ECOTRIC 46.2 X 26.8 X 38.7 Inch Hitch Cargo Carrier W/Ramp Foldable 500 Lbs Trailer Hitch Mount Steel Wheelchair Carrier Mobility Scooter Ramp 2" Hitch Receiver for Snow Blower SUV Truck Van Car

I have not put it together yet but in box it is very heavy. My son is guessing 60 lbs. I would say 60-100. I found another like it same price but receiver part was steel but rest was aluminum. This 1 is all steel. In reviews 1 guy said he had to weld a peace to make it work on his Trk. Well U can't weld Aluminum to steel so I got this 1. Also if it should crack or need repair U can weld. I got it to take snow blower over to my sons when needed and hall my red trailer on with grass for garden. This will be much easier than the bigger trailer. OK I put it together and on the trk. It is very well built but instructions need some help. It tells what bolts go where and the pins. I took it apart 2 times and put it together 3 times. 1rst I put the Tung on wrong. U want the ramp to drop on passenger side so pay attention to hinges. Only 1 of 2 ways to do it I did it wrong. Than there is 2 bolts. 1 long and 1 short. Long 1 goes through tung and piece that goes into trk hitch. Short 1 goes into threaded hole under it to level. On tung there is a small piece of steel welded on bottom of tung for added strenght. It was used but not needed. There is a pin with S pin for it. So with long bolt and pin there is no leveling. Maybe to lock it? Well I did that wrong also. 3rd times a charm. The piece to pin the ramp up and down I had to put about 6 washers to move it out cause ramp was 2 close to frame. I got the ramp at a 90 degree pin to line up but 1 that pins it down to platform I need to drill out bigger for adjustment for lower pin to lock ramp in a not in use mode. Also none of it is not standard. Most metric and some don't know. Ended up using 2 crescent wrenches. It is heavy. I took out of box in house read instructions and took out in pieces in morning. It took me all day to assemble and on trk so still need to drill hole out. Now I could put together in couple hrs. I would buy it again but see no need to. It will do what I want to. I also went back to amazon's add and took some picks with phone so I could enlarge and see better. There is a small bag with blk nuts and washers. Put in pocket. I didn't see and wind blew away along with instructions. Found latter when done. Also peace that goes into trk hitch has a added piece welded on for wear. The tung should set down from top. LOL I hope this will help U do it in 2 hrs and not all day. Also the reflectors are very small. I got 2" X 50' here on amazon will put bigger and more than what they sent. Only thing is that my trk sets high but I can pull up on street and drop past the curb gaining 4-6" on ground height. Good luck.

Not the greatest to assemble but I knew that from the reviews. The best advice I can give is get it into your receiver first then finish assembling it and you will have less problems. I love this thing, it's made my weekly doctor visits quick and painless. I can go to the mall now without trying to get my scooter in and out of my mini van with ramps. This model folds up good and right to the back window. Good stuff. We had some leftover nuts and washers. Update 1 year later now. I had to add carabiner to the front and back holes to use my ratchet tie down for my mobility scooter. Wish the ramp was 1 foot longer but it does exactly what I need which is haul my scooter daily. Get a can of WD 40 to go with it and keep the moving parts well lubed

Did not have all the parts. Not enough screws or bolts or lock nuts. Holes uneven, not able insert s bolts. Had to go to the hardware store to buy what was needed to put it together. Very disappointed in this product.

Works for me A bit wobbly could use some extra tightening device

Came with detailed information on assembling including parts list and clear pictographs. A little wobbly but description stated that before purchasing. 30ish minutes of assembly. Following instructions everything lined up with Zero issues.

I read review after review, checked out the pictures, etc. I decided on this one because the biggest complaint was the assembly instructions (yes, some other issues too, but not as bad as other carriers), and figure I have friends who can help if needed on that. It is heavy, which is good in my opinion. The instructions received had multiple double-sided pages with the list of components, and the order of assembly. It still was confusing as it had no real written directions (such as - how tight do you bolt the platform to the hitch bar? There is a gap - should there be?). Otherwise, I assembled it myself (I'm not super with this type of thing) with only direction reading by my 84 year old mom. So yes - better instructions would be very helpful. All of my bolts / holes lined up except the spring-lock to retain the ramp into the platform when not in use - it never lined up, but I am using straps to keep it in place. It rotates easily, and while my truck sits higher than a car hitch, we were able to load / unload the scooter with a little pushing and lifting (grade was a bit steep for easy loading). I plan to add a rubber mat on the platform to protect the scooter during transit, and also a strap as a secondary safety measure to keep the platform in an upright position when transporting the scooter. I had a vision of it popping loose & flopping over on the highway...not that it has at all. In the upright position, it doesn't come even close to the back of my truck, and when it is down, I still can open / have access to the back of my truck. There is one other thing to be aware of - when not "in use" and mounted upright, it does rock a bit back/forth which I have found messes with the retaining pin. When I assembled it, it worked well, but after a few trips, I now have to push up one corner of the platform slightly to get the pin back out. That all said - it doesn't vibrate or rattle, even when not in use (upright). I haven't noticed any bending of the metal, and the scooter rides really smoothly so far. Will update if anything changes.

Fantastic 😊 now my wife can be safe getting around and made life easy,made very well.the moble cart fits on its good.

As others said about the instructions, they seemed to be missing a little something. But everything lined up. And all of the parts were included. Took about a 30-45 minutes to put together. I'm going to use it to haul a lawn mower, we will see how sturdy it is. Seems sturdy though.

Anyone looking at this item be very very aware that this is definitely a two man lift and a 3 man to fit it And it’s taken me nearly a month to have it collected Buyer be aware

Thanks for the great craftsmanship!