Raindrip 052050 1/2-Inch Drip Irrigation Supply Tubing, 500-Foot, for Irrigation Drippers,Drip Emitters, Irrigation Parts, and Drip Systems, Black Polyethylene

Works great for muscadines.

Works great , good price and does the job !

The 500 ft option is the best deal I could find. Tube quality is pretty good.

I ordered this product to add a new section of irrigated garden space. I normally buy from a commercial distributor, but found this at a great price, and it arrived very quickly. The tubing is sturdy, but still bends easily as it is installed. My only issue is the inside diameter is slightly smaller than other brands I've used over the years. hat made using connectors that have to be forced into the end of the tubing a little difficult. When working with the product outside on a hot day, I could leave the tubing out in the sun and it made it a little easier to use, but when the tubing was cold, it was a bit of a struggle to insert connectors. When installing emitters, I found they inserted into the side wall of the tubing just as well as other brands, and I've had no issues with leaks, from connections or emitters or taps inserted into the sides. We're half way through summer here, and the product has help up perfectly. I can still recommend this tubing, but would suggest using it while the temperature is hot, or at least have a bucket of hot water on hand to warm the ends up to allow connectors to be inserted easier.

This connects well with my emitters and the barbs in the main line. After a handful of times being pulled off the barbs they deform with swollen ends making a looser fit. I could have cut off a half inch and reconnected it, but I decided to buy some 1/4" spring clamps to go over the barbs because I didn't want any popping off while I was watering.

Looking for some poly tubing that fits all of those thousands of 1/2 inch (0.500) drip irrigation fittings available on amazon? This is literally the only one I could find that actually fits. For some weird reason all the others I tried are actually 3/5 inch (0.600) id instead of 1/2 inch id. Like all poly tubing it's rather stiff and will happily kink rather than bend. I just hit it with a hair dryer to warm it up a bit while I'm bending it. I still don't get 90 degree bends out of it so I bought some elbow fittings for that. The bottom line is that poly tubing was the only type that would work for my application (not vinyl, pvc, etc), and this is the only one that fit. If you don't specifically need poly tubing, stick to vinyl or pvc since they're easier to work with.

Its much smaller overall than any other 1/2 inch supply line ive bought, so now none of my fittings actually fit. Careful when buying this if you have existing attachments you think will fit

This drip irrigation part is alternative to the kits and brand sold at Lowe’s and it’s a fraction of Lowe’s pricing. We started with the Lowe’s kit and after deciding to convert our 30’x120’ garden to drip to provide better irrigation and save water, we needed a more affordable solution. We bought 1/4” and 1/2” tubing on Amazon, drippers, and all the 1/4” & 1/2” couplings and fittings. We installed 300 drippers on 6 zones in the garden. 100 drippers on 2 zones in the front landscaping. The 1/4” polyethylene line on Amazon is a little tougher to slide over fittings, but 3 seconds under a heat gun it slides over easily (don’t go more than 3 sec). 50 drippers is about the max that can function on a traditional garden hose bib. We run each zone for about 30 min daily here in Florida (we haven’t had rain in a while and soil drains quickly). We were running sprinklers for much longer and the plants still weren’t getting enough water. A few days on drippers was quite a noticeable difference. Buying all the parts on Amazon saved us 1/2 or more on the project.

Used this to make a solar pool heater and it worked great. Didnt kink, easy to set in a spiral. Dont think there would be any issues when using it for what its intended for as sprinkler hose.

I expected this hose to be soft material but it is very stiff and solid.

This poly drip watering hose will work great for our garden. Thanks

Used this to make a DIY pool heater. It does kink easily and took some effort to manipulate into coils, but was able to make it work and get all the kinks out. Works great and no leaks!

This was the exact right product for drip irrigation main-lines. (It was actually rainbird branded when I got it). Funny enough, Homedepot/Rona had the right fittings for this, yet the wrong size/type tubing (theirs was too big). I was astounded that this worked, when all the 1/2" fittings I've tried to buy through amazon have been much too big.