ASUS ABF01 ROG Bezel-Free Kit Universal Multi-Monitor Setup with Optical Micro-Structures Easy Assembly, Clear, (Set of 2)

Ok, so, this bezel free kit is certainly the best I’ve used so far and fors perfectly 27 inch triples

So I took the leap and ordered the bezel free kit after using a DIY bezel kit for a few weeks. The kit is a leap better then the DIY solution I had come up with. The film used by asus is a good deal thicker than what you find in a TV and the mounting clips make it really easy to clip them to the monitors and adjust them. The price could be a bit cheaper but at the end of the day It's nice to have a solution that looks nice and fits well. (The kit was used on ViewSonic omni 27" flat monitors)

I thought about submitting some photos, but others on Amazon have done so and they show what I'm seeing on my setup quite well. I haven't been able to take the time to position the monitors correctly and fully tune it in because my job is kicking my behind with OT right now. As I set it up last night, there are some desktop icons underneath the left one and that brought out one of the flaws in the product. The icons have ghosting/smearing on darker backgrounds. I expect that it will improve a bit after I get it tuned. The image is otherwise clear but slightly darker. And it is slightly magnified and stretched horizontally. A straight diagonal line will make a slight S curve in the middle going from one monitor to the next. Now, is it worth the price? They are worth sometime with what they do. But $50 seems to be more in the ballpark. I expect a lot of what you are paying for is the Asus and ROG names. All that OT I mentioned earlier is resulting in some nice paydays so I wasn't too fussed about the price. If you have a triple monitor gaming setup and don't mind the cost, I would say go ahead and purchase a set of these. Maybe if enough people buy these Asus will come up with an improved version that addresses some of the minor flaws. All in all, quite impressive for a couple strips of optical plastic. 4 stars because of the minor flaws and because of the price.

They were great there was nothing wrong with them, but they were the wrong size

The idea of cutting the gap between monitors for gaming purposes is such an appealing idea especially now that wide screen gaming is much more popular especially in the racing gaming arena. The idea that you can use your three monitor setup without gaps is just too good to miss out on. Unfortunately this product does not solve the issue. First and foremost, the plastic fresnel lenses are very fragile, I wasn't being rough with them but the slightest movement with the bracket caused the first crack to appear. Another crack has appeared through later tiny adjustments. Please bear this in mind as it becomes more important later. Assuming the gap between monitors is about an inch then these lenses will require you to put a huge angle to get rid of that gap. It is not a comfortable angle at all and seems to have been designed with no day to day function in mind. This means that once you have finished gaming you have to take these off. Yup, the two hours you spent trying to make it work is now undone, because you need to reposition your monitors to be useful for none multi monitor gaming. You then have to refit it, mess around trying to get rid of the gap, off on, off on, crack. These things will last about a month tops when used this way. The Fresnel lens causes all sorts of distortion and ghosting of the image behind it. The cursor doesn't appear and things are duplicated. About 4 inch of monitor real estate becomes the badlands on each side of the center monitor. You can't leave these things on if you use your monitors for more serious work or business. They just ruin the experience and you lose so much screen real estate avoiding the badlands. So I do think it deserves one star. If you are a driving game nut and you really want that experience without the gap then this thing will do that for you. But for everyone else, avoid this like the plague.

Was almost about to send this back as the lenses and attachments are very finicky, and the lenses are VERY VERY delicate and scratch easily. My first attempt to attach them caused one lens to drop to the floor, somehow got scratched on the way down. Long story short, I have a couple scratches, one quite noticeable in the pic on the left side mid screen, but once you do get them on they look pretty darn good and hide the bezels very well. When installing them the instructions say start from the bottom, don't do that, much safer and I think and easier if you attach the top section first, then slide in the bottom section. There is not a lot of lens overlap, at least on my ASUS TUF 27" monitors and the "clips" really don't hold the lens securely at all (another part of the problem). Another recommendation would be to use some tape (I used a strip of duct) to secure one of the arms on the lower brackets to the monitor, just to prevent it from accidentally coming off and getting damaged. Also way too expensive for what you get, should probably be around $24.99 MSRP...

they do work on curved monitors and you can get them to flawlessly mesh two screens together but the stock brackets are not that strong for holding the glass in place so i 3d printed clips to force them to grab the glass tighter and to get it to show no lines in the middle when using this only worked flawlessly because i 3d printed a monitor support for the bottom and back of the monitors to hold them perfectly together at the correct angle so i basically paid a hundred dollars for the glass lol which to me was worth it because the end result is what i wanted but if i didn't have a 3d printer for supports i would've returned them because its a pain trying to install it and get monitors to be perfectly together so splitting and warping effects don't show from them not being perfectly together and its probably my ocd talking about that but yeah, if you have a 3d printer the effect can be perfect for use on curved monitors that is but they do say that they’re made to be used on flat monitors so maybe that way they’re a-lot easier🤓🤘

These are super awesome. I love the effect they give on my racing simulator. The only issue I have is that my monitors are a bit too large so I need to purchase the adapter kit for 32 inch monitors. A bit pricey, but worth it in every aspect.

Really pleased with the ASUS ROG Bezel-Free Kit. It makes a big difference on a triple-monitor sim racing setup and helps remove the distraction of the bezels between the screens, making the overall view feel much more seamless. The kit was sent from the USA, so I expected quite a long wait, but it actually arrived in just over a week, which was much quicker than expected. It was well packaged, easy enough to set up and works exactly as intended. It takes a little bit of adjustment to get the angles just right, but once set up properly the effect is excellent. Definitely worth considering if you run triple monitors for sim racing and want a more immersive setup.

Quality product and fast delivery

Funciona en lo que cabe bien pero solicita que el ángulo de los monitores quede algo cerrado, da su función, pero si se pasan con dar tan caro 2 trozos de plástico

It not perfect, but it’s a lot better than two 1/2” black bars in the view. With 32” curve screens it took a while to get it right. On my other rig with 25” screens put them on, a little bit of adjustments under five minutes bingo. Wish I didn’t wait so long to get them.

Si utilizas un setup de tres monitores para simuladores de conducción, aviación o estaciones de trabajo, este kit de ASUS ROG cumple exactamente lo que promete. La diferencia visual al eliminar la brecha negra vertical entre pantallas es abismal para la continuidad de la imagen. Lo que marca la diferencia: Efecto óptico impecable: Las tiras con microestructuras ópticas refractan la luz de la pantalla para "invisibilizar" las barras negras de los marcos. La transición entre monitores se vuelve fluida y casi imperceptible durante el juego. Solución 100% pasiva: No requiere cables, electricidad ni software de configuración en el PC. Es una solución puramente óptica que no consume recursos de tu sistema. Transformación para Sim Racing: Al conducir en simuladores, no tener la interrupción del marco justo en la línea de visión lateral cambia por completo la sensación de velocidad y la percepción de las curvas. Montaje rápido: Los clips de fijación incluidos sujetan la lente de forma firme en las partes superior e inferior de las pantallas sin dañarlas. Consejo para un resultado perfecto: Para sacarle el máximo partido, es fundamental ajustar bien el ángulo entre monitores (funciona idealmente a unos 120°-130°) y alinearlos a la misma altura. Está diseñado principalmente para monitores de hasta 27 pulgadas con biseles finos. Conclusión: Un accesorio imprescindible si quieres la experiencia envolvente de un monitor ultrapanorámico gigante manteniendo la versatilidad y el espacio de un setup multimonitor. Muy recomendable si buscas máxima inmersión sin complicaciones.