Roof Rack, Universal Car Top Roof Rack Cross Bar Luggage Carrier Adjustable Window Frame Black Roof Bars

I bought these for a 03 lesabre and they worked great the Buick doors don’t work with either hook so you had to hammer them out and I also put Rivnuts into my car for a more permanent mount. Two years later or daily use there still in very good shape beside a little sun fade. And if you mount them good I’ve had 600lbs on them and they bend only a fraction!! Good value for the money

The rachet was manufactured and assembled in reverse therefore I was not able to tighten the bar unto my car roof. I should have tried it before cutting the crossbar, so I kinda screwed myself up on that since I can't return it. The overall rating would be No star but there is no option for it. Sturdiness: the material seems ok but I can't use it since I cannot tighten it. Value for Money: Not recommended Easy to Install: It would have been but it's useless since the rachet does not function properly.

I was expecting a cheap use one time rack but to my surprise it was better than expected, been using it now for three weeks and it is still solid and tight on my roof. The only problem I had was the lock, The key felt like it would snap if you turn it with too much pressure and it is difficult to turn the key without too much pressure. I just slowly turned it little at a time while gently shacking the rack. it is real solid now and I would buy it again if I need another one.

El producto funciona a la perfección tal como dice la descripción del mismo

The product is great until you start mounting it to the vehicle, and you start realizing a week spat between the door jamb hook and the silver strip that tightened down in the system is fragile. The two side hooks on the silver peas start bending by trying to tighten a little extra, and the not that holds the feet need to be replaced with a nylon lock nut. My advice to the manufacturer, 1. The silver strip that goes into the system for tightening needs to be redesigned into a V hook style where it attaches to the door jamb hook, and the top of the hook needs to be somewhat anchored down to the silver strip itself, so it does not loosen down during tightening 2. Door jamb hook hole needs to be dropped further down for Extra Strength with 10 degrees angle option if needed. 3. The feet nuts need to be replaced with nylon lock nuts, and feet need to be reinforced with steel or with extra plastic cone style fill 4. The anchor silver strip goes inside into the system for tightening. The backside of it needs to be filled with extra Steel to strengthen the grid for stronger tightening. If those things get redesigned correctly, in my personal opinion, it'll be the best roof rack on the market capable of carrying a 150LB load and having unlimited wind gust resistance. Slavic D.

This worked out well but the directions are horrible. Find a video walk through of how to put together and you will be fine. After putting to together these worked out to be great. I placed a cargo basket on top of them then about another 70 pounds and no problems at all.

Ratchet device slips. when you get it to what you feel is the proper tensiln. After it slips it is done, just trash it. Not worth the money spent. I even tried to modify it, slightly better but I cannot trust it. Instructions are a disaster, I had to watch a youtube video to figure it out. Tool refered to is nonexsistant. It is well constructed as far as the product goes, but the clamping system does not work as promissed. Save your money buy the second cheapest roof rack on AMAZON

So far they fit right for the car haven’t had them that long, but seems OK. Paint was a little easy to come off in one piece that covers the lock but other than that.

It’s a great product that could really use assembly instructions. What should have taken 10 minutes or so took over an hour; the first 50 minutes being spent trying to figure out how to assemble it, and then 10 minutes to do it.

Tres compliquer