Planet Bike Full bike fenders - 26" x 60mm (black)- Fits Up to a 50mm Wide Tire

I have a pair of 1986 Schwinn Beach Cruisers I purchased these fenders for. At my time of purchase (03-08-21) they were priced at $29.95. I am very satisfied with the fenders and would purchase again. The poly-carbonate material they are manufactured with seems to be very durable. Considering that these are a universal fit they will need to be modified for your specific bike. My particular install required the shortening of the braces that are attached to the fender that connect to the fork and rear dropout, then the adjustment of the brace length to get the perfect fit. This is easily done with a dremmel or a grinder with a metal cut off wheel or simply with a hacksaw. See pictures for more detail. The mounting hardware for the fork and rear dropouts that were supplied did not fit my bikes. I purchased the correct size from my local hardware store.

I got these a couple of days ago and after installing them, it rained the very next day! The fenders kept rain and grime from flying up onto myself, a child seat carrier and my panniers. So far I couldn’t be happier. The install was a breeze and fit perfectly on my 26” 700c hybrid bike. They are very lightweight but feel sturdy like they should hold up for the foreseeable future.

They have resisted the abuse I threw their way. Sadly, I have not really had a great chance to test them. They would have gotten better overall ratings and ease of installation except: 1. Had to obtain some different hardware because not all fasteners provided worked in my application. 2. Front adjusting screws stripped during loosening to facilitate adjustment. Fenders function well and look great. I would recommend.

Nice set of replacement fenders. Used on my wife’s Heybike Cityrun after I scratched up her front fender. Easy to install. Back fender harder to install and they suggest removing back tire. But with some work, can be done with tire in place.

I love the fenders! Shiny and light weight, and they fit and look great on my Schwinn Fordham. However, the hardware (screws and bolts and washers) are completely useless! I need 6 screw/washer/bolt sets of the same size and length to attach these. Instead I have 5 sets that are too short and 3 more sets that are 1 each of various sizes and useless. Really?!? What were they thinking? Directions suck, but it’s pretty much a no brainer to install these - if you have the right screws! If you don’t mind buying your own screws then I recommend this set of fenders!

We moved up to the Pacific Northwest and it's a lot wetter up here! 🤣 These fenders work great on my Specialized mountain bike, even with my off-road tires. They are long enough to go low over the backs of my tires; now I don't get sprayed when I ride through puddles. They are super light so the bike feels the same. You'll probably have to be a little careful not to smash them due to the light weight. To use them with my front shocks I had to do a bit of custom work. First, I bought a couple of insulated cable clamps to attach the front stays. (they should probably include those because there are so many mountain bikes out there) I also had to cut the stays shorter due to where I was attaching (that was easy). I also drilled a small hole in the back of the center part of the fork. (it's aluminum alloy so it was easy to drill) All in all, these are just what I was looking for. They should work for most bikes but may need a touch of ingenuity for mountain bikes. I would highly recommend these. 😊

Great and light fenders, I got these specific ones for my mountain e-bike as I pull my kids trailer. The length in them (plus the power of zipties) allowed me to make them go really far down so as for not splashing water, dust and gravel into my kids faces. Very good purchase (I wish they were even longer but then they're the longest out there already).

I bought these because I figured they would be better than the cheaper priced short fenders. Well, for the price, I figured they would be thicker plastic than they are...it seems like a stone will break these. Installation was an issue right off the bat; the front fenders have plastic pieces that you screw through into the "axle", and but because they're so wide, they didn't fit the forks of my bike. I had to break off the plastic and use the metal hoops contained inside them...that's how they should ship in the first place. Second, the cheap screws that they included snapped off, so now I'm stuck trying to drill it out and try again. As for the install of the back, the first direction is to "Remove the rear tire". Huh? Why would I ever want to subject myself to that? You don't have to, just slide the fender on and screw it to the bike. There have to be better quality fenders for a better price out there, don't buy these.

Le quedaron perfectas a mi Bici. Por el precio no esperaba menos. Esperemos que aguanten. Mi bici si tenía todos los orificios para conectarlas y las llantas que uso son 26x1.75

Given that they are not specifically made for one model or another it is expected to have to fiddle with them a bit, which I did. However once installed they do the job.

Good product. There was an extra bracket in the package that made mounting the rear fender very easy.

La etiqueta del producto marca que son para un neumático 26 x 1.9, sin embargo yo se las puse con éxito a una Townie Electra 2011 con llantas 26 x 2.25, tuve que adaptar un poco la salpicadera de atrás debido a las características de mi Townie, pero quedó bastante bien, llegó con algunos rayones pero pues no hay problema para mí.

Not great quality, but they went on fine and are working as advertised. They will however take zero neglect or bumping into another bike.