– A4 X 20 Films Transparents Pour Rétroprojecteur, Impression Jet d'Encre, PPD-34

I used the product in an old Epson XP-325 ink jet printer, set on Glossy paper setting. Obviously I ran the Epson maintenance test print to make sure all printer ink colours were okay before I started printing on the item purchased. I was really pleased with the print it produced. One of the reviews said that they could not tell which side to print on. The instructions say that there is a little cut off on the top right when you have the correct print side. So I did not need to try feeling the difference between sides with my finger like they were trying to do. One of the other reviews says that there is a blue tint. It does have a slight blue tint but this does not seem to matter on what I have printed. The picture I have attached shows the first test print I did on top of a plain white sheet of paper. The print outs can look good if you put them on a window.

Great product and good value. I'm using it for printing inverted photos to use as contact negatives for cyanotype prints. My Canon inkjet printer works well with these sheets, set to glossy, and the results are detailed and with a good range of tones, which translates into good prints. I've had no problems with smudging, they seem touch dry out of the printer, but I leave them to dry for half an hour or so before using them. I will be stocking up on more when I've used these up.

Easy to print onto and works well for cyanotype exposures. A bit pricey but overall is decent value.

Works really well with printing photos

The product is very easy to use and has good quality. Also, consists of an easy-to-follow instruction sheet on how to use it. Overall very satisfied :)

As OHP film, this probably works great but they are definately not "clear". They have a slight white sheen to them making them slightly opaque meaning they were no good for me to use.

Clear to see through and not too shiny to reflect light

Can be difficult to print on and has to be left to dry But it did do the job after multiple attempts

Excellente qualité pour ce que je veux en faire ! J'ai une imprimante jet d'encre

Come fogli sono ottimi, però se si usano per la foto incisione di circuiti stampati non bisogna mettere due di questi fogli sovrapposti con la stessa immagine perché i raggi UV del bromografo vengono un po' bloccati e non si riesce ad imprimere bene lo stampato da sviluppare.Quindi cercare di stampare due volte la stessa figura sovrapposta su un foglio solo. Chi se ne intende ha capito. Poi il foglio lucido va inserito nella stampante con l'angolo mancante a sinistra del cassetto. Le due facce del foglio non sono uguali .

so far so good

In der Anleitung steht "OHP Film - Feed with notched corner on left on leading edge". Ok, also die Ecke mit dem abgeknipsten Stück links oben. Dachte ich. Funktioniert leider nicht, wie man auf dem Foto sehen kann (2. Bild, oben), die Tinte trocknet nicht und kann auch nach einer Stunde abgewischt werden. Das ist die glatte Seite. Also das Stück abgeschnitten, nochmal mit der matteren Seite eingelegt, einwandfrei! Hier verwischt auch nichts mehr. Habs tatsächlich mit Wasser versucht, der Druck geht nicht runter, dafür gibt das Flecken auf der Folie (3. + 4. Foto), die Folie wird erst transparent (ist sonst etwas milchig) und dann weiß. Offenbar reagiert die Folie auf Feuchtigkeit, was sich, denke ich, auch auf die Haltbarkeit auswirkt, aber das sehe ich erst im Langzeittest. [Nachtrag] Der Fleck ist nach etwa 10 Minuten vollständig verschwunden - also alles wieder bestens. Ich drucke mit einem Epson ET-8500, habe die Folie in das hintere Papierfach gelegt (also der hinten oben), Druckmedium "Photo Paper Glossy" gewählt und Qualität "Standard".