Ford 6E7Z-9C082-A - KIT

Replaced factory HFCM (fuel pump) drain plug with this item. If you haven’t replaced yours yet, I suggest doing so soon. It’s just a matter of time before you’re going to have to. This product was a perfect replacement.

This a genuine Ford oem updated part. During my last scheduled fuel filter service I noticed how loose the original plug had become, usually these are a pain to remove with the Allen key, and it was actually not even threading back in since the corrosion had eaten through the threads. I'm lucky it didn't just fall out while going down the road. This plug is just what this system needed, it's a heavy duty brass plug with a modification to stop it from falling out while draining and they added the larger outside face for easy servicing. I have a 07 F250 4x4 and no absolutely no issues installing this with my front drive shaft installed. Took all of about 2 minutes to replace and we are back in business. (just watch out for the quart of diesel that pours out when your first remove it)

Ford 07, 6.0 diesels 4x4 have VERY LITTLE room to remove the drain plug to remove water in fuel. This solid brass replacement corrects this problem, and you don't need an allen wrench to tack it off and on. (just cut the "T" holder off the end and it will clear the drive shaft easily).

I love this thing,I can pop under my truck, drain the fuel water separator in a minute and be done.

Wow, what a simple product that will save time and money! After talking with a buddy who had to remove his entire fuel filter to drill out his stripped plug, I invested a few bucks to make sure I didn’t have the same issue. My old plug was internally corroded and just a matter of time before I had to do what my buddy did. With the knurl, no tools are needed and water can be drained in a matter of seconds. I highly recommend this simple solution to all 6.0 owners!

This part is high quality and fixed my leaky oem plug. On 4wd models it is easier to unbolt the front driveshaft for the 1 time install since the tee end makes it longer. Took me all of 10 minutes to install now in the future the plug won’t rot and will stay in the hole while draining.

beats oem plug for 2005 6.0 f250

The plug works great after I cut the brass T off the plug. I wasn’t able it install the plug with the T on and it just wouldn’t fit. I just used a hacksaw to remove the T.