Toyota Genuine Parts - Bush, Transmission C (33835-08010)

My sisters 05 Toyota Camry would not shift out of gear, it got stuck in park. Turned out to be a minor issues, luckily it was not the transmission that was damaged it was this the shifter cable bushing locate underneath the center console. Quick, easy and cheap fix, took about 10min to remove center console and install this new bushing in place. Fit perfectly, highly recommended replacing this bushing if you have not already done so to avoid any issues with this part later on down the road.

Worked for 2004 Pontiac Vibe. The Vibe is essentially a Toyota Matrix and this part allowed the gear selector and shifter cable to attach to each other again. The old bushing had disintegrated and disappeared. This should work without issue for any 2003-2008 Toyota Matrix or Pontiac Vibe.

This looks like original replacement part. Installed in a Sienna 2005. Original bushing in the car became stiff, brittle and broke apart after 20 years of service. I hope this bushing will last similar amount of time and possibly outlasts the car. This bushing is made of soft rubber, not hard plastic. It fits perfectly into the hole of the push-pull arm and then onto the knob of the gearshift. Apply silicone grease inside and outside to make it fit easier and last longer. It is possible to instead use a self-made bushing and a circlip, or even a circlip without a bushing will work fine. Especially temporarily, as it worked for me with just a circlip (shown in the last picture) while waiting for this part to arrive. One possible long-term alternative solution would be a bushing with just one flange (3D-printed from a good material) and a circlip, or a 3D printed bushing made of soft rubbery TPU. I measured the dimensions with a caliper for your convenience. "Use your 3D printer, Luke!". However it is best to install the proper part. Overall this bushing is a good value for money.

Fits perfect on my 05 corolla

Exactly the part I needed to get my shifter to work after it got broke by Costco and they denied accountability. Easy to install even for a girl, just watch the YouTube video!

Exact OEM part I needed for my Toyota. Fit perfectly and fixed the loose feeling in the shifter. Worth getting the genuine part for this job.

Definitely worked on my 2003 Toyota Highlander. Wasn't Toyota genuine but still good quality and fit perfectly first try.

Don't waste your time and money on aftermarket junk