6 inch Running Boards Compatible with 2015-2026 Ford F-150 SuperCrew Cab Pickup 4-Door & 2017-2026 Ford F-250 F-350 Super Duty Crew Cab Black Textured Aluminum Side Steps Nerf Bars

Great product! Very easy to install ( 30 mins ). Looks great

These running boards are easy to install; it took me 40 minutes and they fit perfectly. Excellent quality, very durable.

Perfect fit for my F150. Exactly as pictured, easily installed, great quality, all hardware included & great price.

This set of running boards was put on a 2023 F150 XLT Super Cab with 6.5 bed. Install was about as easy as it comes with everything fitting as it should. Looks are good and functionality is good with a nice wide area for foot placement.

I put these on my 2019 F-250 about 2 years ago and they’ve held up through more than I thought they would. They were very easy to install, no rust, and the fit was perfect. They do sit in the truck a little more then I like but I got use to it after a month.

Looks good, easy installation.

The key to this installation, on any vehicle, is to first loosen the silver nuts installed on the running boards. Do NOT remove the nuts, just loosen them so they can move. Once loosened, move each of the 6 bolts to roughly the position you thing they should be placed onto your truck. Next, take a bracket from the box, which has two openings to attach to the running board. The top "hole" on the bracket is actually a channel, slip the bracket under the nut you previously loosened and hand tighten, this is not the final tightening and you need to keep the bracket loose so it can be slid into the proper position later. Next, you need to loosen the nut that will connect to the bottom of the bracket, this is the most difficult part so follow closely and do this slowly. Take a thin screw driver and slip it into the running board channel that the nut and bolt is connected and use the screwdriver to pry the bottom of the bolt (which is really a square washer) up so you create friction between the top of the square washer and the running board channel. This will allow you to unscrew the bolt that was preinstalled into the running board without dropping the square washer into the channel (which is the problem everyone is having with this product). Then, while you continue upward pressure on the square washer, have a friend move the bracket so the bracket hole lines up with the square washer, insert the bolt you just removed down into the bracket and tighten it down into the square washer. Again, hand tight, not permanent. This was the hardest part of the install. Now, lay under your truck facing up and have someone place the running board onto your stomach. From there, you can maneuver the brackets so they align with the bolts that came with your truck. Next, inset the middle bracket onto the trucks bolts, place a washer, lock washer and a nut into each bolt that now has the bracket inserted into, and hand tighten. Do this for all three brackets. Now, move the running board left/right and in/out to get it into position and then tighten everything down. Boom, you're done. All in this install took me 45 minutes, but that included thinking through the process to make things work smoothly. You should be even faster if you follow the steps outlined here. Good luck!

Very good value for the money.