The X-15 Stereo ribbon microphone houses two separate matched ribbon motors that are positioned one above the other. The elements are offset 90 degrees and are configured in the Blumlein setup. Stereo separation is superb and off-axis coloration is minimal. Add in the excellent sensitivity and frequency response range the X-15 is ready for the big leagues. The fit and finish are of top quality and includes a premium suspension shockmount, thick padded vinyl pouch and an upgraded aluminum case. A 5-pin cable is included, the cable connects to a metal splitter box where two separate XLR connectors give access the to upper and lower ribbon motors. Legendary symmetrical ribbon design is incorporated into the X-15. Unlike most ribbon motors designed today with an offset ribbon element the new Cascade X-15 houses two hand-tuned ribbon elements that incorporate the legendary symmetrical ribbon design. This design offers a true figure 8 pattern. The corrugated aluminum membrane itself is positioned in the center from front to back, thus producing a balanced audio input signal to both sides of the ribbon assembly. Specifications: Type: Ribbon (velocity) Microphone; Ribbon type & Dimensions: 99% Pure aluminum, 2.5 micron, 1 3/4" (L) X 3/16" (W); Polar pattern: Figure 8 Symmetrical design; Sensitivity: -51.7 dB +/- 2 dB (2.6 mV/Pa); Frequency response: 30 - 18,000 Hz (+/- 3dB); Output Impedance: <=200 Ohms; Recommended load impedance: >1000 Ohms; Max.SPL (1% THD @1000 Hz): 145 dB; Connector: Heavy gauge 5-Pin male XLR; Size: Diameter: 1 1/4" (O.D. grill), overall length 9 1/2", 1" (O.D. body). Includes: X-15 Stereo Ribbon Microphone, Aluminum case, Premium suspension shockmount, Thick padded vinyl pouch, Wind filter, 30ft. 5-Pin XLR cable, Metal splitter box, Micro-fiber cleaning cloth, Specifications and typical measurement report.
U**N
Excellent stereo ribbon for a very reasonable price
I previously owned a pair of Cascade Fat Head II with Lundahl transformers that I purchased to do stereo recording. The Fat Heads are nice, but it is a pain to set up the Blumlein bar and the mics weigh a lot.I purchased the X15L to replace the Fat Heads. I am very happy with the quality. I use CloudLifter CL-2 with the pair to raise the gain. The mic sets up quickly and is easy to place. The only hassle is finding the middle or the stereo pattern. I marked the top of the mic with a Sharpie and put a sticker on the from of the mic.
Trustpilot
1 week ago
1 month ago
