Bicycle Combo Mount Adapter,Computer Bracket Camera Adapter for Garmin Edge 200 500 510 520 800 810 820 1000,Gopro Camera and Bryton Mount

As a Go-Pro mount it does the job (though I'm using it for a front light that uses the same fitting). Simple enough to install if the bolts are the right length, and it should be pretty durable. It would be nice if the larger bolt (holding the device to the mount) had a thumbscrew on it as well as an hex key socket to make the device easier to remove, but it's not a deal breaker. *** Garmin users - Be aware *** This isn't designed for the Garmin Flush out-front mount, so do check which one you have, but with the purchase of some 15mm M3 bolts ( https://www.amazon.co.uk/dp/B00SN3T15Q/ ) it works just fine. Really you probably need 14mm bolts rather than 15mm, so be very careful not to overtighten them or if they're raised above the thread they screw into on the Garmin mount they *will* damage the device in the top of the mount. Or just do what I did and file them down to 14mm then you can tighten them a little more.

You're looking at this because basically the GARMIN logic of a bracket design isnt helpful! You want to place a light or camera at the front of your bike but the design of the GARMIN out front bracket messes with your good plans. So bare with me.... the bolts received with his adapter is too short to screw Into the GARMIN bracket. M3 bolts or screws fit perfectly into the bracket but the length is an issue. 10mm are too sort. As pictured the 20mm are too long. Of you can find 15mm you'll be quids in! As pictured the 20mm fit but I've had to use washers to take up space. Using nail varnish to lock screws Into my adapter. Soon as I can find M3 x 15mm I'll swap them over for a better fit

Having tried a few different mounts for my GoPro this one wins hands down. I record my rides for use on Kinomap and this mount tucks the GoPro under my Garmin mount nicely. Solid fixing, no vibrations and perfect video quality even when going off-road. The supplied screws were too short for my Garmin Edge 530, I had to buy some nearly twice as long but worth it. Recommended.

I will admit at this stage I have not tried with my GoPro out on the road. However submitting review to say it fits perfectly under my out front Garmin mount for my Canyon bike. Removed original screws holding the half turn locking plate and screwed this mount through to the locking plate using the screws provided. They were perfect length.

Overall the product is well constructed but the screes are to long so much so I can't put my Garmin back on..shorter screws and it's spot on

Used to connect Cycliq Fly12 to existing Garmin out front mount. Being Aluminium & coming with locktite bolts that match existing 1/4 turn mount made this a doddle to fit. It'll be ideal for GoPro attachment to. Excellent product.

If used on the correct Garmin out front mount it fits perfectly and no issue with screw length. Used to hold a GoPro on a 600-mile tour with no issues. Only slight criticism is that if you’re using the GoPro ‘bolt’ with finger grips, it doesn’t tighten completely. It’s just enough to stop the GoPro moving by itself but if you push it, the GoPro does move. Maybe the supplied bolt would be tighter but as that requires a screwdriver it’s a bit too faffy for something you want to take on and off regularly. Overall, did the job I wanted.

So this is great! It comes with everything you need to covert your standard garmin mount to one that will take a GoPro mount. The only issue I found was that the bottom of the out front mount that came with my garmin was not flat. To solve this I used a file and flattened the bottom so this could mount flat.

perfect with canyon garmin mount

Bien

La staffa è ben fatta in alluminio , solida e rifinita. La uso per attacco luci e anche Go pro, in base alla mia necessità.Consigliata!

Si vous cherchez un adaptateur pour mettre au dessus votre GPS Garmin et en dessous votre lampe en utilisant l'attache Garmin. Cela ne convient pas.

Great quality - aluminium body. Honestly might last longer than my out front haha.