AC Infinity, Aluminum Ventilation Grille for Cabinets, Black 6”

Got two of these for the amps in my car. They live under the false floor where things can get toasty fast. Before using these to mount 2 120mm fans (intake and exhaust) the amps were getting extremely hot to the point where I could not keep my hand on them for more than 1 second. After using these with the fans, the amps just get warm even after an hour of play time. I used these in conjunction with two Corsair ML120 Pro fans for their super quiet operation even at full tilt. Connected pos and neg together on both fans and ran that into a single pigtail connector (for easy removal of necessary), which ran into the relay used to provide a switched 12v signal for the amps and dsp's. Fit and finish of these grills are on point. They look sleek and yet are very sturdy for a great price. They come with lots of screws for different applications. Will use these again in future builds!

Great unit. Of course my little fans came with a fan blade cover. Go figure. But this will fully encase the fan. I will use this as it is a cleaner look.

It works as intended. I cut a 5 inch hole in the side of my computer desk. These center on the holes pretty easily. The screws are self tapping, so they install pretty easily. The grate also comes with fan grates and extra hardware if you plan on using them as an active cooling option. I chose passive and left the attached grate.

Bought a 6" fan and an exhaust grille. Great buy for my ~10 cu ft. electronics cabinet. I put some built-ins down in the basement when we finished it and stuffed them with a burly receiver/amp, DirecTV box, BluRay, and record player. The cabinet was getting TOO HOT with the door closed. The BluRay would turn off it was so hot and the top of the amplifier was too hot to touch for more than a couple seconds. I picked up the 6" fan and matching grill for an exhaust cover to help. What a difference. The fan and exhaust plate (which is really just the grille part of the fan assembly - so it matches well) installed easily with the included template. Now the cabinet is only a few degrees above room temperature. It took me about an hour to get the fan and vent installed as I had to cut through the cabinet wall and drywall into the built out space behind the wall (fireplace wall). The fan looks great. These are quality components, not just a cheap muffin fan and flimsy plastic covers. The speed control feature is nice too, but I haven't had to turn it down from the high speed setting. It's quieter than I expected and isn't vibrating or sending a hum through the record player.

Smart looking and premium quality fan guard. No corners cut.

I bought a couple of these to build a two-way radio stand that included a fan. It allows the radio to sit up off the desk with enough room for a fan under to to blow on the heatsink of the radio. It worked just as expected. It seemed to be well built and strong enough to actually be a structural part of the stand itself. It included all of the necessary hardware. It's been a while, but I think it actually contained two sets of the necessary screws rather than just one, which was nice. If I ever decide to built anything else that needs a fan mounted to a surface, I would not hesitate to buy these again.

Reached for package in mail box and 1st thought was, this is too heavy for what I ordered. What is this? What it is, is a quality product. Black aluminum frame a,d steel honeycomb mesh screen. I ordered the 120mm size but it looks as though I could use for 80mm too. All mounting hardware included; machie screws as well as wood screws. I've bought several products from AC Infinity and am happy with all. Would I buy again? Yup. Will I buy again, maybe if I replace another cover I have that's creating too much static pressure for a fan. If you are looking for case fans and peripheral hardware, AC Infinity has got ya.

the mesh and nuts holding the mesh take up space and hold the panel off of the surface unless you carve out a space for them or make the hole bigger but its a fine vent cover

Plain-ish, brushed aluminium, black works as advertised. The 'mesh' is a little rough in a couple of places where it was "stamped and formed" but all in all good. For me, in my home theater, it was a good fit. I really appreciated the fan grill and extra nuts/bolts ... pushed it to 5 stars. Well done! Be aware, this is a nice looking, functional piece of kit; however, I would not call it elegant. i.e. if I installed it in a visible place in the living room, my wife would have a few words for me.

Perfect grill for a custom PC build :)

The grill is well built. Feels very solid and looks great. No complaints.

Great

Got this for mount my 120mm pc fan. Came on time and everything was as excepted. The mesh was a little rough in some places and I cut my finger on one of the rough edges. Other than that, it fitted my 120 mm fan perfectly and easy to install.