Q: Where to set adjustment lever for a lp gas fireplace? i tried 0.4 (factory setting / gas <90% eff) and fireplace had lower flame than before.

this unit only activates a contact that is activating buy the temp that the setting is placed at, it does not control the amount of gas at your fireplace, or how the flame is burning

Question 1

will this work with a 750 mV system?

Accepted Answer

I had this thermostat installed in one of my rental units.  It worked great for about 1 year.  My renter complained of the heat not coming on at the agreed upon temperature set point (72 degrees F).  My renter would increase the set point and the heater would then come on.  After investigating the situation, I discovered smoke had contaminated the thermostat contacts.  After cleaning the contacts the thermostat would function as designed until smoke contaminated the contacts again.  I installed a thermostat having sealed contacts which solved the problem.  So, bottom line, yes this thermostat will work on a 750 mv system.  However, if this thermostat operates in a contaminated environment be prepared to clean the contacts periodically.

Question 2

I have 3 wires,This thermostat has only connections for 2 wires.Can I still use it?

Accepted Answer

This will depend on your situation.  If you are just trying to use it for turning on and off a heat source, then it should work just fine.  Follow the instructions carefully.  Even though you have 3 wires, I'm guessing one of the 3 is not being used.  Follow the wire to the other end and see if all 3 wires are hooked up.  If there are only 2 hooked up, those same 2 wires will be what you use at the stat.  The stat is just like a light switch, just lower voltage.  Power will come from your transformer, through the stat, then to the device control you want to turn on.  If you have a unique situation and need more help, you can take some pictures and describe your application and send them to me at samoore@parker.com and I will do my best to help you out.

Question 3

is this a 2 wire connection?

Accepted Answer

yes 2 wire, but be careful...no off switch even though picture may show one.

Question 4

Where to set adjustment lever for a lp gas fireplace? i tried 0.4 (factory setting / gas <90% eff) and fireplace had lower flame than before.

Accepted Answer

this unit only activates a contact that is activating buy the temp that the setting is placed at,  it does not control the amount of gas at your fireplace, or how the flame is burning

ASIN	B000BQWADS
Backlight	Yes
Brand	Honeywell Home
Brand Name	Honeywell Home
Colour	Almond
Connectivity Protocol	Wi-Fi
Connectivity Technology	Wired
Control Method	Touch
Control Type	Dial Control
Controller Type	Hand Control
Controller type	Hand Control
Customer Reviews	4.3 out of 5 stars 2,492 Reviews
Display Type	Manual
Finish Type	Matte
Global Trade Identification Number	00085267262392
Included Components	Thermostat, Decorative Backplate
Item Dimensions D x W x H	2.2D x 7.9W x 7.9H centimetres
Item Shape	Square
Item Type Name	Non-Programmable Mechanical Thermostat
Item Weight	68 g
Manufacturer	Honeywell
Manufacturer Part Number	CT30A1005
Material Type	bimetal
Model Name	CT30A1005
Model Number	CT30A1005/N
Model name	CT30A1005
Mounting Type	Wall Mount
Number of Items	1
Number of Packs	1
Power Source	Low Voltage Control
Product Style	Classic
Product dimensions	2.2D x 7.9W x 7.9H centimetres
Special Features	Programmable
Special feature	Programmable
Specific Uses For Product	Commercial/Residential
Temperature Control Type	Heating
UPC	085267262392
Unit Count	1.0 count
Voltage	120 Volts

Honeywell CT30A1005 Standard Manual Economy Thermostat, Almond, 0.6

Details

Details

Description

Specifications

Reviews

Common Questions