383EER4004A 383EER4001A Washer Inner Outer Spring Expansion Tool Max 4.65" | Washing Machine Door Boot Seal Spring Clamp Removal Tool for LG, Samsung, Whirlpool, Kenmore 4986ER0004F/B/G Washer Door Boot

This tool is a life saver! The spring fell off our LG washing machine a day before Christmas Eve. Wife and I spent about 2 hours trying to get it back on, after watching several YouTube videos. Very frustrating, just kept popping off. There was a link to this item in one of the videos so I ordered it, arrived the next day around noon. Took less than 10 seconds to get it back using this tool! I think it took longer to open the package it came in. I was a little weary about ordering it at first, since Amazon says it's a frequently returned item, I thought maybe that's because it doesn't work well. But it worked great for us, maybe people use it once and return it because they don't need it anymore. But for about ten dollars I'm definitely keeping it so I'll be ready if the spring falls off again or need a new one.

I had to replace the drain pump on my sister’s all-in-one LG front load washer dryer. This repair involved removing the front panel of the appliance, which wasn’t hard using the tools on hand. When I tried reinstalling the retainer ring for the door gasket I could not expand the spring enough to seat the ring over the gasket flange. (I have arthritis.) I ordered this plier and it was a big help installing the retainer ring quickly. The plier looks and feels to be well made and has a notch in each tip to keep the tool from slipping off the spring eyelets. The con: it was hard to release the notches because they fit snuggly in the spring eyelets. I used a flat blade screwdriver to hold a spring eyelet in place while removing one side of the tool. Then the other side came right out. This tool will be a big help for future repairs and I can actually think of a few other uses for it. I do recommend this tool if you’re a DIYer looking to save on the cost of appliance repairs.

Makes the job easier for less than $10.

Could use a bit more pep in its spring, but it is adequate to the purpose. This wasn't made to the tightest tolerances or the cleanest of manufacture, that being said, it does the job well, and will continue to do so in the future.

Well made But did work as advertised for my machine as the pliers convene go the distance required to fully expand the spring

I purchased this Washer Spring Expansion Tool to replace the door boot seal spring clamp, but it did not work for my Maytag washing machine. While the carbon steel build and the rubber grip handles feel sturdy enough, the overall design and spacing are not universal. The tips did not align or grip the spring rings properly on my specific model, making it completely useless for the job. If you own a Maytag unit, I would look for a different tool specifically tailored to that brand instead of relying on this one.

Used these on my LG WH3500. If you got your seal here you already saved a ton of money, spend a tiny bit on these and save yourself a ton of time and hassle! This is the tool that made the job super easy. This is probably the only time I will perform this operation, but for 10.00 they were worth every penny in the work they saved me vs trying to do it without them. They are high quality steel with comfortable grips. Very ergonomic, and they have convenient grooves to hold the spring rings cut in the tips. Highly recommend!

This tool works well on the outer boot spring clamp of the LG front loading washer but unfortunately it does not work well on the inner boot spring clamp. I don't know why LG made the two boot spring clamps differently. The outer spring clamp has an extension spring fit into the wire clamp that has loops at the end that actually fit the tips of the clamp expansion tool very well. The inner boot clamp is a completely different story, the clamp had a loop and hook on one end of the spring clamp and just a loop on the other end of the spring. The two opposing clamp loops on the inner spring boot clamp are too far from one another to use the tool to expand the clamp spring using the clamp loops and the tool's tips are too big to fit into the loops of the spring (not the loops of the wire clamp, the loops of the spring) and allow the wire clamp hook and loop ends to fit in at the same. I watched a video and the repair technician uses the LG spring compression tool with tips that are much thinner and offset at 90 degrees. The LG tool compresses the the clamp on one end of the inner boot clamp expanding the spring to one side instead of trying to stretch the spring at both ends where this tool doesn't have the reach or fit, like it does with the front outer boot clamp. In order to make this spring expansion tool work on the I had to modify the spring on the inner boot clamp and open the spring ends from closed loops to open hooks which weakens the clamp slightly. Both tools are needed because I don't see how the LG tool would work on the front outer boot spring clamp. It was really stupid for LG to make the inner and outer boot sprig clamps different from one another. Unfortunately I did not compare the diameter of both the inner and outer boot spring clamps to see if the inner clamp could be substituted with buying and using an extra outer boot spring clamp which costs only about $10 instead of buying the LG tool which costs almost $60.

I probably won't have to use these again for a long time, but they worked pretty well for the one job I needed them for. I saw a few different Mickey Mouse ways of getting the Washer Spring off but didn't want to go through all the hassle. This didn't make it insanely easy, still had to fight the spring a little to get the plyers to grab on but once you got a hold of the spring it comes right off no problem. Very well made product, will probably be the first and last one I purchase lol.

JUSTO LA HERRAMIENTA QUE NECESITABA, ME AHORRO MUCHISIMO TIEMPO EN LA REPARACION, BUENA CALIDAD DEL MATERIAL, RECOMIENDO SU COMPRA

Hat einwandfrei funktioniert. Wir haben damit den Spanndraht mit der Feder für die Türdichtung bei unsere Waschmaschine wieder spannen können. Die Zange ist stabil verarbeitet.

se si vuole montare una guarnizione alla lavatrice questo è la pinza che devi avere, buon brodotto consigliato

أنقذتني