GEARWRENCH 77 Piece SAE/Metric Ratcheting Tap and Die Set -3887

Starting with speed of delivery, outstanding customer service, the set itself which for an item not used often, I tried it on three different dies and they worked perfectly. I did try a set that was half the cost it did not do well sent it back for this one and I am so happy with the gearwrench 77 piece set, well worth the price. I have to get used to using the ratchet, mine is a small 50 or so year old craftsman , but I am going to like this one

I really like this tool brand. I used to be loyal to a tool brand until they brought the price up and the quality down. The case in very nice keeps everything organized and easy to read sizes. It's a little bit pricey but I am in need of the tools. They make very nice threads on bolts and nuts

I recently purchased a tap and die set for my son's birthday, and I wanted to share some feedback.He has used the set several times and considers it the best he has ever used. He noted that the quality is exactly what he expects from Gearwrench tools and specifically mentioned how much he enjoys using the ratcheting handle.I am so impressed with his experience that I will be purchasing a second set for myself.

The ratchet is handy I tight spots but the smaller taps are easy to snap witch is most small taps but they cut super well and the die work have used on a impact even if your not supposed to

Great set, used it to restore threads in my 2000 Mercedes. Sharp and durable.

As I’ve stated in some of my other reviews, I don’t really like to write or read reviews of products that haven’t been used yet. However, in this case, these are not a tool that I would ever use frequently, and had no immediate use for when I bought this set. This was purchased more as an “in case I need it” item. I have needed something in the past for occasionally chasing threads, and maybe occasionally actually threading something. I’ve seen some of the really cheap stuff. I didn’t want to waste my money on total junk. Some research on Amazon, and I came across this set. It got good reviews. I’ve used some other tools made by Gearwrench, and found the quality to be good. I would put their stuff on par with Craftsman brand tools. Upon initial inspection, the steel looks good. Again, I have not actually used these yet. I would hesitate to use these in any kind of commercial setting, but I’m thinking they will be plenty good for occasional home use. If and when I use these, and there are any negatives, I will update my review accordingly. Overall, these appear to be in the very good value range.

I was a diehard Craftsman tool guy because my grandfathers (both mechanics) had been and had instilled that in my dad, too. Then Craftsman moved production overseas, quality truly did suffer, and they became snippy about replacing damaged tools. Honestly, it’s more important to me that the tool not be prone to failing in the first place, but that’s another story. Point is, with my old favorite rapidly losing my trust I began looking for other brands that cared about quality. GearWrench has been doing a good job about that. I bought this set because I saw one at work and it gave the impression of being well made. Have now had my own set three years and am very pleased that it’s still my favorite of the 4 tap & die sets I own. This morning I went back to a large Craftsman set I bought shortly before getting this set, mainly because it was closer to my project than the GearWrench. It reminded me immediately why I don’t buy craftsman anymore - the brand new M10-1.25 die destroyed a stud full of paint that I was trying to chase. I triple-checked that I’d used the right die, hadn’t forced anything, etc. and then got a new stud and carefully tried the same die on it. Nope. Got the GearWrench die - yep, perfect and smooth fit. Compared the two dies and I can’t tell exactly what’s wrong but I *think* the M10-1.25 marking on the Craftsman is wrong, and it’s actually M10-1.5. Regardless, one more strike against the old stand-by and one more notch up the scorecard for GearWrench.I will absolutely buy this set again.

Purchased this mostly to chase and clean up threads on a truck restoration I am working on and it has done a great job. Have also used it to rethread an exhaust manifold that had to be drilled out after a stud broke off. Used plenty of cutting oil and took my time and it did just fine. I like the ratcheting head because it can get in fairly tight spaces and being reversible helps a lot. Not a machine shop quality tap and die set, but for occasional use, taking your time and using plenty of cutting oil, I would highly recommend!

I got this for less than 100 USD in Singapore, for what I got, I can't complain.Die cutter can't bite into stainless steel properly. Mild steel and other metals aren't problem. Ratchet handle isn't very good, it's not stable in XY axis, you will have problem threading a screw with the die... unless the rod you have for making the screw you have is properly tapered at the top and fastened. Achieving 90 degree angle consistently is hard. I couldn't cut a chamfered 10mm rod, because when I press hard on handle to make it bite, ratcheting center will wobble.Coming to the taps, cheaper tap I got from China (a local, less known brand) cuts better into mild steel vs this one. I didn't attempt with harder metals. It's acceptable quality for softer metals.Thread gauges for measuring pitch, they are fine so far, tested normal and very fine threads, the match is good.I wish the ratcheting handle was better, not sure if I need to separately buy a die handle now.You can probably use a vertical press drill, attach your rod there and put the die in the drill vise, cut the initial 2-3 threads before moving onto ratchet. Not good for my taste.

El artículo llegó puntual.El estuche se nota resistente y alberga a los troqueles sin que estos se suelten.La orientación donde se almacenan los machuelos puede cambiar de posición y esto hace más fácil su selección.Se nota un buen acabado en el producto.

As described. It's a shame that not all taps are bottoming taps, some are pointed and not doubles.

Quality product

I used this 5 times...