Prepac Simply Modern Nightstand Bedside Table, Natural Oak Nightstand for Bedroom, End Table with 3 Drawers 26.5" W x 26.75" H x 16" D

This is a very well made, sturdy cabinet, with easy sliding drawers. I searched far and wide for one with solid wood material inside and out, that would support heavy weight, because I had to set another heavy obstacle on top of it. every cabinet that I previously found had fabric drawers, or was plastic. I was surprised how many pieces they were able to pack in such a compact box, but it fit together so perfectly and formed a true to advertised size cabinet...I was very pleased with the outcome once finished. I was so relieved that my package wasnt stolen before I was able to receive it, however, because my specific directions to the delivery driver was to bring it inside to the reception clerk, because it is my place of business, and to not leave it outside the door, but bring it back next business day... and they left it outside the door anyway all night on the traffic side of our shop. I was notified via email, and I was able to have the owner go up there and take it inside before it was stolen, so I got lucky, but I hope next time my delivery directions are heeded better.

Product came well packaged with no damage, which is always a concern with this type of furnitature. Takes approximately 1.5 hours to put 1 unit together. Instructions are pictures only but it is prety easy to figure out. This product is 100% partical board, with only drawer sides being pine boards. Color is a deep choclate brown and looks nice. Parts went together well using the cam system and dowels. I am a perfectionist so I used wood glue on all partical board to partical board joints or wood joints as you can not crank down too hard on these cams or your will break the partical board. This makes it way stronger and a much better end product. I think the peices could come apart if you move it around so gluing is recommended. Mine woun't come apart now! Drawer slides work very nice being metal and they are sturdy if you glue as I did and open and close great. This is a good size to a taller bed at 29 inches tall. For my sons appartment or a spare room these look nice enough. Also comes with brown marker to touch up and scratches. I bought the dresser as well but havent put together yet but expect it to be the same. These are heavy like all partical board so ladie might need some help. You need to use coasters or protect top from wet glasses so finish does not bubble up. For the price I think its worth it, for the right room.

The Prepac Simply Modern Nightstand has a beautiful, clean, and minimalistic design that fits perfectly with my room’s style. The quality feels solid and sturdy, and once put together, it looks like a much more expensive piece of furniture. Assembly was pretty straightforward, but it was a little annoying that none of the pieces were labeled. It made me spend extra time double-checking which part was which. Once I figured that out, the process went smoothly and didn’t require any special tools or skills. Overall, I’m very happy with the finished product. it’s sleek, modern, and functional. Just wish Prepac would label the parts to make the assembly even easier.

It takes me awhile to pull the trigger on purchases here and I am glad I took the plunge on Simply Modern. Some thoughts: Good 5 warranty on parts, unexpected Foam used in packing was wrapped, no trail of Styrofoam. The furniture pieces, while not uniformly marked, were easy to identify based on shape. Heads up, the drawer sides are marked left and right. Not so good The bags of nuts, cams, nails, etc were jumbled and unlabeled. I needed to use more than 1 bit on my screwdriver. If I need more than 1, I expect to be told. The back was a disappointment. I hate when the back is attached by nails. It's a sturdy piece but would have been better with a more substantial material. I know I sound really negative but I gave the dresser 5 stars because it is a great value. I was able to assemble the unit by myself in a reasonable amount of time, with experience and a good screwdriver set. The drawers are deep and the sides are real wood.

Love this 3 drawer night stand. The color is exact as pictured. Took my husband & I around 1 1/2 to put together. We are both in our 70’s so it was a little difficult being on the floor. Although the finish product is beautiful

Is easy to assemble. Seems very sturdy. Was delivered on time. But it is missing a few screws. Contacted the company for replacements

Wood color is a bit darker than the picture but that makes me love it even more. The grain is a beautiful deep-chocolate color. It's well made and very sturdy. It feels high quality and expensive and putting it together was simple because instructions were easy to follow.

Summary: This nightstand came together with a few alignment and material quirks during assembly, but the final result is sturdy, functional, and works well for everyday use. The drawers fit properly, and the included touch-up markers were a thoughtful addition for minor cosmetic issues. ⸻ Full Review: We purchased this for our toy room to store smaller items like my daughter’s Barbies and accessories, and overall it serves that purpose well once assembled. The finished piece looks nice and feels stable, but the assembly process had a few things worth noting. 🛠️ Physical Installation / Setup & Assembly: We’ve been assembling a lot of items in a short period of time, many of which require a high number of screws. After one of the more intensive builds, my husband’s hand actually locked up from extended use of a manual screwdriver. For this and similar setups, we added a compact electric screwdriver tool to our assembly process, which made a noticeable difference. There is a short learning curve when it comes to controlling the torque, but once you get used to it, it significantly reduces strain and speeds up furniture assembly. He still switches back to manual tools and a standard screwdriver for certain steps, but uses the electric tool for the majority of the build now. From our experience, we’ve been getting roughly 60–120 minutes of intermittent use per charge during predrilled assembly, which has been enough to handle hundreds of screws across larger builds. Charging has also been quick, typically around 60–90 minutes for a full charge. Runtime will vary depending on the material and whether holes are predrilled, as non-predrilled assembly requires more effort and can reduce battery life. In our case, even with some non-predrilled sections, the screws went in very easily and didn’t require much effort. This has been especially helpful for reducing repetitive strain during longer builds, particularly for anyone dealing with hand fatigue, wrist strain, or similar repetitive stress issues like carpal tunnel. For this type of setup, we used the DEWALT 8V MAX Cordless Screwdriver (gyro control, USB charging): https://a.co/d/0gXtIjvh Assembly took approximately 1 to 1½ hours, although some of that time may be attributed to my husband taking extra care to meet my preference for a well-aligned, scratch free clean final appearance. During assembly, the pieces were only labeled “R” and “L,” which made identifying parts a little less intuitive. Some of the wood had slight warping, although it was mostly in areas that are not visible once assembled. The back panel is sturdier than the very thin cardboard you sometimes see, but it still requires hammering in a large number of nails. Even when aligning the screws with the pre-drilled holes in the drawers, the back of the drawer does not sit perfectly flush, which made us question whether it was due to slight warping or alignment tolerances. While trying to adjust the first drawer alignment, my husband lightly used a mallet and it resulted in a small hairline crack. It’s still fully usable, but it does show that there isn’t a lot of tolerance if you try to force alignment during assembly. On the positive side, the company included stain markers to help cover minor scratches, which was a thoughtful touch. Once everything was put together, the drawers fit in without any issues and function as expected. The drawer sides are real wood, while the bottom uses a thinner lightweight base material similar to the back panel. The drawer bottoms feel better suited for lightweight storage and occasional-use drawers rather than heavier everyday storage or higher weight items. I would personally avoid treating these as high weight capacity drawers, but for lighter toy storage, Barbie accessories, craft supplies, nursery items, or other small lightweight items, they are a perfect fit for what we needed. For lighter toy storage, Barbie accessories, craft supplies, nursery items, or occasional-use drawers, this works well and looks nice once assembled. If you plan to store heavier items or use the drawers heavily every day, I would personally look for something with thicker drawer bottoms and tighter alignment tolerances. ⸻ ✅ Pros: • Sturdy and functional once assembled • Drawers fit properly and work well • Back panel is thicker than typical cheap backing • Includes stain markers for touch-ups • Real wood drawer sides ⸻ ⛔️ Cons: • Minimal labeling (only “R” and “L”) • Slight wood warping in some pieces • Back of drawer does not sit perfectly flush • Requires many nails for the backing • Limited tolerance during alignment adjustments • Drawer bottoms not suited for heavy items ⸻ ⭐ Final Thought: Despite a few frustrations during assembly, this turned out to be a solid and functional piece for our space. My husband rated the overall experience a 9/10, which reflects that while there were some quirks, nothing prevented it from being usable or worth keeping. I would purchase it again for a similar use, especially where minor imperfections won’t be highly visible. I tried to cover the details I wish I had when I was deciding, so it’s easier to figure out if this fits your setup and how you plan to use it.

I bought two of these night tables and was pleasantly surprised especially for the price! They are MDF but it is thick and solid. It took about 2.5 hours to put them both together but the directions were well done and concise. Be advised you will need tools that aren’t included to assemble- a Philips head screw driver and hammer. Lots of screws and cam locks but the end result is sturdy and attractive. I’m a bit concerned that it comes with a marker to fix scratches, I assume it will probably scratch easily but I’m planning to protect the tops with silicone mats to avoid that and any water damage. I would recommend these as an affordable piece of furniture

So happy with this purchase! After spending a month trying to find the perfect nightstands, these surpassed our expectations. Great quality, perfect size and great price. Also a Canadian company which was a bonus. Wish the had the matching chess. Will buy once it is available!!

Let’s start with delivery/packaging. It arrived three days earlier than expected and I managed to drop it when exiting the elevator (it’s rather heavy for an average female) … and I mean I DROPPED it. Landed on the corner, bounced on to the end and then the elevator door gave it a smack just for good measure. But I’m happy to say that it was packaged so well that nothing in the box was damaged. My hand didn’t fare so well, but that’s another story. The unit was very easy to assemble - not sure what directions the other reviewers were looking at, but the ones included with the unit were clear, step-by-step and pretty much idiot-proof (yes, I am referring to myself). It took me just under 45 minutes and I was taking my sweet time, checking and double checking everything. It is solid, the drawers are very smooth and it looks great. For the price, you really can’t beat it.

A good purchase however you get the quality you pay for. The unit looks good and is sturdy, with metal slides and rollers on the nightstand and each drawer. The pictures are an accurate representation. I purchased two units and am very handy with mechanical things, but I offer the following observations and suggestions that may be helpful for deciding on whether or not to purchase or to make your assembly easier: 1) This nightstand is essentially all MDF with virtually no solid wood. The back of the unit and drawer bases are cardboard. The finish is a "foil" similar to many IKEA products rather than wood veneer. 2) It took me 2 hours to assemble the first unit I purchased, and 1.5 hours for the second unit, going pretty steady without any breaks. There are many small pieces of varying sizes and functions, and great attention is needed for correct orientation of pieces. The manual is not explicit on some critical elements of sizing and orientation for many pieces. If you are a type of person who gets frustrated with complicated IKEA-type assembly projects or don't consider yourself handy, you probably won't like this project. 3) There are many hidden "zinc cams" that serve to provide the mechanical joins on metal dowels screwed into the MDF board. Note that 24 of these cams are all thrown into a bag and appear to be all about the same size. Unless you really pay attention to the fact that some are large and some are a bit smaller, it's easy to use a smaller cam to make a join when a larger cam is essential. Drawers take ONLY the smaller cams, and drawers do not take larger cams, so if you make a mistake, you will need to disassemble pieces of this unit you've already assembled to ensure proper completion. Step 3 of the instructions (interior bracing boards) do not specify the size of cams: only use the larger cams at this point. 4) Cabinet slides and drawer glides for the nightstand utilize a very specific orientation to work correctly (not explicitly noted in the instructions). Cabinet slides need to be oriented so that when the unit is finished and ready to accept the drawers, the drawer glide rollers can drop into the slides through an indentation on the cabinet slide. This is a subtle feature of the cabinet slides, and I made the error my first time of installing all the cabinet slides "upside down," which prevented the drawers from being inserted correctly. 5) One thing the instructions don't indicate is that the drawer slides are stamped DL and DR (Drawer Left, Drawer Right), and it helps with their proper installation to note this when you are pairing with wooden drawer sides (which are stamped L and R on their ends). I've attached some pictures of the correct orientation of the cabinet glides and drawer slides in the assembled unit. I consider these units to be disposable: they have been purchased for use within a nursing home and I don't expect more than a limited life for perhaps several years. Nevertheless, I still consider them to be a good buy for my purposes. Similar products preassembled and using all wood with better finishing are approximately three times the price.

Just as advertised. It’s easy to put together with the instructions and they also provide you with a website to watch videos if you’re uncertain. Very satisfied with the quality and I bought two.