AtmosFX Hollusion Projection Material, Grey, 5.5 x 9 ft

I have been searching for the right projection material and kept running into issues where the piece of fabric wasn't quite the size I wanted or had hot spots. This fabric works great. My projection material does have a visible line through it near the center - although this was disappointing, the screen is still a great addition to our Halloween display. I have a removable fence panel that I removed and put in a frame for the projection material. I then used clips to attach to the projection material.Presa 61000 Heavy Duty Tarp Clips, Black, 4-PieceOne note, is if you use clips like the ones I purchased, make sure the screen material doesn't get down too deep in the clip as it can get caught in the screw that closes the clip.This has worked great in my yard - the projection material is a good weight and stretches nicely.

Worked out great as a screen. There are no grommets to be able to attach it to anything so we just tied the corners in knots and slipped the knot into the screw that was attached to the walls. This did not damage the material which is very light, like a pair of tights for leggings would be. Worked out great for projecting my Halloween Digital Ghosts on. The only thing I can think of that would improve this product would be the addition of Grommets or some sort of border which would allow you to attach the material to a wall so you don't have to improvise. At over $50, it was expensive.

This material works quite well as a see-through screen. It was heavier and stretchier than I was expecting. That's actually a good thing because it makes it easy to keep wrinkles to a minimum. My only negative for this was that the grommets are not spaced very well. I had built a frame to hang this on and after I got all the hooks in place for the grommets everything was fine. I took it back down off the frame and when I went to hook it back up, I had to make sure it was hanging exactly the same way it was before. If I reversed it, the grommets did not line up with the hooks and I ended up with sagging material in some places and over-stretched material in other places.

I purchased the projector plus SD card from their website, but this screen was cheaper here on Amazon. I made a frame out of PVC, set it over wooden stakes pounded into the ground, zip ties holding the frame to metal trellises. Mother Nature was a real witch this year in Rhode Island, but the rain and wind stopped long enough for a fewe hours of fun for the kids. The images at night looked great in the yard, and also in the window. If you use the projector in a picture window, try a white bedsheet first and see how you like it, but this material works great in the yard.

I didn’t want to spend this much on material five years ago but I finally gave in after struggling to find the right material for holograms and I am completely blown away. The only thing I will say is that this material is best used at night or you will notice it isn’t as sheer as you’d like. At night it is perfectly sheer and is amazing. Great buy and worth the money. This is a very large piece of material and it is very stretchy. I am definitely going to buy another one.

Use for rear projecting fright video as part of our Halloween display. The material is the perfect shade, form to maximize rear projected image (we tested many alternatives and this was the best found). The material is sized as specified, however is is 'stretchy' so it will expand a degree. We built a 6' x 10' frame using 1/2" PVC and short bungee cables (material has built in grommets) and it worked very well. Position your projector off center, (right/left, above/below) screen to avoid 'hot spots' and use projector 'keystone' adjustment to give best effect.

I bought this in Oct 2019, but this is my first time using it. Works well, but 50% of the grommets already ripped off the material.

This material is quality but the only time I’ve been able to use it is in extreme dark conditions. If there is any light outside the image you are projecting will look slightly dim. Unless you have a super bright projector...3000+ lumens...it will absorb some of the brightness from your image. When I was able to use it with success, there was zero outside light and my projected image...the Phantasms line...looked wonderful. I’ve tried to use it with a little bit of amber light outside from lighting in my apartment complex and it just makes the images look dim. I’ve had much better luck using the white window projection material.

Ich habe 6 Wochen nach der idealen Gase/Folie für "freischwebende" Projektionen im Raum gesucht und dieses Produkt hat sich mit Abstand als Bestes erwiesen. Nahezu unzerstörbar, faltenfrei, extrem feinmaschig, mit praktischen Ösen ringsum und hochdehnbar - GRANDIOS!

Used it for Halloween. The kids loved the projections - some were too scared to come up the driveway by themselves. Plan on buying more material and another projector for next year.

Very fast delivery! Ordered on Sunday, shipped from the UK and received on Tuesday in France! Great product! We just love the holograms we created :-) My 3 year old son doesn't fear ghosts anymore. He loves them! Well, we chose the cutest ghost videos we found on atmosfx website :-)

Works well with the projector, have a netting that was cheaper and does the same thing. Would shop around.

Bester Stoff den ich kenne. Teuer, aber kann ich empfehlen.