AOBEN Rotary Hammer Drill with Vibration Control and Safety Clutch,13 Amp Heavy Duty 1-1/4 Inch SDS-Plus Demolition Hammer for Concrete-Including 3 Drill Bits,Flat/Point Chisels.

This is another great tool, but not near as costly as my Makita. This is as effective as any demo hammer from Bosch or Makita, at 1/5th the cost. It’s solid, built to last and vey effective for removing cut concrete ribbons and punching through concrete floors. It’s not too loud or bulky, and it’s got fairly good ergonomics. It stores well and stays clean with a wipe down after use. It’s a great tool and worth the extra cost as compared to lesser tools. AFTER 25 HOURS: This is a very good demo hammer, that makes my $900 Makita look very bad. I have broken up a patio slab, a slump stone wall and a garage floor without much effort, using the tools it comes with. It was shipped with additional brushes, but the unit has almost no wear in almost 40 hours of use. I am very satisfied with the unit, and spend evenings looking for new things to demolish, just to see what it can do. It has power to spare, and unlike many Chinese products, I am impressed by this demo drill, it will be used a lot, and I will not consider it a throw away any time soon.

I bought this for one job, busting up my concrete sidewalk. It did that job and then I just started using it more and more. For the price, the quality is great, the parts are all solid and the product works as expected. I would buy again if my current drill breaks in the future.

Bought this tool for one purpose, one project and was scared whether it would survive because it was the cheapest, I could find. To my surprise, not only did it perform perfectly, but appears will last for several projects. One thing to note, the instructions sucked regarding loading a tool into the unit. It took me some time to figure it out as the actions required in no way resembles the instructions. Simply push the chuck all the way down, insert tool until it clicks, then release. The tool is locked in place at this point. I was not able to adjust the position of my chisel, so had to hold the unit in an awkward position to get the right angle of attack. Rated this a 4 because the price makes me think it won't last near as long as a quality brand, but is great if you only need it for a couple or projects.

It covers what's expected - great drill, great hammer drill, and more importantly jackhammer! The hammer drill with the weight and handle behind your hold has amazing drilling capabilities. Was able to go into concrete and solid stone with no problem whatsoever - honestly, I was blown away. I've had some smaller versions of a hammer drill that really haven't produced - this one is like having the power of Thor in your hands. It's not too big and overwhelming but has enough power and weight to get most jobs done with no problem. The extras that come with this kit are 3 drill heads, 2 jackhammer plungers, and extra head, and an amazing case that has plenty of storage. Also comes with an additional 2 brush heads for the motor and lubrication oil and the head exchange wrench. Pros: - This thing is perfectly weighted in your hand whether pointing to the ground or hold straight out. Nice balance, they worked hard to make it feel great. - The power and control of the trigger are great - All of the different modes work amazing - The case is really well built - The machine feels well-built but not to heavy Cons: - It could've come with eye protection but maybe I'm over thinking this - if you're buying this, you're more than likely a pro or already have protective wear. For sure wear eye protection, I've actually found that wearing my shooting headphones is necessary when jacking up concrete - nothing unexpected there. For the money you can't go wrong - I was second guessing as soon as I hit the buy button for the cost of this hammer drill - glad I have it in my arsenal of tools now for sure. If you're looking - add to cart and hit checkout. Thanks AOBEN for a nice machine.

This rotary hammer is so good to use, totally worth every penny!

I've had this hammer drill now for a number of months and have used it for installing heavy duty screws and for breaking up concrete and rock for post installations. Quality is good and so far has proven to be a well made drill for the price. I would imagine that the hammer/chisel functions would be pretty hard on electrical devices and parts but most of my use has been chiseling rock and it shows no issues or faults. The included bits are great but one thing I bought and would recommend it a drill bit chuck that fits the chuck on it so you can use all of your standard drill bits with it. I just looked at it again on Amazon and it's 50% off on the day of this posting. So, half what I paid. If you can catch it on sale it's an even better value, but I'd still buy again at full price.

amazing deal. high powered and worked for what I needed to do. I had 4 big concrete patio supports that I dug out of the ground. they were too heavy to transport so I wanted to break them apart. I did need a sledgehammer a couple times since the drill bit got stuck deep in the concrete. I recommend searching on youtube for instructions for how to use this model drill. the instruction manual provided is basically useless.

Leaving this to help other folks like me who are on the fence about this product. I needed to drill ~100 holes in my crawlspace wall in insert mechanical fasteners to hold my vapor barrier. I also need to drill a 3 3/4" hole through my brick siding to install a radon mitigation system. After these jobs are done, I don't have much use for a rotary hammer so didn't want to spend big bucks. I started drilling 1/4" holes in my block wall for fasteners and it was taking FOREVER. Once this arrived, I cleaned out as much of the provided grease as possible and replaced with red tacky per some of the other reviews. I used this last night to wrap up my crawlspace project and this thing is WICKED. The 1/4" holes ~1" deep were produced in about a second. This drill easily paid for itself if the one job I've completed with it so far. I certainly don't intend to use this everyday, but it is a great addition for a DIYer who regularly bites off more than they should. Update after my latest project -- Installing a radon mitigation system and needed to poke a 4.75" hole through brick. I wouldn't say it was easy, but this thing was definitely up to the challenge. Took half an hour or so including breaks but worked like a charm.

Asta ahorita todo bien, tiene potencia isimos uso de el pero aún falta mucho trabajo x ASER aver como se comporta pero asta ahorita muy recomendable,....

This tool is excellent for drilling through concrete and was very good value.

Excellent value for the money!! Used it to break apart a 2 ton quartz boulder with a diablo bit... took only two days. Drill held up wonderfully and is still going strong! Impressed with the quality of the product. Would have given 5 stars for overall product if it didnt require grease all the time.... but thats a small inconvenience for the quality/price of the Aoben Rotary Hammer Drill. Would purchase another for a gift if they were still available.

I feel like the destroyer of worlds with this thing. Absolute tank that keeps going despite many hours of abuse, for about the same money as a rental.

Excellent pour mon usage. Beaucoup de puissance