
๐ Paint like a pro, protect like a boss!
Valspar 5339-27 New Kbota Orange Tractor and Implement Spray Paint delivers a factory-accurate enamel finish in a durable 12 oz. can. Engineered for heavy-duty use, it resists rust and fading to keep your equipment looking sharp season after season.
| ASIN | B0041RZEO0 |
| Best Sellers Rank | #1,230,314 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #2,951 in Spray Paint |
| Brand | PlastiKote |
| Brand Name | PlastiKote |
| Color | New Kbota Orange |
| Customer Reviews | 4.2 out of 5 stars 351 Reviews |
| Global Trade Identification Number | 00080047185601 |
| Item Volume | 12 Fluid Ounces |
| Item Weight | 1.08 Pounds |
| Manufacturer | Valspar |
| Model Number | 5339-27 |
| Paint Type | Enamel |
| Part Number | 533927 |
| Size | 12 Ounce |
| UPC | 080047185601 |
H**Y
Good nozzle, OK coverage
See photo of the painted area next to original paint on my 2002 snowblower. I bought this to re-paint a cub cadet snowblower from the early 2000's. After wire-wheel brushing, sandblasting, rust-treating, and priming, this was my final step. The first thing I noticed is that the nozzle on this can is high quality. I wish it produced a fan-shaped pattern instead of a round one, but when I held the can about 9 inches away the pattern was 5-6 inches wide. This made it easy to overlap properly and avoid runs. I sprayed a light coat over the entire disassembled snowblower, but that used up the whole can. I'm now ordering two more cans to make sure that I have enough to put a second good coat on the blower. I may need a third coat because this paint does not seem very opaque, everything shows through more than I thought it would. Some final thoughts: -Use a gray primer, not a black one because this paint doesn't cover well (those complaining about color match issues may just be seeing the primer showing through) -Buy an extra can, because it doesn't go as far as you think it will. -Cub Cadet changed their shade of yellow over the years, but this is a good match from about 2000 to present. -This paint says it needs to be applied above 65 degrees, which may be an obstacle for some people with cold sheds. -Prep and prime, or it won't last UPDATE: It took 3 full cans to properly paint a snowblower (one coat per can). Now that it's done it looks brand new, but I wish it hadn't required so many coats to keep the primer from showing through. I was also surprised at how quickly the cans ran out. In spite of these shortcomings, I think this paint is the best option for those wanting to paint their cub cadet equipment.
I**E
this one is pretty much dead nuts
Usually these paints are a shade off. But wow, this one is pretty much dead nuts. I painted the top of the deck, the part that was under the mower you couldn't see a shade difference the parts that were exposed obviously was lighter in color, made the entire deck look like i just replaced it with a new one. When i got the mower i had sprayed the bottom of the deck with a high gloss appliance paint, after that dried i hit it with dry moly spray. At the end of the mowing season i take the deck off and clean the dirt, grass, moly off, touch up the spots where branches, rocks pitted, and repeat applying the dry moly. helps with bagging and mulching. I used to get a small line of grass trimmings when mulching in #2 from #3, now i get the trimmings if i drop it to #1. To me it's worth the extra work, allows me to get away with mowing less which is always a +.
G**G
Color matches and delivered well before quoted lead time
Color matched well with OEM color for Cub Cadet snow blower. Quoted product delivery was something like 2-4 or 3-5 weeks and happily received about 1 week after order. Dis-assembled, sand blasted, primed and painted snow blower housing and other front end components and will see how it holds up during use over the winter. It is a bigger, full featured snow blower unit that is 14 years old so seemed worth the effort to maintain as these usually rust out before wearing out. If paint doesn't perform will consider updating with comments.
S**I
Closest match to Weber BBQ Gray that I could find
I rebuilt three Weber Summit 600 series grills, and after a lot of searching, I found this to be the best match to the gray that Weber uses. It's not a perfect match, but since I sanded, primed and painted the the entire side and back panels, you can't tell. I had to replace the bottom panel due to rust, so it's the original Weber gray. It matches up well to the Valspar MF Gray Tractor paint.
H**B
Tractor Supply REALLY srewed up when they stoped selling this product and replaced it with something of lower quality
I use the spray can to touch up only, I use the regular paint/hardener mostly. I run a pedicabs business in Houston (Ready2RollPedicabs) and have used Valspar paint for a few years now. I use to use other products such as professional car paints to Rust-o-ileum. I like this paint because is resistant to chemicals backing it down, like hydraulic fluid/ break fluid offend does to paint making it peel off.... It dries quick to the touch, the spray paint dries in minutes, the regular paint/hardener about 4-8 hours and fully hardens 12-48 hours, unlike Rust-o-ileum. Rust-o-ileum can take a month to fully cure and the paint remains gummy, variable to scrapes. The paint looks really good and can be used on fiberglass, which my pedicabs carriage is made of. It is very durable and doesn't crack on flimsily surfaces such as fiberglass. I hope Valspar never stops making this product, it is really remarkable product and is price makes it the best bang for your dollar. It is very hard to find this product, I have only found it on Amazon.
G**T
Good paint, color is off
It's a quality paint, but the color doesn't match my new 2012 Cub. The paint is a shade lighter with a little less orange in it than the factory Cub paint. However, since I'm just going to be using it to touch up the deck on a yearly basis, it should work out alright, much cheaper than the OEM Cub paint.
D**Z
Perfect paint for my project!
I purchased a self propelled cub cadet mower with a lot of scratches and couple rust spots on it. I was planning on just touching up, but then seeing how well the paint sprayed, with thicker consistency, I decided to do the whole mower. I put 4 thin coats on it and still have quite a bit left in ONE can. I use to be a professional painter, and familiar with paints/applications. This paint is not too thin like many cheaper paints, which makes application so nice and easy. You can't find a better deal. I don't know how the actual cub cadet paint is, but sure it can't be better than this stuff. Thumbs up from this customer!!!!!! I got a great deal on this cub cadet mower because of the excessive scratches on it, and so happy I now have a new looking mower for 1/4 of what a new one costs. Thank You Valspar!
A**H
Bad, Bad color match - paint lifted over rustolum primer - JUNK
Bad, Bad color match - paint lifted over rustolum primer - JUNK Do not buy this paint it is a joke the color does not match I don't know why everyone else gave it such a good review the color is way too light. I used on a Cub Cadet 2011 snow thrower and the color way not even close. Looked more like a lemon color. Also when I spray the paint on it all crinkled up and lifted when I sprayed on top of Rustoleum primer what a joke and to top it all off I can't even return it. I dident take a picture of the bad color match because I was to busy trying to remove the paint because it lifted right away and I wanted to get it off before it dried that way. What a joke I can't return something that's not any good
Trustpilot
2 months ago
5 days ago