REOLINK Junction Box RLA-JBS1 for Bullet Cameras

A bit pricey given the very good pricing of Reolink cameras. Slightly different than photo - lid has many partial holes (obviously for other models) and a sticker showing the ones actually drilled and tapped. Sticker needs to be removed if installing in possibly wet areas. Perfect fix; makes for a very nice and neat install of Reolink cameras without leaving the connector pigtail on the camera exposed. Will be buying more. If installing outside, I recommend putting a bead of caulk on the bottom of the camera before screwing it to thejunction box.

Had an older Reolink camera with triangular holes - that didn't quite match up with the ones listed as compatible. By using a larger drill, I opened the holes in the camera up so they matched close enough and did a mount. Looks fine and very tight enclosure that was easy to mount. A bit expensive, but perfect for the job.

Nice junction box. Makes installation look more professional. Fits variety of cameras. Easy to mount. In my opinion its definitely worth buying. Protects your wires also.

Waterproof box that works for mounting Reolink PoE cameras. Hole sizes in sides and back of box is between 1/2 and 3/4" conduit connectors. I planned to use 1/2" LT NM (liquid tight, non metallic) flexible conduit to shield cables from sun/UV. Learned these boxes do not take standard (US NPT) connectors. Found the 1/2" LT connectors could be made to work. Take the O ring off, turn the lock nut around and super tighten to the box. If you only need cable seal these are fine. Camera mount screws are M4 0.7 pitch. WEILAILIFE [B0C3VZ1CPX] Universal Camera Junction Box is another option that uses 3/4" NPT connectors and also the M4 0.7 pitch screws for mounting cameras for about $14. Do like the feel of the Reolink boxes better.

Worked great

Compré 2 unidades para un par de cámaras Reolink RLC-810A de tipo bala, por 2 razones: 1) Instalar la cámara sin dejar expuestos cables usando para ello el espacio en la propia caja de conexiones 2) Facilitar el reemplazo de la cámara por otras en el futuro del mismo tipo sin tener que volver a perforar la pared ya que ésta caja cuenta con varios tipos de perforaciones estándares usadas por las cámaras Reolink de tipo Bala. Ambos objetivos se cumplieron, espero que Reolink siga sacando sus próximas cámaras de tipo bala con éstas mismas perforaciones, todo indica que así será. Lo positivo: Excelente calidad de construcción, a la par con la calidad de construcción robusta de las cámaras Reolink, es metálica y con diferentes círculos de perforaciones para la mayoría de los tipos de cámaras de Bala de Reolink, viene con todos los pernos necesarios, las perforaciones de la cara pincipal son ciegas (no son pasantes) por lo que en aquellas perforaciones que no se usan, no entra agua. Lo Negativo: El precio, el par de soportes me salió un poco mas barato que una cámara lo cual considero algo caro. En un principio me dio la impresión que las perforaciones del soporte no coincidían al 100% con las de la cámara pero con un poco de paciencia finalmente calzaron bien, enroscando un poco un perno, pasando al otro y luego al otro, sin necesidad de recurrir a ningún tipo de modificación de nada, quedaron bien y firmes. Si vas a montar la cámara en un lugar difícil de acceder, recomiendo, 1- Perforar la pared 2- Armar el cable POE 3- Pegar la base de la caja a la pared 4- Finalmente llegar con la cámara ya atornillada a la tapa unir los cables y cerrar.

This makes mounting and hiding the wires on the camera a breeze. Definitely recommend if you cannot put a larger hole on your wall.

Advertised to be compatible with my Reolink Bullit cameras. I worked for over an hour to make it work but the holes are a fraction off from lining up. Had to return it.

Holes don't line up. PITA to install cameras

I ordered 5 of these. Two arrived in blue Reolink-branded boxes, while the other three came in plain brown boxes. The units in the blue Reolink boxes are noticeably better—they include a hook between the junction box and the mounting plate, which makes installation much easier. The ones in the brown boxes do not have this feature. The inconsistent packaging and product design were disappointing, especially when ordering the same item.