Turning Point Propellers 11500100 MasterGuard Hub System-501,Black Black
Product ID: 208073026
Buy anything from 5,000+ international stores. One checkout price. No surprise fees. Join 2M+ shoppers on Desertcart.
Desertcart purchases this item on your behalf and handles shipping, customs, and support to USA.
Replace your propeller housing with Turning Point's 11500100 Master Guard Hub System Installation Kit #501 with 15-Tooth Spline Hub. This kit is compatible with Hustler and Express Series Propellers for select Force, Honda, and Suzuki & Johnson 40-150hp 15-spline shaft engines with a 4. 25" gear case. It is also compatible with Hustler and Express Series Propellers for select Mercury & Mariner and Mercruiser 90-300+hp 15-spline shaft engines with a 4. 75" gear case. Turning Point is the only company to offer Master Guard Installation kits and prop housings for 6-300+hp engines with a Lifetime Hub. Boaters save up to 38% when buying a replacement propeller housing. Master Guard hubs are Re-useable most of the time after a prop strike, and if not. These hubs offer enhanced lower unit protection. Turning Point's Master Guard Hubs are engineered to withstand typical wear and tear over time without risk of spinning or failure under normal operational use. Turning Point's unique patented one piece hub with glass filled nylon over durable marine bronze splines eliminates failures commonly seen in multi-part "sleeve and spline" designs, and pressed-in rubber hub systems. Covered by US Patent #6, 471, 481, #6, 685, 432, #7, 717, 678 and worldwide patents with additional patents pending. Refer to manufacturer recommendations to ensure a proper fit before purchasing. Review: Easy to install and well made. - Very easy to install on my 2000 Bayliner Capri 1950 CL with mercruiser 3.0L Sterndrive. Haven't tried it out in the water yet but looks solid and hope it will help prevent damage to my new propeller. I went with this 14 dia. X 19P which was recommended by the TP wizard online. Will update this review when I take the boat out next month. Quicksilver 822777Q1 Aluminum Trim Tab Anode - Mercury or Mariner Outboards and MerCruiser Stern Drives Using High Rake Propellers https://www.desertcart.com/dp/B000RZSJJ2/ref=cm_sw_r_cp_apa_fabc_Tya3FbJYA39K6?_encoding=UTF8&psc=1 Turning Point Propellers 21501930 Hustler Aluminum Propeller 4-Blade, Black https://www.desertcart.com/dp/B003MF0GJ0/ref=cm_sw_r_cp_apa_fabc_xAa3FbWAVJZY4?_encoding=UTF8&psc=1 Review: quality - best pricing i could find and item worked great, good quality
R**O
Easy to install and well made.
Very easy to install on my 2000 Bayliner Capri 1950 CL with mercruiser 3.0L Sterndrive. Haven't tried it out in the water yet but looks solid and hope it will help prevent damage to my new propeller. I went with this 14 dia. X 19P which was recommended by the TP wizard online. Will update this review when I take the boat out next month. Quicksilver 822777Q1 Aluminum Trim Tab Anode - Mercury or Mariner Outboards and MerCruiser Stern Drives Using High Rake Propellers https://www.amazon.com/dp/B000RZSJJ2/ref=cm_sw_r_cp_apa_fabc_Tya3FbJYA39K6?_encoding=UTF8&psc=1 Turning Point Propellers 21501930 Hustler Aluminum Propeller 4-Blade, Black https://www.amazon.com/dp/B003MF0GJ0/ref=cm_sw_r_cp_apa_fabc_xAa3FbWAVJZY4?_encoding=UTF8&psc=1
A**R
quality
best pricing i could find and item worked great, good quality
T**R
Great Quality!
Bought this hub to go with one of their props. You can definitely tell the difference between Turning Points hub quality and others that are out there. Turning Points actually weigh something and install very easily!
A**R
Great fit with Turning Point prop
Fit my Turning Point prop perfectly & actually arrived a day early.
J**J
Great hub but I got a defective prop nut....
This is a 5 star hub and it would have got 5 stars had the prop nut not come with a super weird defect. I could fit my 1-1/16th and 27mm sockets (same size for all intents and purposes) on from the bottom of the nut but the top of the nut bulges just enough to make it impossible to put a socket on it which is problematic given that this is a nylon lock nut which can only be installed one way and it bulging from the top makes it impossible to tighten. Luckily my oem nut will work just fine but I was really hoping to have an extra nut afterwards in case I do something stupid like drop the nut while working on the boat in the water. Other than that the hub is great. Slapped hub in. Put thrust washer behind it and gave it a couple whacks with a rubber mallet so the thrust washer would seat flush, put some grease on shaft, plopped prop on, put gear looking washer on followed by pronged washer and lastly the prop nut, tighten to 55ft-lbs, bend 3 tab back on pronged washer into slots in gear washer. Easy peasy. Would have been even easier had the nut they included worked the first time around but other than that I have no complaints.
D**D
Needed for new prop, fit well, well made
Expensive adapter, but it should be buy once and reuse when installing new props in the future. Well made, fit correctly, easy install.
B**5
Works Great
This hub kit is easy to install. If you haven’t changed a hub and prop before this hub kit comes with instructions.
E**S
Rattles at idle
Bought this hub kit with a turning point stainless prop, it rattled like crazy at idle. The prop was almost 2x as heavy as the oem prop in the same material. There is no magic bullet, just buy the right pitch oem prop and be done.
Trustpilot
2 days ago
2 weeks ago