to work with. After buffing off excess, it took about 45mins-1 hour for the butcher blocks to feel dry to touch. The stain dries to matte finish. I purchased the small bottle+ (130ml) and that was enough to finish an 8ft x 2ft + 2x 4ft x 2ft slabs of butcher block. The color of the stain came out a bit darker than what was shown on the pictures provided with the product- but I did expect it to vary, considering my butcher blocks aren’t made of oak wood as the sample in the picture is. Mine came out darker than shown, and I’m very happy that was the case. Reason why I picked this product is 1) because of its fast curing time. The counters should be fully cured in 5-7 days. Ready for installing and light use after 2 days. 2) huge upside- it only needs re-seasoning every 5 years. 3) does great to protect counters from staining. And it’s virtually completely water proof. This was extremely important since I’ll be using them in my kitchen. All in all- perfect product- fast cure time- easy to use.

Das ist die perfekte Ansatz für eine Massiv-Holz-Küchenplatte. Denn ich bin total überzeugt davon. Denn es ist so einfach die Platte ein zu ölen , warten zu lassen, mit einem Baumwolllappen nach einer Zeit der Sättigung ges Öles , das überschüssige Öl wieder mit dem Tuch aufzunehmen undf alles für einen ganzen Tag einziehen zu lassen und zum Schluss nochmals drüber mit einem weichen Tuch und man hat die perfekte Küchenarbeitsplatte, die 80Grad locker abhalten kann. Danke für dieses tolle Produkt.

Easy to apply and clean off on finished wood. Bring out the wood grains.

Top qualité. Le résultat est à la hauteur de mes attentes

Marangozumun tavsiyesi üzerine mutfak tezgahlarım için aldım. Önceden üzerinde vernik vardı. İstemediğimiz bir görüntü ve dokuya büründü. Verniği kazıdık, zımparaladık ve bu yağı uyguladık. Sonuç muhteşem oldu.

Thanks ❤️❤️❤️