SABRENT 2X 2.5" SSD/HDD Mounting Kit

I initially wondered if I could stack 2 2.5 portable HDDs that I had shucked on one bracket, but you can’t. However, the full kit from Sabrent is solid, didn’t have to dig around for actual drive or rack screws. Each of my 5TB 2.5” Seagate drives fit nicely solo in each bracket. The included straight AND right angled SATA cables worked out well. Heck, I liked the bracket so much I ordered a 3rd to properly stick 2 SSDs on one together.

Good quality,well fitting.Works!

Worked good for my application. Plenty of screws, 2 different sizes. The ones that fit the Samsung SSD were flat heads. Which isn't perfect, but they worked.

The description of this converter reads: "The Sabrent 3.5" to 2.5" Bay Drive Converter Kit easily transforms any available 3.5" bay drive to accommodate up to two 2.5" hard disk drives or SSDs. The Converter Kit is designed to work with all types of computer cases (screw-on type or tool-less type), and can be installed quickly." Unfortunately, the mentions of "any available bay" and "all types of computer cases" are not entirely true. I use an Antec case which has a removable enclosure that contains up to 3 3.5" drives in it. When 3.5" drives are installed, they mount to tool-less quick insert/remove drive trays by the screwholes on the bottom of the drive, and the bottom of the tray. However, this mounting bracket does not have screw holes on the bottom. It can be mounted only by its sides. If you look carefully at the pictures (which I failed to do) you can see that there are no holes which will allow bottom mounting. Since my Antec drive trays are not drilled and tapped for side-mount screws (and are too wide for that arrangement in any case) then this item cannot be used with them. Had I looked more closely at the pictures, I might have seen this ahead of time. The product I received is accurately represented by the pictures in the listing. Apart from this one problem, the product does seem sturdy and well-manufactured. As long as you're able to use side mounts in your existing 3.5" bays, I suspect it would work well.

Worked well but should have better instructions.

Was perfect fit for my 2.5" SSD/SATA drive. Well made, light weight and a bonus all the cables. The only thing that was an issue the mounting holes didn't line up with any of the holes on the computer case. I drilled new holes in the case, problem solved!

I think I was one of the lucky ones that got a kit that included both the Molex-to-SATA power splitter AND the SATA 15-pin-to-SATA splitter. The bracket went together easily with my two new SATA SSDs. I took the advice of others and flipped the top SSD so that the connectors weren't stacked so closely. My kit had one SATA data cable with one right-angled end. I got creative with those to make sure they all fit without cramping each other. I will say that even the SATA 15-pin splitter has the molded plastic head, so use at your own risk, depending on where you stand with the hazard-level of that kind of construction. I didn't need it, but it looks well made. I would use it, just sayin'. I like the inclusion of all of the screws required, plus a few extra in case you lose one in the carpet. C'mon, you know you've done it. I'm already contemplating another one of these for another build...

I used this to install 2x 2.5" SSDs into the 3.5" drive bay of a Dell Optiplex 3020 SFF system. It worked perfectly. All the necessary accessories (screws, cables, power splitters, even a little magnetic screwdriver) came with the kit, so installation was a breeze. This is a high quality product, totally worth the price, and I would 100% buy again if I ever needed one for another system. There's a little space in between the drives I used so maybe it could even accommodate one or two thick (15mm) drives like the Seagate Barracuda 5TB. Not owning one of those drives to try it, I'm not 100% certain. But you could *probably* squeeze at least one of them in there. Maybe someone else who has one could confirm/deny.

Det fanns ingen 2.5"-plats i chassiet, men den här fixade det.

Perfectly Fit for imac 2015 quality is good they provide sevral skerw to fit hdd .

Met my expectations. Thanks.

Excellent product 3.5 to two 2.5 drives Usefull and easy to install All items required included in the box even the screw driver and screws

I installed a new SSD in my desktop computer. If that is what you want to do, you won't find anything better than this. It is a complete kit. The material of the casing is sturdy with smooth edges and the cables, screwdriver and screws are as required. Highly recommended.