Gelid Solutions GC-Extreme 3.5g with Tooling - Thermal Conductive Paste for Heatsink | Maximum Thermal Conductivity | Easy Application | Not Corrosive.

So where do I begin 🤔 well first, let's look at the pics. They speak louder than words in this situation. When my custom gaming pc was built in 2019 I had idle temps in the mid 50's to low 60's. While gaming mid 70's. Well here in 2024, My pc started have major heat 🥵 🔥 spikes and just crash than shut down. As a gamer we all know that frustrating 😤 upsetting feeling all to well. I couldn't figure out what was going on. Thought I had a mobo going out, sensor issues, false reading from my software, outdated drivers. I mean, I was rocking my brain over what? What's going on with my PC? Which has never done that before. So I got on the internet like most PC owners do on Reddit. Googling everything trying to find out what this possibly is. Surely someone else has experienced the same, but much to my surprise. I couldn't find an answer. I even went as far as texting youtuber Techs to find out what could possibly be wrong with my pc, but with no response. All I kept getting on my google serched was,Make sure your fans are clean. Maybe ur fans when out, Make sure you're fans are facing the correct position for the intake and out take of your directional fans, Maybe it's your motherboard or GPU issues, check settings that you've previously done before the incident happened. Make sure your BIOS is updated. I mean,at this point you could imagine how fustrated I have become. I was so surprised there was no answers nowhere to be found to my problem. Well, I decided I'm going to tear my pc down and I'm going to re-thereal my CPU and my GPU. So with that in mind, I was on the next lookout for thermal paste. And I mean some good thermal paste. Because after all, this was my last resort. So after watching countless videos reading countless Reddit accounts on the best thermal paste out there on the market for hot temp CPU/GPUs that has a cooling agent that will cool your CPU to keep it at better temps. And I kept getting the same brand over and over again The Arctic 4. And for some reason, something told me. Don't go with that brand don't know why, but I kept looking,. so I continued to watch, Continue to read. And I found 1 video out of hundreds of videos that I have watched and found a thermal paste GC- EXTREME. And it was proven to be the best decision I made as far as my pc care. For me to have gotten such major results in the cooling side and proformance of my CPU and GPU, I was completely and utterly shocked. As you can tell in the pictures above my temperatures I was getting before I thermaled it and after I thermaled it. Even a video. And also I posted a picture of my results with the temperature only in the 40's after gaming for 2 1/2 hour run straight. So then I decided to do a major game night and I gamed for 12 hours straight and my temperatures only got to the 50s and this is no joke. This was so mind-blowing. I don't know how to feel about this one decision that changed my thought process on how vital it is to find the best thermal paste. In this vital situation popularity thermal paste has nothing to do with what is the most important. And it's only a brand name. I wanted something to actually work and achieve my expectations. Not something that was popular. Which would save you in the long run on expensive massive even in some cases, unnecessary cooling fans for your CPU. It is completely mind-blowing because ryzen as we all know runs crazy hot temperatures. And that's what I have is a full AMD pc build. So I will definitely say that if you build a pc. Or if you're just looking to redo your thermal paste, This should be your number 1 thought and anything that you do with your pc as far as pasting or you're just building PC this thermal paste will blow your mind. That is no joke. And I don't know why there is not many videos on this paste. Because this paste to me from my experience is mind blowing. I used Noctua paste In my first build and I thought that was good until I got a hold of this one. Don't get me wrong here, Noctua is amazing pc fan company which I have in my build, But this paste is amazing and I would not steer anybody wrong with a bad product. So with that being said, the pictures and videos speak louder than words. Take a look at the proof on how drastic the changes were. It's insane. If anything comes out of this review, I hope and pray that it helps someone who is looking for authentic genuine review on this product.

This stuff is the real deal. I don't know how it compares to some of the other more "extreme" TIM solution but it absolutely stomps AS5 in my comparison testing. I use the Corsair Hydro Series H110i GTX Cooling - After having trouble with my in warranty EVGA motherboard EVGA X99 Classified Intel Socket LGA 2011-3 with DDR4 2666Mhz Motherboard 151-HE-E999-KR which EVGA replaced without any fuss. I found myself having to redo the TIM on my Intel i7-5830k Intel Core i7-5930K Haswell-E 6-Core 3.5GHz LGA 2011-v3 140W Desktop Processor BX80648I75930K . The processor is overclocked to 4.5GHz just for reference. I had some Arctic Silver 5 that I had just purchased so I used that. It performed worse than the thermal pad that came with the Corsair coole. My temps were reaching upwards of 60C during gaming, and never went much below 45C at idle. I decided to buy into the hyper of Gelid Solutions GC-Extreme and purchased this. I prepared the surface of the CPU and the cooler the exact same way both times. ArcticClean steps 1 and 2, and then rubbing alcohol as a final cleaning with a micro fiber cloth. After running my CPU under load and idle conditions for the past 24 hours this TIM is already producing temps 10C or more under what I was getting with AS5. I used a large pea sized blob on the middle of my CPU (large because the i7-5830K is a bit bigger than a normal i7. The change was immediate and undeniable. It hasn't even had time to flow properly into all the surface imperfections and these temperature drops are already impressive. I'm absolutely 100% satisfied with my purchase, and there's still a lot left in the tube, I might replace the TIM on my video card as well. I've seen at least one review complaining about the price. I suppose compared to $6 for a tube of AS5 this could be considered "expensive". But you get a lot more in the tube, I would say there's probably enough for 10 or more applications in there (that's a guess). It outperforms AS5 in my humble little side by side. In my opinion this is a great value considering performance and the amount you actually get in the tube. I highly recommend this to anyone looking for a good TIM.

I just looked at the top of this page, and I was informed I bought this in November 30, 2015. Here is my 2019 review. You know, this "overclocking" idea has been around for a long time, but not before my time. I was doing it in the 1900s, LOL. Anyway, this paste is far, far better than the paste that I recommended to my website viewers... 2 decades ago in 1997. At the time I found out the Radio Shack part number for their ubiquitous white, gooey thermal paste. I STILL HAVE SOME. Anyway, the industry went complete bonkers about 15 years ago and the thermal paste wars began. Well, this paste is some good stuff. I bought it after reading a review by TechPowerUp, apparently in 2015. I was having issues with a Dell laptop, i7, with very poor cooling. To this day the issue is not resolved because I still have the laptop and it still overheats. All I know is that this thermal paste works well and my Dell laptop is a piece of garbage... small fan, poor heat pipes, small outlet vents. You can't fix stupid. I did some temperature tests back in the day, and this stuff works great. I just happened to look up some 2019 listings of the best thermal compounds. This Gelid is still hitting the top of the pack, and its cost is still very good. I would definitely recommend this and buy it again... but I have plenty more. I'm gonna wipe off the goop on an AMD Ryzen with its designated fan and try this instead. It's that good.

Great item. Fast delivery. Well packaged. Highly recommended. 100% good One of the best thermal paste I’ve used

Expérience avec GELID SOLUTIONS GC-Extreme 3.5g nouvelle version (paquet bleu) + backplate + vis sur processeur socket 1150 J'ai 2 supports ventilo avec attaches en plastique et je me suis aperçu que le contact n'était pas OK avec le cpu (mauvaise expérience aussi avec un vieux cpu AMD socket 939 grillé (car pas protection) à cause d'un support ventilo plastique fendu à cause de la chaleur et d'une position verticale), j'ai décidé de changer les vis plastiques par un backplate + des vis métal Avant : en idle 40-45 °C, en Full 100 °C Avec Gelid-Extrême nouveau modèle : en idle 27-35 °C, en Full 60°C Donc oui au niveau thermique, elle est super efficace. J'avais l'habitude d'étaler la pâte précédente car plus fluide, la Gelid-Extrême nouveau modèle est beaucoup plus épaisse : j'ai essayé de l'étaler avec ou sans l'applicateur mais le résultat est à peu près le même, après plusieurs tests, j'en mets beaucoup trop (d'autant plus que je peux serrer à fond le ventilo sur le proc) et je galère ensuite à l'enlever. Donc je suis revenu à la bonne vieille méthode, une boulette au milieu du proc. J'ai changé ma méthode d'étalage à cause de sa viscosité, du gaspillage engendré et de la fixation avec des vis métal, mais au final j'ai appris que mon proc pouvait monter à 100°C mais avec la Gelid-Extrême, il reste la plupart du temps à 60 °C. Bien sûr qu'une grosse partie du gain est dû au changement de fixation du ventilo mais les -15° à -18°C en idle prouve qu'elle est super efficace.

Resulta un poco espesa a la hora de aplicarla, pero considero que es una ventaja que ayuda a que no se esparrame y llegue donde no debe. Buena cantidad para el precio que tiene, la he usado en procesadores y en gráficas, con muy buen resultado. Los mejores resultados de temperatura, se notan a partir de las 48 horas, cuando la pasta ya se ha asentado. Un tubo da para varias aplicaciones, comprar pastas mas baratas, puede salir caro. No lo penséis, esta es de las mejores.

Ürün olması gerektiği gibi beklentiyi karşılıyor.

I used GC extreme because it was recommend to me and I'm thankful that i did. I used to hit TJ-Max on both my CPU and GPU as soon as i started playing RDR2 on my laptop. (With AC on at 25/26 degrees) I finally changed it's stock thermal paste after 3 months of use. Even though i don't play much, my stock thermal paste was almost dried out on GPU and CPU. Pros- 1. Very reasonably priced. 2. Works flawlessly 3. Non-Conductive 4. Much much better than stock thermal paste or the generic thermal paste these companies apply to our laptop in the name of "service". 5. Heavy games like RDR2 are showing temps under 85 degree Celsius without undervolting/disabling turbo boost, which was not the case for me previously on the stock thermal paste. Idle temp was around 30-40. I'm personally very satisfied. (with AC on at around 26 degree Celsius) Neutral- 1. Bit difficult to apply but good thermal pastes are generally thick and they are not easy to apply. I have also not done it before so, Kinda new experience for me. Cons None as of day 1. Things to note- 1. This is a day one review. Will edit it in the future as the need arises. 2. If you want to have a rough idea about the temps (like really rough) use Hwinfo app and monitor idle/gaming temps. If you Want a better idea run Antutu, 3Dmark and other benchmark tests before and after applying this thermal paste. If someone is not willing to change the thermal paste themselves (which is fine) ask your laptop service guy to apply this thermal paste (buy it yourself), if the service guy is hesitant tell him that this is non-Conductive thermal paste (it won't damage the motherboard even if some of it spills on to the motherboard).