Outdoor Indoor Waterproof 12VDC 24VDC 600lbs Holding Force Magnetic Door Lock with Z and L Brackets for Access Control Door and Gate Opener, Fail Safe Electromagnetic Door Lock Gate Lock

Very good no issues here pretty simple set up .went quick works well

funciona genial, deben realizar chequeo general en cables y listo

Solid product, with some small improvements.

Instructions a little baffling but if you tinker enough it works well. Angles of the magnet and strike plate but be spot on

I purchased the Supreform E-lock/Maglock for my Elite Miracle One (EM1) gate opener. Initially, I had trouble of figuring out how to wire it, none of the configuration diagrams provided would work for my EM1. I measured the output of my EM1 Maglock (connector pin 2 & 3) and got only 10-12 VDC at the beginning of each open. I contacted the Supreform manufacture and asked them if I can use the 12 V Relay and wire to my EM1 using 24V Relay’s diagram. They replied with a “YES”. It works great after all of the troubles because not enough information. Great product, very low price, comes with two relays (12V & 24V), all needed mounting brackets, very lightweight, low power consumption, does not need extra power supply, connect directly to the 24V battery and they provide great support.

Due to occasional strong winds, gate was pushed opened sometimes. Now, with the maglock in place, it seems to Hodor - hold the door. For those who ask why it's outdoor/rain friendly. The internal electronics is covered in black resin. And as for the small hole where the connection cables come out - just use some sillicobe or an ear plug to fill it (although, unnecessary)

Needed a gate holder for the automatic gate, mainly do to wind amd the dogs able to pry the gate open amd roam. very easy to install once you understand what application/brackets you need. Couldn't be happier with my purchase.

I install these to stop shoplifters. The magnetic locks work flawlessly. The magnet is strong enough to hold the door closed preventing entry or exit. The only downside is the included hardware. The machine screws included in the hardware bag are not worth using. The bolts for the stainless steel plate tend to be troublesome and strip. The noted problems are also found in other lock manufacturers. I can not say anything is bad about these manufacturers.