Heat Shrink Solder Seal Wire Connectors Kit 200PCS | 26-10 AWG Waterproof Electrical Connectors for Marine, Automotive, Truck Repair, Solderless Wiring Splice Connectors

Picked these up for wiring on my builds and they work great. Super easy to use—just strip, insert, and heat. The solder flows nicely and the heat shrink seals everything up tight, giving a clean, solid connection without needing separate tools. I’ve used them on automotive wiring and they hold up well, especially with the waterproof seal. Way quicker than traditional soldering and more reliable than basic crimp connectors when you want something sealed and durable. Nice assortment of sizes and the case keeps everything organized. I do a lot of my own wiring and tuning work, and these have definitely made things faster and cleaner.

This is a good product and a time saving idea. Just insert the stripped wires and use a heat gun. Soldiers and seals in one operation. No weak crimps or corrosion from moisture in the future. A tug test did not separate the connection. This is the way to go!

I tried out on a couple projects I had and they performed well. great price and the heat shrink works well too.

I picked up the Kuject Solder Seal Heat Shrink Butt Connectors for some wiring projects, and honestly, they’ve made my life way easier. If you’ve ever struggled with messy connections or worrying about durability, these will be your new best friend. The best part? The solder ring inside melts perfectly when heated, creating a strong, clean connection without needing extra tools or messy soldering. Plus, the heat shrink sleeve seals everything tight and waterproof, which gives me confidence that my connections won’t fail even in tough conditions. I tested these on my car’s wiring and some home electronics, and every joint has held up great — no corrosion, no loosening, just solid connections. They’re also super easy to use, even if you’re not a pro. With 200 pieces, I have plenty to keep me stocked for future projects. Overall, I’m really happy with the quality and performance of these connectors — they definitely take the headache out of wiring jobs.

Great product! Creates a seal around the wire perfectly. Good shrink around the wires and the solder bonds well to the wires.

So, I actually ordered these by accident, but after I realized my mistake, I figured I would give them a try. I thought I bought crimp and seal connectors like I always use, but these are a low temp solder that melts with a standard heat gun. I used them last night on a replacement headlight connector in a Silverado and they worked like a charm. Cut the old connector off, installed the solder connection and the new pigtail, mate wires and slide the connector and hit it with a heat gun until the solder melts. EASY. I had my doubts at first because I figured the connector would melt before the solder made a real connection, but they worked like a charm. The connector shrunk nicely around the wire and the colored sealant melted into place and spread out and shortly after, the solder flowed into the wires. pretty slick to be honest. the joint set up and seems to be watertight and a solid connection. good value and I'll be using these more often for sure. They seem to be well made and look like the connection will hold up.

These do work. At first it seemed like the solder was not flowing properly and I was heating a long time with one of the cheap portable heat guns but I didn’t realize that in reality it is not the flow that does the trick with these. If you wrap your wire correctly and insert into the connector, the solder basically makes a nice clamp. The solder doesn’t really flow as much as grip your wires and that is fine for me. It sets up well and holds strong after just a few seconds. It took me a few tries before I realized how they work. It says that the ring may not fully flow and it does not but it does deform into a vice like grip and I’m fine with that as the copper is what I’m connecting, not the solder. Once you get past that it is a lot easier to accept. Now if my heat gun is sub par I understand that it doesn’t ad to the flow characteristics but it did exactly the same thing with a lighter so it works how it works. They do hold very strong and I actually prefer just the clamp ring for car audio. Much better than crimp connections and seals apparently water tight with the adhesive included. I was not able to burn the plastic with the lighter either so that is a plus. Overall once past the learning curve this is a fine product that I will continue to use.

Some of these solder seal pieces did not completely melt. I am questioning the quality of these and my electrical connections. Was hoping for better.

value for money

Molto comodi per giunture elettriche su veicoli, varietà di misure buona

Super handige alles in 1 oplossing om kabels te solderen en isoleren. Scheelt een hoop tijd met dit setje.

Bonne qualité

Very good