Flash Gaming PC Case Micro ATX, MATX Computer Case with 4 ARGB Fans

Its actually a really nice case for the price especially if you're building a low powered pc, fans can be a bit loud but the RGB is pretty decent if basic but again for the price this is not even a complaint. Build quality is also pretty good and the glass panel is absolutely stunning.

This PC case has been solid from day one — sturdy, well‑built, and exactly as described. All the parts worked perfectly out of the box and everything still works a year later. The only minor issue was one misaligned rubber pad around the glass panel screw hole, which meant the screw went through it. It hasn’t caused any noise or problems, just a small annoyance if you’re aiming for a flawless setup. Overall, a great case that’s held up really well.

The only reason i bought this because it was cheap and looked somewhat decent and it is! the only downside is that i cant seem to adjust the RGB,like actually turn it on and off. But otherwise.... well... if you looking for decent looking case with RGB fans and plenty of space inside then i guess this is a good choice.

Obviously the build quality isn't the best and mine even came broken upon arrival but I bought it used to save a few bucks so I'm unsure if that was the reason why. I was thinking of returning it but I decided not to. The fans are quiet and look cool, you can also change the colour by pressing on the small button near the power button which is pretty cool. Its a Micro ATX case so you'll need a smaller motherboard but it fits everything even a pretty chunky GPU. Not too sure about the airflow but its whatever.

I bought this for my little brother as I was building him his first gaming PC for Christmas so I didn't really want anything too expensive. This case isn't that much different to the case my own computer uses, so it was fairly easy to get to grips with due to previous experience. One thing that was pleasantly surprising with this case given it's only a MicroATX one is how surprisingly good it is at cable management, even when using a non-modular PSU! I've built a fair few computers for myself and family over the years and I've always struggled with hiding all the cables. This one wasn't really much of an issue which was quite shocking, especially given the fact it's actually an inch shorter than my own case! The case does an adequate job of cooling too, considering I opted to put an older, more power hungry GPU into it, it's handling it quite well. The case fans are nice and quiet, and I had a bit of a surprise when I pressed what would normally be the reset button and realised you could change the colours! Overall, a very nice case given the price.

This was quite a risk for me because there weren't many reviews at the time and did seem too good to be true, but I decided to take the risk. It came a day early and was nicely packaged. It comes with everything you need, from cable ties to motherboard standoffs. It was quite small and neat-looking, which is a rarity at this price. The tempered glass on the side and the front was covered with a protective sheet. The 4 RGB fans and the standoffs were already installed! The parts I used for my build was a Ryzen 3 3200g, RX 580 and 8GB ram. Installing the parts seemed good and managing cables was easier than expected, but then I realised I couldn't connect my hard drive cables since there wasn't enough room, so I took out my HDD, plugged the cables then screwed it back in and it JUST fit. That was the only major problem since there were plenty other spots to thread your cables through to the front. The fans were connected by a single SATA power connector. At the end, I was very pleased with how it looked, despite the hard drive problems and the front fans having no dust filters. I was close to giving this 4 stars, but the price tag and the fans blew me away (haha get it?) and that is why I would recommend it to anyone looking for a great budget case.

case is very nice, very soild only problem is the front, there is not much space for fans to suck in air, i removed the front glass and made buffers and re stuck it back down.

So after building this and running a few games I realised my GPU card is hitting over 90deg C not ideal, so turns out there is literally no airflow through the 3 front fans at all so the investigation began, I have seen other reviews saying tha fans are rubbish these fans are OK and are capable of moving plenty of air given the chance. So I removed the front from the case there is 6 clips on inside and the plastic front pulls off with glass attached instantly my temps lowered, turns out the fans are tight up against the iside of this glass and I mean tight like 1mm from the inside and no air in on a fan you arent gonna get any out. So the modding began, I removed the glass from the plastic front carefully, it has 2 strips of goopy glue down either side got all this off fairly easy with some IB alcahol careful not to scratch the class so dont use anything metal to scrape at this. I then had some bits of plastic dont know what there were off (found in Junk drawer) but these are like 10mm square and 20mm long, I then used foam pads on either side and placed these between the plastic front and the glass as in the Pics I posted, you will then have a good 10mm between glass and fans, plenty of airflow. Few other things to note, this case only has space for one 3.5cm drive and two 2.5cm so if you got 2 big drives they not gonna fit I made some standoffs and stacked 2 in front of power supply it's tight but fits just. Also if your power supply is longer than standard like mine (Thermaltake Toughpower 1000W) it fits but not much room it covers up 2 of the munting holes for the HDD so I ended up moving mine forward by drilling new holes in bottom. I love the size of this little case but if you dont want to mod it and just want something to chuck your build in I would avoid as without this airflow mod you WILL have overheating issues.

Per questa fascia di prezzo (sotto i 50€) è sicuramente il miglior case che abbia mai montato, a livello di altri che costano più del doppio. E' un case medio/piccolo, per schede madri Micro ATX, con uno spazio separato da paratie di metallo per l'alimentatore, gli hard disk ed i cavi, che restano separati e non a vista. Quattro bellissime ventole da 12" illuminate RGB, con colori selezionabili tramite il tasto reset sul pannello. Le tre ventole anteriori immettono l'aria nel case da feritoie laterali del pannello anteriore, aria che poi esce dalla ventola posteriore e dall'alimentatore: il flusso è molto buono, grazie anche all'assenza dei cavi che sono tutti ben ordinati ai lati. Il frontale del case ed il pannello laterale sono in vetro temperato leggermente scuro. Il case è in metallo leggero, unica caratteristica che ne denota la classe economica, cosa che non si direbbe, invece, per la bella estetica e l'ingegnerizzazione. Molto soddisfatto.

nutze jetzt schon seit gut 2 Jahr das Gehäuse und bin super überrascht die Lust geht gut durch der PC wird nicht zu warm die LED Lüfter machen ihren dienst

Thus is my first time to build a computer, I like it, it is small case, but it can fit everything in a nice way with very good price. The quality is perfect, I totally recommend it. I built this computer for my son and he is happy with it, and I'm happy too.

Prima case aleen het kwam met een paar beschadigingen niet heel zichtbaar maar alsnog het is wel aanteraden

Envió rápido, muy bien embalado, les compre otra cuando comprobé la buena calidad y su bonito diseño, ruido ventiladores muy bajo, caja bien ventilada.