MUTUACTOR 2PCS Super Powerful Neodymium Cup Magnet with 1/4''-20 Male Threaded Stud,Φ1.26 115lb Vertical Pull-Force Non-Shattering Magnet Base with Nut and Washer for Lighting, Camera and DIY Bracket

Bought these to mount a backup camera and front bumper camera on my tow truck. Haven't installed the front bumper one but I installed my back up camera and this magnetic is incredibly strong and really difficult to remove. Recommend it 100%

I designed a magnetic pickup tool with one of these magnets inside. I used PVC pipe with PVC caps on both ends. The end with the magnet in it has been sanded much thinner than how it came. I made a little bracket and bolted the magnet to the bracket, then tied a string to the bracket so I could pull the magnet straight up and down with the string. I cut 6 inches off the PVC pipe and added a 45 degree angle at the top then put the 6 inch section back on that and a PVC cap on that end. I drilled a hole large enough for the string to pass thru below the 45 degree elboe. Now with a loop in the string I can reach out and pick stuff up and then pull the string to make it fall off of the end of the tube. Sure beats bending over to pick up nails and stuff off the ground. You're welcome.

These little guys worked out great, very strong too. Update, one of the magnets cracked inside the housing and pulled right out in pieces. Another magnet pulled right out of the housing.

The product does what it says... it is difficult to move once attached. It peel the paint off my iron fencing. Currently taken off the fencing and used to hold my smaller screwdrivers. It’s overkill but it keeps up with them.

Used to mount a paper towel rack so that it can attach vertically to the side of a steel shelf. Works well with no sliding.

Excellent Product, Excellent Prices, Excellent Quality, and Fast Shipping.

I used these to hold LED spotlights in my shop while working on cars etc. The threaded post was a little long but after removing some of the material it works great. Provides the ability to angle the light 360 degrees on a single axis. They can definitely hold the weight of a 1lb. LED spotlight on a STATIONARY vehicle. I don't know why they have an "Easy to Remove" Rate feature for a heavy duty magnet. It does take some force to break it away but that is also dependent on the amount of ferrous material to which it is attached.

The magnet does what it’s supposed to do just not for very heavy weight items must go with the bigger magnet