KILMAT 80 mil 18 sqft Car Sound Deadening Mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

This is a good product. Many people go with KILMAT because of the value to price point. I did as well. When you clean the surface (in my case it was all painted metal) this stuff sticks very well. I do recommend you use a seam roller of some type, I used Lumiteco 3 piece roller set. This will help with adhesion and mostly flatten the overlapped edges. It also helps you see where you have rolled as it leaves little grooves. The difference when we had no sound mats and after was very impressive. We haven't finished our install yet and it is quieter than when we had an interior in the van. There are thicker mats available in other brands, but this will work great for our van build, but this helps keep the weight down. It is quality material, just be careful when you are removing the backing, the edge of the foil face can cut you. I suggest you layout where you are installing the mat and cut to fit. From what I have read, you don't need to cover every inch in the vehicle, just spot install for a big difference. I chose to cover most surfaces to help keep sound out when we are sleeping in the van. We haven't finished putting the van yet, but we have driven it around and been very satisfied with this product.

Purchased these for a 2020 Lexus RX350 due to the hollow sound of the car doors when shutting. They sounded cheap. The mats are super sticky and I applied them when the doors were hot from sitting in the sun. They alubutyl sticks like crazy and the end result was perfect. Now I have solid sounding doors. Good quality product.

Easy to install in a vehicle! Helps keep the heat out as well as keeping it quieter inside my car. Self sticking to the inside of the roof without strong smelling adhesives. The quality of these pieces work very well in my vehicle!

I used this in my 2rd gen Cummins. I had always heard about the added weight and whatnot (not that it matters in a diesel truck), but it wasn't overly heavy to me. I did a crew cab truck with 1.5 boxes, so the coverage per box is solid. It's easy to work with and adheres very well. I can tell a big difference from the cab drone now vs before, also a lot less rattles and shakes. Very glad I decided to do it.

The product is good and contrary to some comments I read it was not a mess to install and went on very nicely. That said I placed on a 71 Baracudda and starting from a 71db I was able to drop that down to about 66 with two layers Kilmatt 80mil

I love this stuff. I use it alot. Sticks great Easy to use Molds super easy Really helps with sound. Great product. I wish I could get sponsored for this product on my projects..

This stuff is very high quality, very sticky, doesn’t stink, and gets the job done! Got rid of my annoying roof rattle from my 2 8” subwoofers. Man they really got this priced right and I still got enough left over to do another car/truck!! Buy this and don’t look back!

Amazing and high quality that sticks very well. Sound deadening is amazing with this, just make sure you use enough layers by doing the “knock” test. I had to use 4 layers inside the area near the wheel well because it was very hollow and this product solved the issue. Subwoofers in the trunk sound great and much more cleaner instead of ghetto trunk rattle.

Muy práctico fácil de instalar, fácil de cortar, tiene muy buen peso se aprecia de calidad, el adhesivo pega muy bien ya instalado le da fortaleza y cumple, muy recomendable

Ho acquistato il KILMAT da 2mm (pacco da 1,7 mq) per insonorizzare le portiere della mia Renault Clio 2 mentre sostituivo gli altoparlanti. Sapevo che su un'auto datata le lamiere tendono a vibrare molto con i bassi, e questo prodotto ha risolto il problema alla radice. Applicazione e Lavorabilità: Facilità d'uso: I fogli sono maneggevoli e si tagliano facilmente con un taglierino o forbici robuste. Il butile è morbido e non serve scaldarlo con la pistola termica (a meno che non faccia gelido fuori), aderisce subito fortissimo. Copertura: Con 1,7 mq sono riuscito a fare abbondantemente le due portiere anteriori (strato interno ed esterno) e mi è avanzato qualcosa per il portellone del bagagliaio dove ho il subwoofer. Indicatore visivo: La goffratura (la trama a quadratini) sull'alluminio è geniale: quando passi il rullino per farlo aderire, la trama si appiattisce. Così sai esattamente dove hai pressato bene e dove no. Risultati: La differenza è impressionante. Audio: I bassi delle mie nuove casse sono molto più "secchi" e precisi, perché l'energia non si disperde nel far tremare la portiera. Comfort: Quando chiudo la portiera ora si sente un rumore sordo ("Thud") da auto di lusso, invece del vecchio rumore di lamiera vuota ("Sbleng"). Anche in autostrada entra meno rumore dall'esterno. PRO: ✅ Rapporto Qualità/Prezzo: Costa decisamente meno dei marchi blasonati (come Dynamat) ma fa lo stesso identico lavoro. ✅ Nessun odore: Temevo che puzzasse di catrame o chimico, invece è assolutamente inodore, ottimo per l'abitacolo. ✅ Adesione: Una volta attaccato, non si stacca più. CONTRO: ❌ Bordi taglienti: L'alluminio è sottile ma tagliente come un rasoio sui bordi appena tagliati. Usate assolutamente i guanti durante la posa o vi ritroverete le mani piene di taglietti senza accorgervene. ❌ Rullino non incluso: Per applicarlo bene serve un rullino pressore (roller) che va comprato a parte, ma è indispensabile. Verdetto: Se state cambiando le casse all'auto, dovete prendere questo. È l'upgrade che fa la differenza tra un impianto amatoriale e uno che suona bene. Soldi spesi benissimo per il comfort acustico.

I purchased this for insulating both my door panels and the back of the door cards during my audio system install. I'm no expert, but this product was easy to cut, easy to install and had noticeable results. Road noise was reduced vastly, which was the main goal for this project.

Facilmente applicabile e modellabile.

Werkt goed & plakt goed. Doet wat het beloofd